Find a Shop Fitter you can trust in Warwickshire.

• Where you live
• How big you want your driveway to be
• What colour or design you would like
• Whether any additional work will need to be completed to prepare the area for the driveway

The floor heating system possesses a flat ribbon located underneath which be installed directly underneath wooden floors without the need for any additional subfloor preparation. It happens to be one of the few systems that can function as a primary heat without the need for screeds. If you’re interested in learning how to fit underfloor heating under wooden floor, then you’ve come to the right place! In this step by step guide, we’re going to take you through the process and providing you with all the necessary details at each step of the way. Let’s take a look!

To get started, you’ll only require a little preparation and this involves making sure that the surface area is dust and debris free. Once done, you’re ready to go.

1. Spread your 6mm therm-all insulation and make sure it covers the entire floor.
2. Put the ribbon underfloor heating mats on the insulation
3. Use the double sided tape on the under floor heating mats to attach them to the insulation
4. Make use of high adhesive take where needed to make sure the heating mats are secured.
5. Route the cold leads ( live and neutral ) to a junction box right above the skirting board level.
6. Examine whether or not the resistance level of the heating elements matches with the resistance chart in the installation manual
7. Link the cold leads with a 5 lever quick connectors
8. Install the wooden floor directly over the top of the heating mats
9. Due to the dangers involved while working with electricity, it’s advisable to call in a reliable and professional electrician to help with the setting up of the electrics.

With heating and cooling bills making up more than 50 percent of one’s overall utility expenses as reported by the Department of Energy, you’d probably want to know some ways in which in you can improve the efficiency of your air conditioning system. With the warmer months just around the corner, now is the best time to get started. Not only will you be able to improve the air conditioning efficiency in your home, but you’d also be able to save some money on cooling and heating bills. In this article, we’re going to consider the top 5 tips you can implement to get your air conditioning system running efficiently and at its maximum. Let’s take a look!

• Ensure that around your outdoor condenser unit is clean. When clean and free of debris, your outdoor unit is able to function at its best. This can be done by yourself just by watching a couple of videos, however you’ll need a professional whenever a more thorough and in depth cleaning required.
• Vacuum indoor vents and keep vents unblocked. In order to ensure there’s an uninterrupted airflow from your system, there’s a need to vacuum dust as well as form of debris away from the indoor vents. You should also keep items such as furniture and blinds away from obstructing the vents.
• Increase your thermostat by a number of degrees. Generally, adjusting temperature 5 to 8 degrees can go a long way to help you save some money.
• Keep lamps and other heat producing appliances away from the thermostat. Having heat producing appliance will only inform the thermostat that the air in the room needs extra cooling. This will make the system run longer and use up more electricity.
• Keep the curtains and blinds closed. This is to prevent the heat of the outside coming in and vice versa.

With the title of this blog, do not be deceived into thinking the purpose is to encourage you to install an external insulation by yourself. Even as a competent DIYer, it’s not advisable to buy a couple of materials and start slapping it into the wall hoping for the best outcome. External insulation is by no means a DIY job and without the proper training and experience, it can easily turn out disastrous resulting in loss of time, effort and money in such a valuable project. This blog, however, will give you a great insight on how the installation process works and help maximize knowledge ensuring you do not spend more than necessary.

External Insulation Installation

lRender Test

• This is done to ensure the existing render is good enough for insulation support.

• If positive, the insulation can be applied directly onto it.

• If negative, ensure removal of the old render before fitting the insulation.

lPipework Adjustment & Removal

• Remove all pipework prior to insulation fitting

• Install temporary downpipes to ensure water is not wasted and everything continue to function normally during the insulation fitting process.

lWindow Protection

• Protect the window with a protective layer or film.

lStarter Track Fitting

• Determine level you want the insulation to start (height).

• Fit the aluminium start track or carrier tray at the identified level.

lInsulation Boards Fitting

• Apply a layer of adhesive to the board and glue them to the wall in a staggered pattern.

• Cut to fit round all obstructions and windows.

• File off the edge of the board where necessary using a rasp upon successful fitting of the boards

lMechanical Fixing Inclusion

• Hammer around 10 fixings per square metre into the board.

• This is to secure the insulation boards.

lBeading Fitting

• Add corner beads and stop beads to ensure the insulation is secure and to prevent it from making contact with other materials.

lReinforcing Mesh & Render Addition

• Apply two layers of strengthening properties and between the two layers of render, include a fibre glass mesh.

lPrimer Application

• Paint on the primer

lFinal Render Application

• Choose your most preferred texture and colour as this will be the last coating of the installation process.

lPipework Re-installation

• Re-install all detached pipework at the start of the installation process.

