Find a Shop Fitter you can trust in Telford.

Being smart critters, a rodent infestation of a garden can cause the owner a lot of problems. Rats are pests bringing about a wide range of health hazards. They’ll camp in your compost, eat away your fruits and vegetables, gnaw through fences, containers and planters and even spread harmful diseases to humans. The wild rats can bite or even scratch when approached and will seek shelter anywhere possible like in your greenhouses, shed and even in your home. And worse still, they reproduce quickly as a female rat can give birth to six litters annually with up to 12 pups. Therefore, if left unattended to,an unwelcome visit can soon become an infestation in next to no time.

In order to get rid of rats, you can start by thinking like one. Like any other mammal, they need food, water and shelter to survive and thrive. Removing one or all these three things can effectively help you get rid of rats in your garden. Generally, there are several ways to get rid of rats which can be natural without the use of poison and artificial, with the use of poison.

If you wish to use the natural approach, you can try using peppermint oil or laying of traps. Rats are known to hate peppermint and it’s also alleged to mask their pheromone trails. Simply soak cotton wool balls in peppermint oil and position them strategically through out the garden. The second natural approach is more of a trial and error case as rats are always very suspicious and it’s possible your traps fail to catch any unless you’re very cunning with the placement.

The most effective method is, however, the use of poison to get rid of rats. Simply mix the poison with food in small quantities and place at strategic locations throughout your garden to get rid of the rats, However, this must be done with great care.

If you’re considering the installation of large format porcelain tiles in your home or property, you’d probably want to know how you can go about the laying process. Large porcelain tiles can measure up to 3m in length and as a result, requires specialist skills, equipment as well as products in order to see to a high quality installation of the tiles. In this guide, we share with you expert tips that’ll help install large porcelain tiles onto floor space with relative ease. Let’s take a look!

✓ Prepare the tiles. This includes cleaning the surface of the tile of any dirt, dust and removing any temporary protective layers. This is because any contamination to the tile’s surface can affect the suction action of the lifting frame.

✓ Cut your porcelain tiles. For cutting, the tiles should be transferred to a stable base for for more accuracy and clean cut. Use the measurements to get a perfect cut and if you’ll require a straight cut simply use the score and snap tools and techniques.

✓ Prepare the adhesive. Follow the manufacturer’s instructions to prepare the adhesive.

✓ Install the large porcelain tiles. Use a 4mm notched trowel to backcomb the adhesive onto the tile’s reverse. All ribs should run in same direction and also be parallel with the shortest length. Use a larger notched trowel to apply the adhesive to the substrate. Once you’ve applied the adhesive to both surfaces, you can then life the tiles into place with the lifting frame. Then use the tile levelers to ensure the tiles are flush at the joints and wipe off any excess adhesive

✓ Apply the grout.

Before the commencement of any project, it’s always best to get an estimation of the cost. However, determining the cost of an external solid wall insulation is not the easiest of tasks as it relies on varying components such as the insulation materials to be used, labour cost and installation as well as the type of decorative finish to be incorporated. And depending on your choice of insulation material, some may need some adhesives while others may require some fixings which also contributes to the differences in price. As a result, the determination of the material cost alone can be tricky and even more so when various materials cover varying areas.

With that in mind, the cost of external solid wall insulation generally ranges between £80 to £100 per square metre2. As a result, a small flat can cost from £6000 to £9000 whereas a large detached house can have a price ranging between £21000 to £23000. To earn back your investment in terms of energy bill savings can take a couple of years, but it’s surely worth the try as there are several other benefits associated with installing an external solid wall insulation system. What’s more? Another huge factor that can influence the cost of your system is also the amount of work that’s required, how easy it is to be accessed by the installers and lots more

If you’re looking to cut down on the cost of your external solid wall insulation, then the best time for an installation might just be when you’re having another decorating or building project done such as fitting a new roof, window painting, installation of solar PV panels and more. This way, you’ll be able to spread the cost and have a greater value for each penny expended.

