Find a Shop Fitter you can trust in Rugeley.

As an environmentally conscious homeowner, it’s very likely you would have heard of a wood pellet boiler or maybe even considering fitting one in your home or property. So if you’ve heard about wood pellet boilers, you’d probably want to know about it especially how it works. In this article, we’re going to walk you through the wood pellet boilers operating process. Let’s take a look!

✓ Typically, wood pellet boilers possess 4 major components, these includes a burner ( which ignites or burns the pellets), a hopper ( which stores unused pellets), a conveyor ( which works to carry the pellets from the hopper to the burner where its ignited) and lastly, a controller ( which responds automatically to your thermostat and appliances’ demands).

✓ In the event whereby your thermostat demands heat or if you happen to switch on a hot water tap or appliance, pellets will be automatically fed into the burner which in turn ignites it and set the firing rate to match the needed heating load.

✓ In a situation whereby more pellets is needed by your boiler, the vacuum or augur system will act by pulling pellets from your bulk pellet storage bin and automatically refill itself.

✓ The wood pellet boiler will clean the burn pot and heat exchanger areas ( moving ash into the ash bin), during and after the burn cycles. The ash bin will be emptied once for every 2 to 3 ton of pellet that’s ignited.

Other facts about wood pellet boilers

✓ The wood pellet boiler can be directly linked to existing plumbing and heating system, regardless of whether or not there’s an existing heating oil boiler remaining.

✓ Wood pellets can be stored in bulk in a storage bin outside your home as the bins are generally weather resistant and also very durable.

In this day and age, not having an air conditioning system installed in your home will be quite odd and strange. And even more interestingly, air conditioning systems happens to be a necessity at the present time rather than a luxury. However, there are still several people who’ll forgo the option of installing a good air conditioning system in their homes due to the fact that it’s nothing but an extra cost they just don’t wish to incur.

In truth, the cost of purchasing, installing and running an air conditioning system can actually be a turn off to several homeowners, but the numerous benefits you will enjoy by having it installed largely outweighs any drawbacks the system might have. Now let’s consider the benefits associated with AC systems.

✓ It minimizes the risk of dying. Thousands of people die every year across the globe due to the constantly deteriorating temperatures. According to the experts, too much heat can lead to heat strokes and a great way to prevent this from happening is to invest in air conditioning systems.

✓ It improve the quality of sleep. A good quality sleep simply can’t be overstated as it leaves you feeling fresh and revitalized. However, this can be greatly hindered when everything around you is hot. For a good quality sleep, you might want to invest in air conditioning systems as they happen to be best way to have your home feeling cool and super comfortable.

✓ It prevents your devices from overheating. Electrical appliances can also suffer terribly under great heat and are vulnerable to overheating. In fact, devices such as microwaves, PCs, mobile phones and more can get damaged due to heat. The cost of replacing all these appliances will definitely be greater than the cost of installing an air conditioning system.

If you’re considering rendering your house or property, then you’d most likely want to know whether or not applying for a planning permission will be needed. In several cases, planning permission will not be required for the maintenance, repair as well as replacement of the existing render on your building. These activities are covered by what’s called “Permitted Development Rights, which allows you to carry out some activities without having to apply for a planning permission but always subject to following some strict guidelines. For rendering, as long as the material (render) possesses an identical appearance to those existing on the house as well as same colour, then you will not require a planning permission. However, there are a number of projects that have been highlighted in which a planning permission would be required. These includes the following:

✓ Re-rendering in a colour that different from the original one used on the house or building.

✓ Rendering over brickwork which was not originally covered.

✓ Rendering over pebbledash

✓ Removing pebbledash and replacing it with render.

Another exception to the Permitted Development rights are for houses in conservation areas, national parks or areas of outstanding national beauty.

Although, you wouldn’t normally require to submit a planning application for approval before you apply render, but in truth it’s actually a bit of a grey area which isn’t totally clear and doesn’t allow for much freedom or creativity. And due to this fact, homeowners who wants an absolute peace of mind may opt to apply for planning permission just in case. It’s also worth noting that whether or not a planning permission is required, a huge rendering work will need to comply with building regulations which includes the need to insulate walls on the inside or outside as part of the work on several older properties .

So you’ve decided to add some new French doors for your home? If yes, then you’re likely going to be concerned about whether or not you’ll require a planning permission to get started.

Properties are compelled to meet certain requirements and have proper permission in place in order to be in line with the regulations. Overall, you’re going to need planning permission in the following situations:

• If you want to construct something new.

• If you want to a make a major change to a building like an extension.

• If you want to change the use of your building such as converting it from residential to commercial.

Getting a new door or replacing an existing one doesn’t usually require a planning permission as it’s one of the less complicated improvements you can make to a home. As a result, this kind of improvement is normally covered by permitted development rights especially when you’re not constructing an extension for which to use the French door. However in the events whereby a permission is needed, it will most likely going to be granted if the proposed changes does not have an impact on the primary elevations of the house which is usually the front of the building.