What is your garage being used for? If your answer is anything besides your vehicle, you’re in the majority in the UK. In the country, according to a research by Admiralty Loans, several home and property owners now use their garage as dumping ground for all sorts of stuffs asides a car. Ultimately, this gives rise to garage conversions as the more or less underutilized space can be converted into a living space which can be more beneficial while also adding more value to the property.

A garage conversion is a fast and relatively affordable route to adding more floor space within your home. It’s basically the act of changing your garage into something other than a storage or a place in which you can park your car. This can be anything from a bedroom to a playroom and anything in between. It’s a great way to provide extra space to allow your family to spread out and have more privacy while still within the walls of your home.

A garage conversion project is a huge one which mostly does not require a planning application so far the conversion is internal. However if you’re planning to increase the garage’s size or change the exterior of your home, or convert your garage into a separate room, then you may require a planning permission before getting started. It’s always wise to consult your local authority before carrying out any work to be on the safer side.

A project of garage conversion’s magnitude is better left to a reliable professional who have the experience when it comes to dealing with building regulations and more. This way, you’d also get to save yourself some headaches and some extra cash which may result from possible costly errors.

If you’re decorating a room from scratch, then you’d probably need some help especially if its your first time. Bedroom decoration is not as easy as it seems, and you’d definitely need to put a lot more things into consideration when compared to other rooms that are less used in your home. Your bedroom should be decorated in such a way to enable a calm and relaxing atmosphere which is conducive enough to guarantee a peaceful night rest. In order to help you achieve this goal and ensure all necessary areas are touched, we’ve put together this guide which covers the essential aspects of bedroom decoration. Let’s take a look!

• Colour. The wall colour of your bedroom speaks volume about the overall appearance of your room. This aspect is,however, often overlooked but its importance can not be overemphasized. Light blue is always a great choice as it can help induce sleep. However, you can also go for colours like red or royal blue if you feel daring but you must have a lot of natural light entering your bedroom for this to work. The best colours, however, are whites and blues.
• Light. This is another important consideration. It’s essential to make sure your room is properly illuminated when its dark out and the best option is usually a centrally placed ceiling light.
• Bed. The bed should work hand in hand with the wall colour and lighting of your room. Once the wall colours and lighting is in place, then you can start looking at beds that would perfectly suit your vision.
• Storage. Bedroom are not only meant for sleeping, as you’ll also need a storage for keeping clothing and personal items organized.
• Decor. This involves decorating your room to reflect your personal taste and style. You can consider a rug, wall art, mirror, candles and even books.

First and foremost, it must be stated that replacing an existing electric shower is much easier than fitting one from new. This is primarily due to the fact that the main components required which includes the water pipes as well as electrical connections will have already been established. In this post, we’re going to assume that all these are already in place which means you’re replacing an existing electric shower with a new one. It’ll also be an advantage if the preferred electric shower features cable and pipe entry points at the top and bottom as well as the rear and side so as to allow for more flexibility when it gets to routing cables and pipes. If you’re not confident enough to pull off this task, then it’s strong advisable to call in a professional who can guarantee the best results the first time. Here are the steps you can follow to fit your electric shower:

• Disconnect the power supply as you probably know water and electricity aren’t particularly the best of friends. Once done, you’ll also need to turn off the water supply
• Remove the shower unit. Many shower units are secured with four screws which makes the removal rather straightforward.
• Examine the shower connection points to determine if they’re in the same place on the new unit as they were on the old one.
• Install the new shower unit. First, you’ll have to mark the position of the new units on the wall using a pencil. If the new units don’t possess the same silhouette as the old one, you’ll have to drill new ones preferably using a masonry drill bit.
• Check your installation at both the electrical and water supply to ensure the connection is made correctly.
• Test your new electric shower by turning the power and water supplies back on.

The roof is the place that your conservatory is most likely to get grubby, but cleaning it is easy. You shouldn’t need to use any powerful cleaners – just warm water and a mild detergent.

The best tool to use to access your conservatory roof is a telescopic brush. This will help you get into corners and high areas without needing to work from height. You can use a ladder to help you clean your conservatory roof, but you should be very careful to avoid leaning it against any glazing

.

Consider investing in a telescopic cleaner with squeegee, brush and mop attachments to help you achieve a great finish on your aluminium conservatory.