Find a Shop Fitter you can trust in Coalville.

Sealing your driveway isn’t 100% necessary, but it is recommended. It will help keep your driveway in good condition and increase how long it lasts. Sealer should be applied approximately once every 2 years, or when your driveway begins to show signs of deterioration.

In 2002 the Government amended Building Regulations governing the replacement and installation of glazing units. For the first time, windows had to meet energy efficiency standards and tough thermal performance levels. For new window units you must have efficiency ratings of at least a level C.

How Much Is A Landlord Gas Certificate?

Do you know as a landlord in the UK, not only does the law requires you to conduct an annual check on all your gas appliances and chimney, but you’d also have to pay for it? Hence, giving birth to the commonly asked question, how much is a landlord gas certificate? With so many variances in CP12 certificate prices everywhere, it can be so confusing knowing the actual one you’re expected to pay. Just by surfing the internet alone you’d come across loads of ads claiming they can help you with a cheap gas safety certificate only to discover that reverse is the case when you reach out to them. Here, you’ll get to know the real amount you’re expected to pay for the annual checks on your gas appliances and chimney.

First and foremost, let’s look at what a Gas Safety Certificate really is. This is a certificate that’s given out to landlords and property management companies after a check has been carried out on all their gas appliances and chimney. This statutory check is expected to be done every 12 months to ensure the safety of all those who make ue of your rental property. Homeowners living in ther property are not required by the law to conduct annual gas safety check, but it’s highly recommended that you get in touch with a Gas Safety engineer to ensure the safety of both you and your loved ones.

As a landlord in the UK, to get all your gas appliances and chimney inspected by an approved Gas Safety engineer and obtain your Gas Safety Certificate, you’re expected to pay within a range of £55 to £65. However, you should note that this cost will increase depending on the number of gas appliances you have (about 30% increase for each additional gas appliance).

It is crucial to make the walls of your bathroom waterproof, and bathroom wall panels or bathroom cladding is not only a great way to do that, but its also the easiest way to update the look of your bathroom. When it comes to adding wall panels to your bathroom, there are a large selection of designs to choose from which means you’ll always find something that’ll suit your space. So how do you have them installed? With this brief guide, you’ll learn everything you need to know about the bathroom panels installation. Let’s have a look!

1. Get the right tools and supplies. You’ll require a handsaw, jigsaw, or circular saw, hacksaw, drill, hammer, 1200mm spirit level, sealant gun, suction cups and tape measure.
2. Prepare the bathroom. Ensure that the bathroom walls are degreased, clean and, dust and dirt free. Also make sure that its flat and even with a spirit level.
3. Make sure a fixing method is in place. If not, make use of treated battens as a fixing method. Fit all battens in such a way that’s plumb and parallel.
4. Fit the shower tray. Take a measurement of the shower tray to identify the length of the seal strips that is needed while also making room for the shower screen.
5. Add the seal strips.
6. Cut the panels to size. Mark the bathroom wall panels and cut to get the right measurement in both height and width. Also ensure to make room for pipe and shower head holes at this point.
7. Install the panels.

What Is A Conservatory?

A conservatory is basically a structure constructed on a property that’s usually attached to the side of a home. It’s a room as well as a greenhouse that’s constructed with the help of a wide range of materials which includes bricks, wood, glass and polycarbonate. A conservatory is typically built with a great amount of glass which enables it to offer huge amount of sun and light. During construction, the idea is always to muster sufficient sunlight for the plants while also enabling a cosy room within the structure especially during the cold months. Generally, conservatory extensions’ walls are made of over 50 percent of glass, while their roofs are usually made up of more than 75 percent glass.

Thanks to the advancement in technology, conservatories have also greatly developed over the years. They’ve significantly evolved from the usual luxury greenhouses to normal and everyday home extensions. Conservatories have also grown to become very energy-efficient while also providing super comfort to the extent that they’re now being used throughout the year. And while it’s formerly known to be an occasional room, it’s now more of a home’s extension.

Legally, conservatories are usually covered by what’s called the permitted development rights which exempts them from both planning permission and building regulations. The conditions below form the legal definition of a conservatory to differentiate it from an extension.

✓ Below 30 square metres in size

✓ Constructed at ground level

✓ Separated from the main building by external walls, doors or windows.

