Find a Surveyor you can trust in Ottery St Mary.

Basically, a chartered surveyor is a building surveyor who inspects a property for faults or defects as well as future issues or problems. They’re also able to work out the value of a property and also prepare a report in order to help you determine whether or not the property is a good investment or if there are any issues that may create problems later in the future such as damp, structural issues and the likes. In order to become chartered surveyor, a surveyor will need to undergo additional qualifications and possess a specific level of experience which is RICS (Royal Institution of Chartered Surveyors) approved. It’s possible that some surveyors may not have pass through these additional levels to become chartered, however it’ll still be regulated by RICS and be fully qualified. These can be termed as Assoc RICS, associates or building surveyors. While you don’t necessarily have to use a chartered surveyor for your survey, it’s highly advisable to use RICS approved experts.

Just like any other building surveyor, chartered surveyors work by visiting the property, assessing various areas while also determining any defects on site. Once done, they’ll then state all findings in a report for you to help you make the best possible informed decision, whether or not you’ll want to go ahead with the purchase or re-negotiate the terms of the purchase based on the findings in the report. 

You’ll need to hire the services of a chartered surveyor after you’ve made an initial offer on the property and it has been accepted. Most offers are made “subject to survey”, in order words, the seller is well aware that if the survey reveals something unexpected, you can decide to back of the agreement or request a reduction in price.

If you’re thinking about hiring the services of a quantity surveyor for your next building project, then you might probably want to know how much its going to cost to enable you set a budget and start to plan. However, there’s no single and straightforward answer to this question as the price of a survey is dependent on a wide array of factors. The primary drivers include the scope of the construction, the complexity of the property, the level of skill required to make appropriate assessment of the property as well as the level of liability that will be covered by the quantity surveyor. In a more simpler terms, the cost of a quantity surveyor is determined by the size, age, condition, complexity and to some extent agreed purchase price.

Generally, most quantity surveyors are charged out at a rate of £100 per hour. And as a result, the price of a quantity survey is related to the number of hours that’s going to take to make an in depth assessment of the property. Typically, several quantity surveys will take up to half a day on site with a further half going to the production of the survey report. Consequently, it would be totally fair to say that a quantity survey would cost you anywhere within the range of £600 to £800 plus VAT. For a less detailed and simpler survey such as RICS Homebuyers Report and Valuation, you can expect to use only a couple of hours on site which will also be topped by a few hours of work in the report production. As a result, the normal cost of a Homebuyer survey would be between the range of £400 to £500 plus VAT. However, you should take note that the prices can vary on a geographical basis.

The main distinction between a Building Survey and HomeBuyer Report is that the survey is a great deal extra thorough, and offers you a highly comprehensive testimonial on the condition of your home.

Both major types of property survey from RICS are the Building Survey as well as the HomeBuyer Report. Although it is down to you, as the owner or buyer, to pick which survey is the right one for your requirements, there are some guidelines in place to aid you determine.

A HomeBuyer Report is generally far better for properties that:

• were built within the last 100 years
• are of even more conventional style
• are constructed from typical building materials
• are in a practical problem, as far as you can inform

A Building Survey is generally much better for residential or commercial properties that:

• are much older and developed greater than 100 years ago
• have gone through significant expansion or change
• are a lot bigger as well as supply considerable holiday accommodation
• you plan to change in the future
• are of non-traditional fabrication.

Generally, you wouldn’t need to get in touch with a quantity surveyor prior to purchasing a property, unless of course your property is a very unique and unusual one. After making a commitment to buying a property or to kick start a construction project, then you might want to start taking into consideration getting in touch with a quantity surveyor. The best time for a quantity surveyor to carry out an inspection of the property is right after settlement and just before the tenants moving in. This is to ensure that the quantity surveyors do not disturb the tenant and they also get to fully go through what you’ve purchased as well as the condition it’s in.

Quantity surveyors will help you by working with architects, accountants, engineers, building owners, builders, developers, financiers, government, insurance underwriters, loss adjusters, sub contractors as well as solicitors. What’s more? The in depth knowledge quantity surveyors possesses when it comes to construction costs enables them to carry out a number of useful tasks to help you.

