Find a Shop Fitter you can trust in Rotherham.

If you’re thinking about hiring the services of a quantity surveyor for your next building project, then you might probably want to know how much its going to cost to enable you set a budget and start to plan. However, there’s no single and straightforward answer to this question as the price of a survey is dependent on a wide array of factors. The primary drivers include the scope of the construction, the complexity of the property, the level of skill required to make appropriate assessment of the property as well as the level of liability that will be covered by the quantity surveyor. In a more simpler terms, the cost of a quantity surveyor is determined by the size, age, condition, complexity and to some extent agreed purchase price.

Generally, most quantity surveyors are charged out at a rate of £100 per hour. And as a result, the price of a quantity survey is related to the number of hours that’s going to take to make an in depth assessment of the property. Typically, several quantity surveys will take up to half a day on site with a further half going to the production of the survey report. Consequently, it would be totally fair to say that a quantity survey would cost you anywhere within the range of £600 to £800 plus VAT. For a less detailed and simpler survey such as RICS Homebuyers Report and Valuation, you can expect to use only a couple of hours on site which will also be topped by a few hours of work in the report production. As a result, the normal cost of a Homebuyer survey would be between the range of £400 to £500 plus VAT. However, you should take note that the prices can vary on a geographical basis.

How To Plaster A Wall

In order to plaster your wall successfully, you’ll firstly need to get the appropriate tools and materials for the job in place. The tools you’ll need to have includes a trowel and bucket trowel, plasterer’s float, corner trowel, hawk board, two buckets, mixing stick or a paddle, adequate plaster, PVA , dust sheets, clean water, sandpaper, stilts or step ladder as well as a dust mask.

✓ Prepare the wall. You’d have to make sure that you lay down a dust sheet so as to protect your floor and also gather any possible spillage or debris of plaster, before you start working on the walls. Get rid of all the dirt, dust and debris as this is very important for the success of your project if you’re going to be plastering on a worn out and old wall. Also, cover the holes and cracks in the walls with a screen tape

✓ Apply PVA to the wall. This will help ensure the layer you’re using will not dry out at the same time.

✓ Mix the paster. Mix the plaster according to the instructions given in the manufacturer’s manual.

✓ Apply the plaster onto the wall. Upon cleaning of the walls and successful mixture of the plaster, the next step is to apply the mixture to the wall using the hawk board, trowels and a floating tool.

✓ Skim and smooth. After the the first coat has dried after waiting for about 30 minutes, the next step will be to wipe out the bumps and lumps using a trowel to smooth over the surface. Once this is done you can then scrape the wall with a devilling float.

✓ Apply the second coat of plaster

✓ Apply the finishing touches. This includes polishing your work by adding some water to the surface with a spray gun and using the trowel to further smoothen out the surface.

✓ Painting and wallpapering.

Have you being considering the options available to you for removing the conifers around your home? Or perhaps you’re just planning to raise some structures in an area where you have lots of conifer trees. Regardless of your reason for wanting to remove a conifer tree, you’ve come to the right place!

There are multiple options to remove a conifer tree based on the one that best suits your needs. Some individuals are okay with felling the tree and leaving the stumps behind, while others don’t just want both the tree and the stumps so they poison the tree and subject the stumps to a quick rotting process.

lThe Physical Method

This basically involves felling the trees with the help of powerful machines and other tools. Let’s take a look!

• Early preparation. Get your chainsaw ready alongside your pruning tools as well as other equipments that can prove to be useful.

• Determine the direction you want the tree to fall. You must ensure there’s no passerby risk or risk of damage to any property whatsoever.

• Cut down the trunk. Put your chainsaw to use. First cut doen the branches and twigs before felling the tree.

• Choose your cutting technique depending on the tree’s size, slope and chainsaw available.

• Check for possible infestation before removing the conifer tree.

• Remove the conifer stumps by grinding the stumps out (use a grinder) and setting fire to consume the stumps.

lThe Chemical Method

To carry out this process, you need to first cut down the large tree branches using a chainsaw. Once done, cut off a portion around the circumference of the trunk below the lower branches, close to the root. Leave the bark’s strips connected to the conifer tree to expose the inner tissue.

Mix the chemicals and apply into the conifer tree directly until the whole surface is covered. This will make the conifer tree to die off gradually for a couple of weeks.

