Find a Shop Fitter you can trust in Settle.

How To Install A Septic Tank

If you’re planning to get a new septic tank system or replace the existing one, you’d probably want to know if it’s a task you can do all by yourself especially if you happen to be a competent DIYer. However, unless you’re a heavy equipment operator, installation of a septic tank system is by no means a DIY project. And even if you have the heavy machine at your disposal and you know quite well how to use it, you’re still going to need the guidance of professionals.

You’re going to need the services of a soil expert to evaluate the site, a plumbing contractor to fit and connect pipes, an engineer to design a good system and more. You may want to be involved in all these but local health authorities requires that a licensed personnel should be in charge. In this article, however, you’ll discover the septic tank system installation process.

To install a traditional septic tank system, you’ll have to start by digging a hole for the tank following strictly the instructions provided on your approved plan by the local authorities. Do not drop the tank into the hole after digging, you’ll need to connect it to the building sewer with 3 or 4 inch waste pipe which should be at a minimum slope towards the tank. Then, extend a drain pipe from the other end of a tank to a the distribution box on the drain field.

Once completed, dig several parallel trenches of this box extension across the drain field. Put in a layer of gravel along with 3 to 4 inch perforated pipes in individual trench and connect the pipes with the distribution box and cover them once done.

A bathroom is not only a pretty big investment, but also one that requires thorough planning and consideration before the work can be kick started. This is a task all homeowners will all have to go through at least once and even more so when things break or become worn too terribly to consider repair. As a result, when it comes to fitting a shower you can be sure to dig a bit deep into your pocket to start and get the project over the line. In general, the cost of your new bathroom tend to vary based on the shower installation company or plumber you choose to hire, your location, the materials required, the type of shower and other furnishings chosen and more. In this post, we aim to give you a good insight into the shower fitting pricing so as to help you help you make informed decisions moving forward.

Generally, a standard shower usually costs within the range of £100 to £120 for installation and this usually takes about 3 hours to complete. For an electric shower, you should expect to incur within the range of £100 to £150 on the plumber and a similar price range for the electrician as well. And for the shower enclosure, you can expect to pay within the range of £150 to £250 for the labour and it’ll take up to 4 hours to complete. You’ll also factor in the taps,tiling, underfloor heating, extractor fan, bath, basin and toilet.

Overall, for a complete renovation of your shower, you can expect to incur within the range of £3000 to £5000 with the average duration of the job being 10 days. Meanwhile for a standard installation (only for bathroom fixtures), this will often cost within the range of £2000 to £2500 with an average job length of around 5 days.

When home or property owners decide to plant a Leylandii, they mostly think about how great it is as a hedging and screening plant and forgetting it also require a regular maintenance to keep in good shape. One thing about Leylandii are they do not re grow if you happen to cut back into the old wood. Once it turns brown, it will remain like that with no possible solutions to remedy the situation as they have little to no ability to regrow from the old wood.

In order to maintain your Leylandii hedge in good shape and order, that’s not too wide or too tall, then it’s recommended that it should be trimmed at least once a year. By doing this, you’re more likely to cut only into the new green growth which will enable the hedging plant look great and green with no brown patches. So when is the best time to prune a Leylandii hedge plant in a year?

Generally, it’s advisable to cut back mature or overgrown Leylandii hedges in the UK about two to three cuts between the months of April and August. By this time, your hedge plant will already be well established and ready for some maintenance and care. However, if there’s a chance that you might not be able to prune it on a yearly basis, the we’d suggest you get a slower growing alternative instead. Some of the alternatives which are slower growing and unlike Leylandii, can regenerate when cut back into the old wood are several types of Thuja as well as English Yew.

Below are some guidelines you can follow when trimming your Leylandii hedge:

• Do not cut Leylandii hedges during very forsty or hot weather.

• Do not cut the hedges during wet conditions to allow the cut dry and heal quickly.

• Make use of sharp tools.

• Cut on a cool and breezy day.

What Is A Gas Safety Certificate?

Do you wish to know what a Gas Safety Certificate is and if you need to get one?

If you’re in the UK and you own a rental property, you have a statutory obligation to obtain a Gas Safety Certificate. The law ( Gas Safety - Installation and Use, Regulations 1998) stipulates that landlords as a matter of necessity should have all their gas appliances, fittings,and property flues subjected to yearly checks in order to ensure that they’re are totally safe.

The Gas Safety Certificate can be referred to in a number of ways which includes Landlord Gas Safety Record ( LGSR) or CORGI PROFORMA 12 (CP12). The later dating back to when the official body for gas safety in the UK was CORGI. However, the official body is now known as Gas Safe, hence it’s now usually called a Gas Safety Certificate or something along that line. But regardless of whatever you choose to call it, as long as you reside in the UK, it’s crucial to know that if you need one as soon as possible. So how do know if you need a Gas Safety Certificate?

If you’re a homeowner with a property that you live in, you’re not required by the law to obtain a Gas Safety Certificate. There’s nothing like a homeowner’s gas safety certificate, however we’d recommend you subject all you gas appliances and pipework to yearly examinations to ensure they’re functioning properly and safely.

If you’re a landlord in the UK, you’re required by the law to get a Gas Safety Certificate to ensure your property is safe for your tenants. You must reach out to an approved Gas Safe engineer who’ll carry out annual checks on your appliances to ensure that they’re totally safe.