Prior to construction, quantity surveyors can prepare a feasibility study, estimate to defined the project budgets, carry out an analysis to refine the budget as the design documents develop, prepare Bill of Quantities so as to help with the tender process and also to carry out a review of Builder’s tender submissions. While the construction is ongoing, they can help provide cost control services, carry out an assessment of the builder’s progress claims and also undertake an assessment of variation and delay claims. Finally, after the construction, they can assist with the determination of the final project cost, prepare the tax depreciation reports for both investors as well as property owners and also prepare Expert Witness reports to assist in the settlement of building disputes.

If you wish to work as a quantity surveyor or perhaps you’re just looking to hire one, then one of the first things that comes to mind is the qualifications to look out for. To work as a quantity surveyor, you’ll normally require a degree in quantity surveying or commercial management which is accredited by the RICS (Royal Institution of Chartered Surveyors). However, in the event whereby your degree as an undergraduate happens to be in a different subject, there’s still a chance for you to become a qualified quantity surveyor. To achieve this, all you need do is to take a Royal Institution of Chartered Surveyors accredited post graduate conversion course. Degrees that this applies to includes the following: Economics, building or construction, geography, civil or structural engineering, mathematics, project management ( construction) as well as urban and land studies.

Typically, the post graduate course will take about a year to complete ( on a full time basis), whereas it takes about 2 years on a part time basis. What’s more? There are some employers that will recruit some graduates as “non-cognates ( meaning those with a non RICS accredited degrees ) and support them financially through the accredited post graduate course. Furthermore, you can as well take a RICS accredited degree apprenticeship whether undergraduate, PGDip or Masters, in quantity surveying as well as project management that combines work with part time study at a university.

However, if you’re without a degree, there’s still an option. Simply start work as a technical surveyor ( also referred to as surveying technician ) and then apply for a part time study while working to qualify as a quantity surveyor.

Common reasons you may need a structural engineering inspection are

1. Bowing/cracked foundation
2. Settlement or wall cracks
3. To remove a wall in a remodel
4. Add solar panels to a roof
5. Add a second story to a home

Generally, quantity surveyors are tasked with the calculation as well as management of the costs relating to projects, starting with assisting with the initial estimates to finalizing the overall requirements of the budget. Normally, they work in land management, property as well as construction industries. Quantity surveyors are usually engaged at the start of a project, consulted and brought in to take a look at a planned construction’s feasibility or repair needs, they then subsequently supervise the remaining activities during the capital expenditure phases of the project development.

Quantity surveyors will help you by working with architects, accountants, engineers, building owners, builders, developers, financiers, government, insurance underwriters, loss adjusters, sub contractors as well as solicitors. The extensive knowledge they possess about the costs related to construction allows them to undertake a number of meaningful tasks to assist you with your project.

Before the construction work commences, quantity surveyors can help with the following:

• Preparation of a feasibility study
• Estimation to define the project budgets
• Carry out an analysis to refine the budget as the design documents develop
• Preparation Bill of Quantities so as to help with the tender process and also to carry out a review of Builder’s tender submissions.

During the construction process, quantity surveyors provide the following services:

• They can help provide cost control services
• Carry out an assessment of the builder’s progress claims
• Carry out an assessment of variation and delay claims.

Finally, after completion of the construction project, quantity surveyors can assist with the following:

• Determination of the final project cost
• Preparation the tax depreciation reports for both investors as well as property owners and;
• Preparation Expert Witness reports to assist in the settlement of building disputes.

With all the aforementioned responsibilities of quantity surveyors, you may be tempted to think that they’re only involved in large construction projects, but this is totally wrong. Quantity surveyors are able to offer their services to both residential clients and small business owners, asides from working with local authorities, commercial businesses, consultancies as well as property developers.

Structural Engineers are experts in the structure of establishments (structures, wall structures as well as roofs). They give solutions whereby they will evaluate issues with existing establishments as well as additionally aid with structural design and computations for changes. They can additionally supply solutions in regard to the design of brand-new premises as well as planning permission applications.