Find a Surveyor you can trust in Oban.

Basically, a chartered surveyor is a building surveyor who inspects a property for faults or defects as well as future issues or problems. They’re also able to work out the value of a property and also prepare a report in order to help you determine whether or not the property is a good investment or if there are any issues that may create problems later in the future such as damp, structural issues and the likes. In order to become chartered surveyor, a surveyor will need to undergo additional qualifications and possess a specific level of experience which is RICS (Royal Institution of Chartered Surveyors) approved. It’s possible that some surveyors may not have pass through these additional levels to become chartered, however it’ll still be regulated by RICS and be fully qualified. These can be termed as Assoc RICS, associates or building surveyors. While you don’t necessarily have to use a chartered surveyor for your survey, it’s highly advisable to use RICS approved experts.

Just like any other building surveyor, chartered surveyors work by visiting the property, assessing various areas while also determining any defects on site. Once done, they’ll then state all findings in a report for you to help you make the best possible informed decision, whether or not you’ll want to go ahead with the purchase or re-negotiate the terms of the purchase based on the findings in the report. 

You’ll need to hire the services of a chartered surveyor after you’ve made an initial offer on the property and it has been accepted. Most offers are made “subject to survey”, in order words, the seller is well aware that if the survey reveals something unexpected, you can decide to back of the agreement or request a reduction in price.

Common reasons you may need a structural engineering inspection are

1. Bowing/cracked foundation
2. Settlement or wall cracks
3. To remove a wall in a remodel
4. Add solar panels to a roof
5. Add a second story to a home

If you’re thinking about hiring the services of a quantity surveyor for your next building project, then you might probably want to know how much its going to cost to enable you set a budget and start to plan. However, there’s no single and straightforward answer to this question as the price of a survey is dependent on a wide array of factors. The primary drivers include the scope of the construction, the complexity of the property, the level of skill required to make appropriate assessment of the property as well as the level of liability that will be covered by the quantity surveyor. In a more simpler terms, the cost of a quantity surveyor is determined by the size, age, condition, complexity and to some extent agreed purchase price.

Generally, most quantity surveyors are charged out at a rate of £100 per hour. And as a result, the price of a quantity survey is related to the number of hours that’s going to take to make an in depth assessment of the property. Typically, several quantity surveys will take up to half a day on site with a further half going to the production of the survey report. Consequently, it would be totally fair to say that a quantity survey would cost you anywhere within the range of £600 to £800 plus VAT. For a less detailed and simpler survey such as RICS Homebuyers Report and Valuation, you can expect to use only a couple of hours on site which will also be topped by a few hours of work in the report production. As a result, the normal cost of a Homebuyer survey would be between the range of £400 to £500 plus VAT. However, you should take note that the prices can vary on a geographical basis.

The main distinction between a Building Survey and HomeBuyer Report is that the survey is a great deal extra thorough, and offers you a highly comprehensive testimonial on the condition of your home.

Both major types of property survey from RICS are the Building Survey as well as the HomeBuyer Report. Although it is down to you, as the owner or buyer, to pick which survey is the right one for your requirements, there are some guidelines in place to aid you determine.

A HomeBuyer Report is generally far better for properties that:

• were built within the last 100 years
• are of even more conventional style
• are constructed from typical building materials
• are in a practical problem, as far as you can inform

A Building Survey is generally much better for residential or commercial properties that:

• are much older and developed greater than 100 years ago
• have gone through significant expansion or change
• are a lot bigger as well as supply considerable holiday accommodation
• you plan to change in the future
• are of non-traditional fabrication.

A Structural Engineer is quite likely to be a participant of the ICE (Institution of Civil Engineers) or a registered member of IStructE (Institution of Structural Engineers) and also will probably have after his or her name the letters MIStructE, FIStructE, MICE or FICE. Structural Engineers with these letters after their names are referred to as Chartered Engineers.

It is usually encouraged that you involve the services of a Chartered Engineer as opposed to an Engineer that is not chartered but it should be noted that there are some Engineers with significant experience who are not chartered. The choice is yours.

If you wish to work as a quantity surveyor or perhaps you’re just looking to hire one, then one of the first things that comes to mind is the qualifications to look out for. To work as a quantity surveyor, you’ll normally require a degree in quantity surveying or commercial management which is accredited by the RICS (Royal Institution of Chartered Surveyors). However, in the event whereby your degree as an undergraduate happens to be in a different subject, there’s still a chance for you to become a qualified quantity surveyor. To achieve this, all you need do is to take a Royal Institution of Chartered Surveyors accredited post graduate conversion course. Degrees that this applies to includes the following: Economics, building or construction, geography, civil or structural engineering, mathematics, project management ( construction) as well as urban and land studies.

Typically, the post graduate course will take about a year to complete ( on a full time basis), whereas it takes about 2 years on a part time basis. What’s more? There are some employers that will recruit some graduates as “non-cognates ( meaning those with a non RICS accredited degrees ) and support them financially through the accredited post graduate course. Furthermore, you can as well take a RICS accredited degree apprenticeship whether undergraduate, PGDip or Masters, in quantity surveying as well as project management that combines work with part time study at a university.

However, if you’re without a degree, there’s still an option. Simply start work as a technical surveyor ( also referred to as surveying technician ) and then apply for a part time study while working to qualify as a quantity surveyor.

.Typically, quantity surveying involves the calculating and management of the costs relating to projects, starting with assisting with the initial estimates to finalizing the overall requirements of the budget. Quantity surveyors normally work in land management, property as well as construction industries. Generally, quantity surveyors are usually engaged at the start of a project, consulted and brought in to take a look at a planned construction’s feasibility or repair needs, they then subsequently supervise the remaining activities during the capital expenditure phases of the project development. In other words, they’re often involved on the site up until the completion of the construction project helping to monitor both the forecasted and actual expenses while also being required to quickly determine the best line of action to take to deal with problems  as well as changes in specifications with updated costings and feasibility reviews.

As a quantity surveyor, you’ll be required to perform a series of roles on a daily basis. This may involved having to work in an office in one day and the next, you’d probably find yourself on a construction site meeting with clients or consulting with a construction personnel. Each project is unique as there’s always a great deal of variety which can be not the most pleasant activity especially for someone who doesn’t like routine works. On a daily basis, quantity surveying normally involves preparing tender and contract documents, carrying out analysis, monitoring costs variation and preparing reports, determining the client’s requirements and taking on feasibility studies, distributing work to sub contractors as well as making the necessary payments. Apart from all the aforementioned, site visits also represents a big part of quantity surveying as you’re required to make assessments on the financial projections for the future activities.