Air source heat pumps are a type of heating system that you can use to warm the air in your property. They’re a semi-renewable energy generator as, although they use electricity, they extract and use renewable heat from the air.

There are two main types of air source heat pump – air-to-water, and air-to-air. Air-to-water heat pumps are the most popular, and are best used to heat water that supplies underfloor heating systems or large radiators. Air-to-air pumps heat air, which is then dispersed round your property using fans.

Do you want a low carbon way of heating your home? Then, getting an air source heat pump is the way to go! What they do is pretty simple - they absorb the potential thermal energy present in the outside air and transmit it directly to the home or property where it’s going to be compressed and the heat transferred with the help of a number of coils. In other words, it functions by extracting heat from a cooler place and then uses it to raise the temperature inside a home or property. Being very similar to air conditioning units, the amount of heat they’re going to produce for your home or property will be dependent on the size you install. Therefore, the bigger the heat pump, the more the heat that’ll be generated.

Air source heat pumps have two main types which includes air to air and air to water. Air-to-water heat pumps works by absorbing heat from the outside air, then relays it directly into your home or property through the help of fans. In order to move the heat around your home, you’ll need a warm air circulation system. This type of air source heat pump are not eligible for the government’s Renewable Heat Incentive Payment as they can’t generate hot water. What’s more? They can function in reverse during the hot summer months.

Air-to-water heat pumps, on the other hand, operates by extracting heat from the outside air and transmitting it into the wet central heating system. Due to the fact that they’re able to generate heat that’s cooler than the one generated by a conventional gas or oil boiler, they happen to be a better fit for larger radiators or water underfloor heating.

Did you just purchase a double glazed window and confused about how to have it installed? Fitting the window yourself can be quite easy with the help of this step by step guide. However, if you lack proper training or experience, we’d recommend you reach out to a trustworthy professional who can guarantee the best results for help. That said, now let’s take a look at the process.

• Remove the old windows by detaching the old beading and glass window safely. Then make some interval cuts using a hand saw before using a crowbar to pry it out.

• Cut the external double glazed window seal. Once done, take a measurement of the window area’s width once empty. Then transfer the measurement to the window sil to face outside and cut using a handsaw.

• Seal the window sil. Add a bead of clear silicone along both inside lip as well as the centre to seal the sil.

• Screw the double glazed window to the sil. Position the window on the top of the lipped section that was siliconed. Then pre-drill them together and screw in three places. You should make sure the screws do not go totally to the sil’s bottom.

• Install the double glazed window. After successfully screwing the double glazed window to the sil, you can now fit in the double glazing. Make use of packers to make sure it’s even in the slot.

• Screw the uPVC window to the wall. If you’re happy and satisfied with the position of the window, you can then pre-drill through the frame of the window and the brick wall. Once done, simply screw it in place using masonry screws or Spax screw as they do not require crawl plugs in bricks.

• Seal around the window. To do this, simply fill any gaps with expanding foam, wipe out the excess and seal with silicone.

The deposits of asbestos are commonly found in both rocks and soil throughout the globe. Historically, this material has been incorporated for more than 4,500 years for a number of purposes by our ancestors. However, mining of asbestos in large scale started only in the 1870’s in Quebec, Canada. It only took about a decade after this commencement before other countries picked the trail and also began the production of asbestos for industrial uses as asbestos rapidly grew to become an ubiquitous phenomenon across many nations of the world such as the USA, Russia, Italy as well as South Africa.

Today, several countries have placed a total ban on the production as well as exportation of asbestos as a result of the harmful fibre it contains. Asbestos has been discovered to be a life threatening material which when disturbed, it releases a harmful fibre that can lead to a number of serious health issues if inhaled over a long period of time. Most recently in 2019, the material was popularly banned in Canada, who for several years has operated the world’s largest mine of asbestos in Quebec.

Despite how harmful the material is, it’s however still being mined in some countries with some of its exporters being Russia, Kazakhstan, China as well as Brazil, with Russia taking the lead, covering for over 53 percent of the world’s total production.

Contrary to many beliefs, asbestos is not a man made material but a group of six types of naturally occurring fibrous minerals that are commonly found in rock and soil which are collectively known as asbestos. These minerals are primarily composed of both silicon and oxygen but also includes other minor elements.

There are a wide range of benefits you stand to derive by installing solar panels for your business operations. Not only can it help you save money,  but it can also go a long way to help reduce your business’ environmental footprint. Regardless of whether your company is big or small, it can still benefit immensely by making use of solar panels. If you’re considering the installation of solar panels in your business environment, then you probably want to know just how much it’ll cost to complete the project. In order to help you make the most informed purchase decision, we’ve created this post to give you a good insight into commercial solar panel pricing. Let’s take a look!

Generally, the cost of commercial solar panels is within the range of £16000 to £70000 for small to mid-sized companies. However, there are a number of factors that can influence the cost of commercial solar panels which includes the size of the roof, the amount of energy that’s generated as well as the number incorporated. There is a need to evaluate the cost of solar panels so as to determine whether or not they’re a feasible option for your business. In order to determine the amount of energy your company uses per month, simply take a closer look at your utility bill.  This should indicate just how much energy you use per month as well as how much the utility company charges per kW. In general, most small to medium sized companies will incorporate 30,000 to 50,000 kWh annually and you can expect the cost to differ based on your location and the size of your system. The rule of thumb with larger systems is to calculate using £1000 per kW, plus VAT as the yardstick.