Find a Shop Fitter you can trust in Carluke.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

With the prices of buying a house skyrocketing, many of us are tempted to building our own house. This is sometimes an excellent choice, but you will first need to understand the costs of building a house from scratch. As per a general estimate, the cost of self-build ranges between £300 per m2 to £3,000 per m2.

As you can see, this is quite a variation in price from lowest to highest. Location is a prime factor in determining the costs. Building a house in London and the South is more expensive compared to other regions. Aside from location, several other factors make up the price.

Self-manage with subcontractors

You hire professionals directly like builders and carpenters. You also buy all the materials yourself allowing you to get the best prices.

Hiring a main contractor with other subcontractors

You will first need a main contractor who will help to create the watertight structure for your house. For the rest of the work, try hiring out subcontractors. Make sure that you buy all the materials yourself to get the best price.

External cladding materials

If you are looking to install other external material other than brick, you will also need to factor in the cost for the same.

Here are some example prices:

• Render on blockwork costs around £25 per m²

• Timber cladding is around £25 per m²

• Hand¬made all-weather tiling costs around £54 per m²

• Rubble walling or flint is around £90 per m²

• Reconstituted stone costs about £48 per m²

• Natural stone is about £75 per m²

Make sure to include these costs when coming up with the estimate.

Roofing materials

Non-standard roofing materials tend to add more to the cost and therefore you will also need to account in for this factor.

Here are some examples:

Welsh slate – £60 per m²

Second-hand slates – £35 per m²

Handmade clay tiles – £65 per m²

Reed thatch – £80/m²

If you choose to add any unique material to your roofing, be sure that you remember to factor in its cost.

Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.

If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.

How To Paint A Room

Painting is a joyful task and it’s quite obvious why it’s one of the most popular DIY projects. Whether you’re painting as an experienced DIYer or as a newbie, this step by step guide will put you in the right direction. However, if you lack the confidence to carry out this task, then we’d recommend you get in touch with a seasoned professional who can guarantee the best results for help. This way, you get to save some time and additional money that would have resulted from possible costly errors.

So just before you head right into the task, there’s the need to determine the type of pain finish you would love to use which is to choose a colour. Now let’s get started!

• Prepare the room

✓ Remove all objects as much as you can from the room and cover the remaining furniture or objects with a sheet.

✓ Fill all holes on the surface to make for an even finish.

✓ Wash the wall with the help of a damp sponge. A sugar soap or diluted washing up liquid will work just fine.

✓ Tape the edges of objects you do not wish to paint like light switches, plug sockets and the likes.

• This step can be skipped if painting on an existing paint, but it’ll advisable to dilute small quantity of your selected paint to patch prime the holes that you’ve filled. If you have a large number of holes that was filled, then priming them would be smart.

• Mix or stir the paint thoroughly in a paint kettle to ensure an even and perfect mix.

• Now you’re ready to start painting! Start from the edges to form like a frame to work within with your roller. Once done, leave for about 4 to 6 hours to dry.

• For the second coat, simply repeat the above step to complete your painting project.

When it comes to boosting the value of a property, there are a bunch of home improvements one can make to increase a property’s value. One of these improvements that can add to both the value as well as saleability of a home is a lean to conservatory. So exactly how much value does a conservatory add?

According to several studies carried out, a lean to conservatory should add anything within the range of 7% to 15% of the average property value in the UK. This equals thousands of pounds which ultimately translates that home and property owners can recoup some or even all of their cost of investment in the extension with relative ease. However, in order to determine the exact value added, you’d have to calculate the value of your investment. These includes determining the amount of money the lean to conservatory will cost including installation, the current value of your property as well as the amount of value the conservatory will add to your property. Doing this will help you determine how wise the investment in a lean to conservatory will be.