Gravel is the cheapest driveway surfacing material. Asphalt costs a little more than gravel, and concrete is significantly more expensive. The cost of paving depends on the material you use. Obtain as many quotes as possible as materials and costs differ from company to company.

Have you decided to improve your property instead of moving? The common problem most homeowners face after deciding to embark on a home extension project is not knowing where to start. In this article we’ll walk you through everything you need to consider and put in place before commencement of your home extension project.

• Is the extension worth it?

Before breaking the bank, you must be sure that the project will add good value to your home. In terms of “value, this is not only limited to the financial gain after disposal of the property, but also several other juicy benefits to be derived from extending your home like an extra living space for the household to spread out and more.

• Do you need a planning permission?

Check with your local authority to determine whether or not you’ll require to submit an application. You can also consult a building expert like an architect for advice.

• What are the building regulation?

Even though planning permission can be dodged, you can not avoid building regulations. These regulations are the set national minimum standards for construction and design which you must comply with to ensure the safety of the individuals in and around it.

• Who will design the extension?

You have to decided whether you’ll hire a professional architect to design the extension or not.

• Who will manage the building work?

If your home extension project is designed and built by a professional company, they’ll be responsible for the management. However, if you decide to use an architect or designed it yourself, you’ll have to hire a main contractor to manage the build.

• How to set the budget?

There are so many factors that can affect the cost of an extension, so it’s better to get the costs from your builder before proceeding.

• Do I need yo inform my home insurance firm?

Absolutely! This is very important as the new extension may affect the rebuilding cost of your property which could have an impact on the policy premium.

• Do I need to inform my neighbours?

It’s very important to discuss your plan with your neighbours before applying for a planning permission and communicate about the concerns they might have.

Whilst you may think conservatories are nearly all made from glass, this doesn’t have to be the case. If you live in a built-up area you could have a tiled rooftop to enable extra privacy, use obscure glass and even invest in blinds.Be aware that solid walls are possible but if the conservatory is manufactured with less than 50% of glass, you’ll need Buildings Regulations approval.

You can only repair blown double glazed windows in the sense that you can replace the sealed unit (the glass part of the window) instead of having to replace the entire window.

When a double glazed window is blown, it means that the seal around the window has failed and is now letting air in and out. Often the first sign that the sealed unit has blown is condensation on the inside of the window, which is annoying since there’s no way to get rid of it! When your sealed unit has blown, you’ll be losing heat out of the window, meaning you could be spending more on your energy bills.

As a temporary fix, you could see if you can buy a misting repair kit online, but the condensation will eventually occur again as the air gets in. The best thing to do is ask a window installer or glazier to replace the sealed unit for you.

It's simple to replace the glass in a window – the specialist will remove the beading around the window, remove the blown glass from your window frame and set it to one side. They will then clean up around the frame before adding spacers in, then fitting the new sealed unit into the frame. They’ll make sure it’s a snug fit before replacing the beading back around the window to secure it.

There's no reason to put off repairing a blown double glazed window since the cost is generally much less than replacing the entire thing. A sealed unit with installation costs an average of £100, whereas a completely new window will cost around £400. You’ll soon notice that it’s less draughty and will be able see out of your window once you’ve had the blown glass replaced.

There are a few reasons why commercial buildings often have flat roofs. Lots of people argue that flat roofs aren’t as attractive as pitched roofs, which is why it’s uncommon to see a residential property with an entirely flat roof. Lots of commercial buildings don’t need to look attractive, so go for flat roofs because they’re cheaper.

Flat roofs tend to be less expensive than pitched roofs, especially for large, broad commercial buildings. Some commercial buildings simply couldn’t have a pitched roof because their width would mean that the roof would have to be extremely high. Flat roofs are also cost-effective for commercial buildings because it means that air conditioning and ventilation units can go on the roof, saving space in and around the building.

Commercial buildings also often have flat roofs because they don’t need the loft space that residential properties need. If there’s no need for the space, it doesn’t make sense to spend more money on a pitched roof just to keep the attic space empty. Flat roofs also give the commercial building owner the opportunity to use the space as a smoking area for employees or give access to fire escapes to upper floors.

If you’re having a commercial property build, make sure you speak to the experts about the type of roof that is suitable for you. If you’re planning on having air conditioning or ventilation systems installed within the property, you might be best off with a flat roof – but if you need some extra storage space, a pitched roof might work best for you.