Find a Shop Fitter you can trust in Stafford.

If you’re considering adding a two storey house extension, then setting a budget for this project would be a great way to get started. Similar to a rear extension, a two storey extension usually leaves the rest of the building needing some work and, due to its size, this may imply the re-development of the entire house - which is why they can be very costly. Some of the other influencing factors that can have big impact on a two storey house extension cost includes: your location, the size of the build, complexity of the design ( anything beyond the standard build will normally require more expertise and time), the glazing to be incorporated ( the more the glass used in the project, the more the material cost), as well as the team used.

Generally, when it comes to extensions, the major part of the expenses will be made on the build of the project. This is because it doesn’t only cover the material cost but also the contractor’s overhead as well as the daily rates. At this stage, the extension prices can be determined by the standard of the work that’s being done.

For a fairly average room size of about 18 square metre, the two storey extension should cost within the range of £2,500 to £3,000 per square metre - with the range being determined by the finishes incorporated. Therefore, a two storey extension of about 18 square metre should cost within the range of £45,000 to £55,000. However, this is with the assumption that there are standard window sizes, bathroom suits are modest, and without any need for any purpose joinery or glazing. If you wish to include all these extra features you’ll also have to pay more to make the total cost between £70,000 to £80,000.

Apart from the cost of hiring a skip, the area in which to place the large item is another major concern for individuals looking to hire a skip. So if you’re wondering whether you can place your hired skip on the road, there are four legal requirements that applies and must be complied with for your protection in the situation whereby a third party accident takes place. Deciding to overlook these conditions can lead to a fine or forceful removal of the skip by the local council.

Here are the compulsory legal requirements that must be fully complied with:

• Get A Permit

The local council gives out a permit for skips to be placed on the road. This permit must be acquired and the cost may vary depending on the local council in your area.

• Illuminate The Skip

Since the skip is to be placed on the road, then it’ll only make sense to have it illuminated at night or in low lighting situations for safety of all road users. According to the law, lights must be positioned at each end of the skip to be easily spotted.

• Use Cones

According to the law, a minimum of two (2) cones must be placed on the skip’s approach side for the protection of all road users.

• Comply With The Skip Requirements

You can’t place just any skip you like on the road. By the law, there are certain conditions that must be met by the skip itself before placement. It must be painted with the yellow colour on the sides, have both the owner’s name and phone number clearly written on it and must also possess a BS AU152:1970 complying red and yellow fluorescent reflective marking which is compulsory to be acquired within two (2) working days upon filling.

Click here to learn more about skips.

It depends on the style and size of the conversion, but in general, a loft conversion will take between 1-2 months. A loft conversion is a substantial building project, and plans will need to be drawn up. This may add to the time it takes to complete your loft conversion.

You can find out roughly how old your wiring is by simply looking at it. If the wiring around your fuse box is covered in old-fashioned casing, or is damaged or fraid, it may be over 25 years old and need replacing. This is more common in older properties or houses that have been empty for long periods of time.

Yes, although pest control products available to the public are usually only suitable for dealing with very small pest infestations. If you have a nest or persistent pests, it’s best to contact a pest control professional. They have access to more suitable products.

Garden slabs are a joy to behold but only when done the right way. Well, the installation of paving slabs shouldn’t be exceed digging a little here and there, buying a small amount of mortar and pressing down the garden slab, right? Absolutely not! But we must admit how great it would have been if only it were that easy in real life. Let’s be honest, in reality, laying garden slabs does not only require you to prepare your sub-base painstakingly and mix your mortar using the appropriate materials, but you’d also have to work with accurate and precise paver placements to guarantee the patio’s longevity. Consequently, this happens to be a stressful and quite tricky challenge. If you lack the required confidence to pull this off, we’d recommend you hire the services of a seasoned professional who can guarantee the best results and also save you time and extra cash that may result from possible costly errors. In this guide, you’d gain more insight into the garden slabs laying process.

To get started, you’ll need sharp sand, cement, shovel, wheelbarrow, pointing trowel, rubber mallet, spirit level, jointing compound, hard-bristled brush and tarpaulin.

1. Mix a layer of mortar for each paver.
2. Apply the mixed mortar onto the sub base by using the trowel.
3. Slot the first flag in place and ensure not to stain the paver’s surface with the mixed mortar.
4. Using a rubber mallet, carefully tap the paver to the mortar bed. Once done, ensure the surface is even with a spirit level.
5. Take a measurement of the gap between the pavers
6. Repeat the above steps until all pavers have been perfectly laid
7. Leave the pavers to dry for about 1 to 2 days. You can protect it using a tarpaulin if concerned about rain.
8. Use the jointing compound to fill up the paver gaps to bind together the pavers. Ensure to wipe off any excess compound using the hard-bristled brush.

The vinyl material is a very popular flooring material preferred by several home and property owners as it happens to be slip resistant, easy to clean and also waterproof. As a result, this type of flooring is perfect in bathroom, kitchen and other high traffic areas within a home or property. Now, most home owners wonder whether or not it’s possible to use underfloor heating under vinyl floor. If you’re also looking for answers, then you’ve come to the right place! In this post, we’re going to consider the possibility of fitting underfloor heating under vinyl flooring.

The short and simple answer to this question is yes, you can safely use underfloor heating under vinyl flooring. A bunch of studies has been carried out by flooring experts to get a better insight on the effect of underfloor heating on vinyl floor’s physical and aesthetic appeal. It has been made known that there’s no shrinkage whatsoever or any form of impact on the physical appearance like discolouration and more. As a result, underfloor heating has no impact on vinyl flooring.

In order to ensure a perfect heat output, there’s the need to obtain a heat loss calculation when selecting a heating system. It’s always advisable to get an Energy Star approved programmable thermostat which offers you a full control of your property’s heating settings. It also enable you to live in a warm room when you want to without having to waste heat energy.

Generally, all wet underfloor heating systems are fitted on the structural sub floor. This implies that all products within thee wet system range can be incorporated safely with vinyl flooring.

Carpenters are involved with numerous diverse kinds of construction, from home improvement to cabinet making, and framing to large construction projects.

Since the start of time, men have utilised hand tools to make things. You need to understand the correct usage of a hand saw, hammer, plane, screwdriver, and other manual tools. These tools are used to attach ready pieces and produce a complete product, such as nails, screws, and dowels (pre-formed fragments of wood that fit into pre-drilled holes), which are then fastened and amassed.

Carpenters must be adept with the safety and proper usage of numerous power tools, including the ones that do the cutting, shaping, and refining of the wood. This permits constituents to take the arrangement desired for a specific project. Some of these tools include large table saws and drills, band saws and sanders. Apart from power tools, there are also tons of power hand tools including saws and hand drills that can help with the smaller details of any project.

Cabinetry and Furniture Making

Being a cabinet fabricator or furniture maker gives you the chance to build purposeful devices for a home. You need to be able to plan cabinets, chairs, tables, and other products, frequently to fit into a provided space. It is up to you to pick the proper material such as wood, metal, or fabric, and then make the decision about the type of stain or paint, and also the necessary hardware needed to attach the cabinets and complete the furniture.

Residential Carpentry

Looking to become a residential carpenter? Your primary work would be on home improvement and other repair projects; indoors and outdoors. Residential carpenters complete setting up projects on wood flooring, outdoor decks, and patios. This job requires you to design your projects and then work on those designs. You also have to be skilful at work with your client base of proprietors, who you have to satisfy both aesthetically and financially, by keeping costs in check.