At present, the average price in the UK stands at about £240,000 and according to the experts, lean to conservatory should add with the range of 7 percent or 10 percent of that price in terms of value. In other words, the value of your property can rise by close to £17000. And if the total cost of building the lean to conservatory is about £9000, that means you’ve made a profit of up to £8,000. Besides this, there are also some other significant values and benefits offered by installing a lean to conservatory which includes more living space, aesthetic appeal and many more.

Can A Locksmith Make A House Key Without The Original?

If you’ve misplaced or lost the last set of your house keys, you’d probably be wondering if a locksmith can help replace the key without the original. If true, then you should know that a locksmith can cut a new key for you with the help of their expertise and tools without having to give them the original one. A professional locksmith can achieve this in three separate ways. Let’s have a look!

• Cut The Key By Code

What makes physical keys unique is basically the spacing and depth of their cuts. During the manufacturing process, manufacturers often stamp some characters also called key codes on the lock or include them in the lock’s manual. With these characters, a locksmith has all that’s needed to create a new key without having to see the original one. Using HPC Blitz key generator or any other code cutter and the right key blank, a locksmith can give you a new key. However, in cases whereby the key does not come with any code, the locksmith can obtain the needed information via the manufacturer or the retailer who possess such information.

• Impression The Lock

To complete this key cutting process, the locksmith will need a key blank, a file as well as a vice grip. This procedure entails inserting the right key blank into the lock, followed by turning it to bind pins within the locks cylinder. This process will enable the locksmith determine the sections that requires to be filed on the key blank. It also involves inserting and removing the key from the lock several times in order to get all the needed cuts. However, it must be noted that various key blanks like brass, steel and aluminium blanks require a special attention to ensure they do not break during the process

• Disassemble The Lock

To disassemble a lock, the locksmith will first pick the lock. However, in the event whereby a broken key is stuck in the keyhole, then you may want to consider an entire lock replacement. The disassembling process is a very delicate one that involves the internal mechanisms of the lock and should not be done unless by a true professional.

How To Paint Exterior Window Sills And Frames?

Painting your exterior window sills and frames can be a very joyful and fun-filled activity if you know what you’re doing. It’s a task that can be completed in little time by an experienced DIYer, however if you do not have the confidence to pull off this project, then you’d be better off calling in a professional for help to avoid costly mistakes. In this guide, we’ll take you through the exterior window sills and frames painting process.

✓ Prepare the window sills and frames. This includes, brushing the surfaces with warm water and gentle soap, scrubbing the windows to ensure all the edges and cracks are free from all forms of dirt, rinsing it with water and use a soft, clean cloth to wipe off any excess liquid and finally, drying it off with a towel or leaving it to dry off by itself before you start to paint.

✓ Remove any signs of moulds and moss, fill in the cracks between frame and glass using a multi-purpose filler, sand the frame and wipe out any dirt or dust on or around it using a vacuum cleaner, a clean cloth or soft brush. Once done, you can then apply a coat of water-based primer and let it dry off before painting.

✓ Painting. Firstly, you’ll have to sand your primed windows to make an even, smooth surface and apply an undercoat evenly to the surface. Once completed, you can then apply at least 2 coats of paint using a quality brush. Make sure you sand the first layer carefully before you apply the second to get a great finish.

✓ Once dried, you can the finish with a top coat (make sure you go for a weather proof paint for the exterior). For the window sills, you’ll have to apply the exterior paint gently with masking tape around the edges to protect the walls from the dripping paint.

Most Sun Tunnel Kits are available in sizes from 250mm Diameter to 550mm Diameter. This gives you a good range to choose from depending on the size of the room you are trying to brighten.

• 250mm Sun Tube – Perfect for room sizes up to 10m2. (Hallways, Small Bathrooms)
• 350 – 450mm Sun Tubes – Perfect for rooms 10 to 15m2. Larger Hallways, Stairwells and Bathrooms.
• 550mm Sun Tube – Ideal for rooms 15 – 22m2. Kitchens, Bedrooms, Living Rooms.