It’s also important to note that permitted development can be limited by local authorities. These limitations include buildings in a conservation area, listed buildings, and if you happen to reside in an area of immense aesthetic appeal or other designated areas like National Parks. If such situation before you change your French doors, it’s important to consult your local authority before proceeding.

Solar energy comes from the sun. Solar panels absorb sunlight, and convert it into electricity. This can be used to power heating systems, lighting and appliances. You can also get solar thermal systems, which use solar energy to warm hot water.

Solar energy is a type of renewable energy, because sunlight is considered to be in unlimited supply.

Two of the commonly used terms in the UK and Irish construction industry is “First Fix and “Second Fix First fix encompasses all the work required to take a building from foundation to stroking plaster on the interior walls. This comprises of building walls, floors and ceilings, and implanting cables for electrical supply and pipes for water supply.

Some claim that First Fix starts after the shell of the building is complete, and ends when the walls are plastered. Some of the elements in the first fix are as follows.

• Drain runs: must be downhill and straight

• Spare conduits: drawstrings

• Soil pipes

• Copper pipes

• Normal pipes

• Doorbell

• Door frames

• Pocket doorframes

• Stairwell

• MVHR (mechanical heat recovery ventilation runs)

• Push-fit or other plastic piping

• Electrical back boxes

• Electricity cable runs

• Telephone, data and audio-visual cables

• Socket location

• Security

• Fire alarm

• Sound insulation

• Plasterboarding

It is to be kept in mind that the list goes on as there are several things that you can do when you are building a house from scratch and it is impossible to cover each and every aspect in detail.

The second fix includes all the work after the plastering of a complete house. These include linking cables to the electrical fittings, coupling pipes to the baths and sinks and fitting doors into doorframes. Second fix work requires a tidier finish than the first fix.

Carpenters, electricians and plumbers get a proper idea on the division of work. They will also be able to visit the construction site at different times.

Project managers can simply report it as the "first fix complete" or "the second fix 50% done" and others would very easily understand.

Regardless of the fact that a construction company might specialise in a certain form of fix, be it the first or the second, they are obligated to have a rudimentary understanding of both and are required to perform them from time to time.

How Much Is A Conservatory?

If you’re looking to install a conservatory in your home or property, one of the first things you’d have to consider is the cost of getting it done so you can set a budget and start planning. In this article, we’ll give you an idea of how much a conservatory price is, so you can have a rough estimate for your unique conservatory requirements.

Generally, the average cost of conservatory can be within the range of £5000 to £20000 and of course this depends on both the design and home. There are a number of influencing factors that can play a key role when it comes to determining how much you’ll be paying for your conservatory. Some of these factors include the size, style, material, colour as well as the roof type. All of these factors can greatly determine the overall price of your conservatory, so you’d most likely have to approach the acquisition process as a multi-staged concept so as to get the perfect fit for your home in every level.

So with these factors in mind, a lean to conservatory style with a polycarbonate roof material will range between £8100 to £11900. A Victorian conservatory with a polycarbonate roof material will range between £9600 to £14200. While their Edwardian and Gable counterparts will also cost within a range of £9600 to £14200 for either style.

A lean to conservatory style with a glass roof material will range between £9000 to £13200. A Victorian conservatory with a polycarbonate roof material will range between £11000 to £16200. While their Edwardian and Gable counterparts will also cost within a range of £11000 to £16200 for either style.

How Much Is A Metal Front Door?

If you’re looking to get a front door, one of the things you’d want to consider before you proceed is the price of getting the door. As an exterior door, you’ll need something that’s close against weather as well as intrusion. And that’s exactly where steel comes in! It’s a popular choice for exterior door material due to the numerous qualities it possesses. However, the single and precise cost to get a metal front door can not be provided as it depends on a wide array of factors.

The cost to install an average metal front door will depend on the material and finish grade, structural preparation, size, unique needs, labour rate and lots more. Other things you’d have to put into consideration includes the following:

✓ A project to replace more than 2 doors are more likely to enjoy a unit price or bulk discount.

✓ During inspection to replace the existing door with a metal one, there may be some repair concerns like rot and also a need to adapt the existing door opening structure which will also tell on the price

✓ There may be local or national subsidy for energy efficiency improvements.

✓ Taxes and permit fees may also be applicable.

✓ DIY considerations. This project may be suitable for a DIYer with carpentry skills. So if you wish to carry out the installation by yourself that’ll also help you save some money.

Generally, the cost of a metal front door will range between £100 to about £10,000. However, before you purchase a steel door it’s very important to put into consideration what the door is being used for as well as what you’d prioritize between beauty and security - although, most steel doors can offer both at an affordable price.