Find a Shop Fitter you can trust in Whitby.

One of the big benefits of electric boilers is that they do not require annual servicing. There is no legal requirement for a yearly service and safety inspection as there is with gas boilers. Some installation companies do offer servicing packages included as part of the price.

Did you just purchase a double glazed window and confused about how to have it installed? Fitting the window yourself can be quite easy with the help of this step by step guide. However, if you lack proper training or experience, we’d recommend you reach out to a trustworthy professional who can guarantee the best results for help. That said, now let’s take a look at the process.

• Remove the old windows by detaching the old beading and glass window safely. Then make some interval cuts using a hand saw before using a crowbar to pry it out.

• Cut the external double glazed window seal. Once done, take a measurement of the window area’s width once empty. Then transfer the measurement to the window sil to face outside and cut using a handsaw.

• Seal the window sil. Add a bead of clear silicone along both inside lip as well as the centre to seal the sil.

• Screw the double glazed window to the sil. Position the window on the top of the lipped section that was siliconed. Then pre-drill them together and screw in three places. You should make sure the screws do not go totally to the sil’s bottom.

• Install the double glazed window. After successfully screwing the double glazed window to the sil, you can now fit in the double glazing. Make use of packers to make sure it’s even in the slot.

• Screw the uPVC window to the wall. If you’re happy and satisfied with the position of the window, you can then pre-drill through the frame of the window and the brick wall. Once done, simply screw it in place using masonry screws or Spax screw as they do not require crawl plugs in bricks.

• Seal around the window. To do this, simply fill any gaps with expanding foam, wipe out the excess and seal with silicone.

According to several studies and survey of ex-burglars, a home or building is less likely to be burgled with the availability of properly functioning and well fitted burglar alarm system. So if you’re thinking about installing one in your house, you can as well make sure you get the best possible burglar alarm that’s just right for your home. Several people asks the question of the best burglar alarm, but the fact is, it all depends on a number of factors such as your budget, personal preferences, your location, home features as well as the protection and response level you require. To put you in the right direction to make the best choice, here’s a breakdown of the types of burglar alarm systems to help you determine the one that will best suit your home.

lBells-Only Alarms

This makes a loud sound but that’s as far as it goes. It will not contact anyone.

Pros

• No monitoring contract and payment

• Easy to install

Cons

• It does not contact anyone.

• It may not deter the burglars if there’s no one around to stop the intrusion.

lDialler Burglar Alarms

This contacts your phone or any other numbers nominated once the alarm is triggered.

Pros

• No monitoring contract and payment.

• Nominated numbers would be dialled

• It can also notify you of other dangers such as fire if extra sensors are acquired.

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• Nominated numbers may be unavailable when dialled.

lSmart home security system

This contacts your or your loved ones whenever the alarm is triggered via a Smartphone or tablet application.

Pros

• Notifies you when away from home

• Can be monitored and controlled from a Smartphone

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• They can be expensive depending on your selected elements

lA monitoring contract

This implies paying a monthly or annual fee to a company to act or notify the police the your alarm is triggered

Pros

• The monitoring company is in hand to act in order to prevent the potential burglary and liable if it doesn’t.

• Some of the companies also offer maintenance services

Cons

• Expensive

• It cannot be installed by yourself

Click here to learn more about burglar alarms.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.

The short answer is yes, you can definitely have underfloor heating with wooden floor! Now you’re probably thinking wood and heat don’t mix right? Well, that’s true but here, there’s a way around it. The floor heating system possesses a flat ribbon located underneath which be installed directly underneath wooden floors without the need for any additional subfloor preparation. It happens to be one of the few systems that can function as a primary heat without the need for screeds. So, how do you go about it? In this post, we’re going to take you through the process of installing underfloor heating with wooden floors. Let’s take a look!

To get started, you’ll only require a little preparation and this involves making sure that the surface area is dust and debris free. Once done, you’re ready to go.

• Spread your 6mm therm-all insulation and make sure it covers the entire floor.
• Put the ribbon underfloor heating mats on the insulation
• Use the double sided tape on the under floor heating mats to attach them to the insulation
• Make use of high adhesive take where needed to make sure the heating mats are secured.
• Route the cold leads ( live and neutral ) to a junction box right above the skirting board level.
• Examine whether or not the resistance level of the heating elements matches with the resistance chart in the installation manual
• Link the cold leads with a 5 lever quick connectors
• Install the wooden floor directly over the top of the heating mats
• Due to the dangers involved while working with electricity, it’s advisable to call in a reliable and professional electrician to help with the setting up of the electrics.

When people think about heat pumps, they’ll automatically have the believe that a swimming pool will require a big heat pump. Since the swimming pool has a large volume of water, then warming such a volume will require a large ground source heat pump because that volume is much larger than the normal domestic hot water tank, right? Well, that point of reasoning does seem logical especially with the information almost everywhere that ground source heat pumps are usually less efficient when it comes to heating hot water for home’s use. However, the fact is there are also some things to put into consideration that also works in favour of the ground source heat pump.

First and foremost, you should know your domestic hot water will typically be heated to a much higher temperature when compared to your swimming pool. Since you wouldn’t be using the water to disinfect your bathroom or doing your dishes in your swimming pool, then the temperature can be much lower. In fact, it’s much more comfortable and enjoyable to heat to a typical “swimming pool temperature than having it at a hot bath temperature. If you’ve ever wandered into a really hot swimming pool, you wouldn’t need any introduction to the painful discomfort that comes next.

As a result of this low temperature, your “tiny heat pump can operate a in a more efficient way which makes the use of ground source heat pumps a viable swimming pool heating option. What’s more? The ground source heat pump works for a swimming pool just like any any other application - moving the heat from the region of a warmer temperature to the cooler temperature region.

How To Tile A Bathroom Wall

Tiling your bathroom walls will not only increase the visual appeal of your space, but also provide an additional layer which helps protect against potential moisture damage, moist growth and also makes the bathroom a lot easier to clean up. So if you’re are looking to tile your bathroom, it’s recommended to get in touch with a skilled professional to ensure you get the best results. However, this guide will provide you with a good insight on how to get through the process smoothly and avoid costly errors. Let’s take a look!

lPrepare The Wall’s Surface

• Make sure that the surface is clean, smooth and dry.

• If there are any dips or holes, ensure to have them patched or sanded.

• Measure the area to be tiled and shape the backer board to fit, if a new wall surface is necessary.

• Cover the new surface area with adhesive to attach the back board to the surface.

lMix The Mortar

• Firstly determine the tile layout and make a layout tool

• Install the datum

• Follow the instructions of the adhesive package as the type you’re to use depends on the wall type.

• Create a consistent and smooth paste by mixing the adhesive with water.

lInstall The Tiles

• Using a notched trowel, spread the mortar.

• Put a thin layer at the back of each tile and press it against the surface.

• Create ridges using the notched side of the trowel.

• Clear out any excess adhesive on the tile’s surface as you continue.

• Put the spacers at the joints

• Remove the datum planks when ready to install the outer edge tiles.

lApply The Grout

• Put the grout over te tiles with a grout float

• Clean out excess grout with a damp sponge

• Seal the tiles once the grout is dried