An electric range cooker should always be installed by a registered electrician. They will be aware of wiring regulations, what sockets are needed and make sure that your cooker is installed safely and correctly. make sure you book one before your new cooker id delivered!

There are a range of locks that are available for doors. Look for ones accredited by Secured by Design and British Standards. The quality of the installation will also affect the security of the door. Additional security measures such as a double lock, security bolts and chains can support this.

How Often To Service Boiler?

A boiler is a vital part of any home especially if you’re in the UK. Not only does provide your entire household with hot water and keep them warm but also adds a good value to your property. Boiler repairs and replacement are both super expensive and stressful, so in order to avoid all these worries, it’s better to have your boiler serviced on a regular basis for your own peace of mind. When you call in a reliable heating engineer, it can immensely raise your boiler’s efficiency while also saving you from more expensive issues down the road.

So if you haven’t had your boiler serviced for quite some time, moved into a new house and not aware the last time your boiler was serviced or perhaps you’re just wondering how often a boiler should be serviced, then you’ve come to the right place! The short and simple answer to this question is a boiler should should be serviced once in a year, and most preferably during the summer months. However, there are a wide range of factors that comes into play so it’s always advisable to check with your manufacturer before you proceed.

According to the law, you’re required to have your boiler services on an annual basis. Failure to do so can render your boiler or home warranty void. Therefore, it’s very crucial to take down the last time your boiler was serviced and also set a reminder to book your next appointment when the time closes in.

If you happen to own an electric boiler you may not need an annual servicing. But you may still be required to perform it annually by your insurance provider.

External wall insulation works to keep your home cosy and comfy while also helping to cut the energy bills. However with the great benefits also comes great costs, so it’s actually a logical decision to know whether there are grants out there which you’re eligible for to help you handle the cost of the external wall insulation.

There are grants available for external wall insulation, but rarely will you find one that covers the full installation cost. With the help of the government’s Energy Company Obligation (ECO) scheme, a couple of energy companies assist in making your home more energy efficient by offering grants or free insulation. In certain cases whereby you receive particular state benefits, you may as well qualify for a higher grant that’ll cover more of the insulation cost.

However, if your energy supplier doesn’t offer any grant, you need not worry as you can save as much on energy bill after installation. Here’s what insulation can help you save per year on energy bills:

• Floor insulation can help you save within a range of £30 to £75 each year.

• Cavity wall insulation can help you save about £85 to £280 a year.

• Loft Insulation (270mm) can help you save about £135 to £250 a year.

Generally, the amount you’ll be able to save on your energy bills depends mainly on the type and size of your property, as well as how energy efficient it already is without the insulation. In the long run, your external wall insulation will more than give you back your investment on the valuable project through your savings on energy bills. In other words, whether or not you’re eligible for a grant should never stop you from installing an external wall insulation.

The quick and simple answer to this question is yes, you can definitely spray paint your garage door - be it timber, metal, composite or upvc. However, the major concern of most home or property owners about a painted finish is whether it’ll become vulnerable to wear and tear or resist it. Will the paint easily peel off at the slightest provocation or will it stand up to abrasion? The questions goes on and on. The answer to the questions showing concerns about the longevity of a painted finish depends largely on the quality of the application.

For a successful and effective spray painting project, there’s the need to prepare the surface. There some materials that’ll require priming, be it a special primer or a thinned version of the paint. There are also some surfaces that’ll need some light sanding. Overall, the primary aim of preparation is to provide a clean and ideal surface for the paint to bond to. This is the most important factor that determines whether the finish is going to last or not.

Painting your garage door can either be done as a DIY task or you can probably hire the services of a professional. To paint the garage door yourself, you can’t buy the same equipment as a professional firm, but you can as well use a brush. This option will leave brush marks especially on metal and upvc garage doors which makes it not so appropriate if you want to have a smooth and even finish. Professional companies are highly recommended for this type of project as they possess the experience and knowledge and skills required to deliver a top quality job that’ll help obliterate all concerns you might have about its longevity.