✓ Possesses its own stand alone heating system

✓ The glazing as well as fixed electrical fittings are in compliance with the relevant building regulations.

Did you just purchase a double glazed window and confused about how to have it installed? Fitting the window yourself can be quite easy with the help of this step by step guide. However, if you lack proper training or experience, we’d recommend you reach out to a trustworthy professional who can guarantee the best results for help. That said, now let’s take a look at the process.

• Remove the old windows by detaching the old beading and glass window safely. Then make some interval cuts using a hand saw before using a crowbar to pry it out.

• Cut the external double glazed window seal. Once done, take a measurement of the window area’s width once empty. Then transfer the measurement to the window sil to face outside and cut using a handsaw.

• Seal the window sil. Add a bead of clear silicone along both inside lip as well as the centre to seal the sil.

• Screw the double glazed window to the sil. Position the window on the top of the lipped section that was siliconed. Then pre-drill them together and screw in three places. You should make sure the screws do not go totally to the sil’s bottom.

• Install the double glazed window. After successfully screwing the double glazed window to the sil, you can now fit in the double glazing. Make use of packers to make sure it’s even in the slot.

• Screw the uPVC window to the wall. If you’re happy and satisfied with the position of the window, you can then pre-drill through the frame of the window and the brick wall. Once done, simply screw it in place using masonry screws or Spax screw as they do not require crawl plugs in bricks.

• Seal around the window. To do this, simply fill any gaps with expanding foam, wipe out the excess and seal with silicone.

When winter approaches, the temperature drop is usually a concern for several homeowners, after all having to heat your house regularly can only imply energy bills to settle. So whether you’re looking to upgrade your central heating system or perhaps your boiler is completely broken, the price as well as efficiency are crucial factors you must put into consideration before making an investment decision. In this article, we’re going to look at the most affordable heating system option between solid fuel and gas. Let’s take a look!

Heating your hot water system via a water back boiler in your stove only demands just a fraction of the price when compared to the highly expensive liquefied gas alternatives. Although the price of coal as well as other solid fuel has also been on a gradual increase in the past couple of years, the fact remains that this increase is still nothing compared to the spike in gas prices. What’s more? Gas boilers, more often than not, comes with at a ridiculously high price which makes it a major turn off for many homeowners who are on a tight budget.

There are a plethora of affordable solid fuel sources, but it’ll be wise to check in with friends or neighbours who stays nearby before you you make an investment decision. This is mainly due to the fact that purchasing fuels in bulk can earn you a good discount as well as the peace of mind knowing that those living under your roof are warm and super convenient in the cold too. And not only are solid fuels more affordable than gas, but they’re also a lot cheaper than liquid fuels, which implies that you can afford to buy quality products to make sure your systems operate efficiently and smoothly.

How To Clean And Maintain Metal Roofs

If you already have a metal roof or just planning to get one, you’d probably be interested in knowing the cleaning and maintenance procedures. Although, metal roof are widely known to be very easy to clean and maintain and also very durable and long lasting, it’s still strongly recommended that homeowners should do all in their power clean and to take care of their metal roof in order to ensure it they live up to their potentials. Cleaning your metal roofs regularly helps to minimize damaging element such as airborne dirt, pollen, organic material debris, pollution, mildew and lots more. If left unattended to, these unwanted elements can result in several negative issues over time as such as chalking. Due to fact that metal roofs normally features special coatings as well as paint, cleaning the roof is both easy and environmentally friendly, which removes the need to use toxic chemicals. With just plain water, you can effectively wash down dirt, dust and other debris from your metal roof.

While the cleaning process is quite simple, working at height can be incredibly dangerous. It requires skills and confidence, so if you lack either of these qualities, it’s advisable to call in a professional roof cleaning contractor for help. Below is a simple cleaning solution usful for most metal roofs.

✓ In the event whereby water alone isn’t enough, make a cleaning solution using a quarter cup detergent ( which should include car washing soap, mild laundry detergent, mild dish soap) for each gallon of water.

✓ Apply the mixture to the surface of the roof with a wash cloth and ensure to the application gently.

✓ After application, allow it sit for up to 15mins.

✓ Rinse the roof surface with plain water.