Find a Shop Fitter you can trust in West Malling.

The best alarm system is really what suits all the demands details to a customers needs as well as the home itself. A properly carried out site survey in accordance with EN50131 gives a well trained installer the special site and also client details they call for to supply the most effective system

There is no such things as the most effective intruder alarm system. Each of the main makers provide a range of alternatives which can be made use of to make a suitable alarm system for your building. That claimed, if you are checking out wireless, you require to think about 3 things:

1. Is the way you want interact with the device.

2. How signals might obtain from one location of a residential or commercial property to another, ie, signal repeaters.

3. Radio jamming, only a few manufacturers have superhigh frequency intending to get rid of the chance of a radio signal being blocked.

All systems ought to consist of equipment that if mounted effectively could fulfill the qualities of security system in accordance of the present alarm standards. Petwise sensing units are not suggested as an ideal secure solution, as a result of the method these sensing units work as animals can trigger false alarms and some intruders can bypass them relatively easily. If the alarm system is purchased from a diy electrical outlet or is not graded after that it must be prevented, please note that safety grades just use if mounted to the requirement they were created for.

How To Paint Exterior Walls

Painting of exterior walls is a value adding task which can be done by any competent DIYer. So if you’re confident enough to pick up a brush and roller, then all you need to do is to follow the instruction in this step by step guide and you’d be glad you did. Painting your exterior walls yourself can save you lots of money that would rather have been spent on hiring the services of a professional painter and decorator. However, if you don’t feel confident enough to pull this off, then it’s advisable to call in a reliable painting specialist who can guarantee the best results for help. Here, we’ll take you through the needed steps to complete the painting of your exterior walls.

✓ Surface Preparation. This involves protecting all fencing and exterior wall component that’s not to be painted with a drop cloth or masking tape. You’ll also need to completely wipe out any dust before you start to paint a plaster surface. If it’s a previously painted wall, you’ll also need degrease it and remove or scrape off any loose areas of the plaster.

✓ Priming. This involves preparing the primer as instructed in the manufacturer’s guide. Then start to prime the surface by using a brush or a small paint roller to prime the corners, little items as well as all surfaces that are difficult to reach. Once done, then you can tackle the larger surfaces using a larger paint roller.

✓ Painting. To start painting your exterior walls, you’d have to prepare the product first by missing it thoroughly as instructed in the manual. Once done, you can repeat the same process as given in the priming stage above using your paint this time. Once done, you can decide to apply a second layer within a minimum of 4 hours after applying the first layer.

Generally, you wouldn’t need to get in touch with a quantity surveyor prior to purchasing a property, unless of course your property is a very unique and unusual one. After making a commitment to buying a property or to kick start a construction project, then you might want to start taking into consideration getting in touch with a quantity surveyor. The best time for a quantity surveyor to carry out an inspection of the property is right after settlement and just before the tenants moving in. This is to ensure that the quantity surveyors do not disturb the tenant and they also get to fully go through what you’ve purchased as well as the condition it’s in.

Quantity surveyors will help you by working with architects, accountants, engineers, building owners, builders, developers, financiers, government, insurance underwriters, loss adjusters, sub contractors as well as solicitors. What’s more? The in depth knowledge quantity surveyors possesses when it comes to construction costs enables them to carry out a number of useful tasks to help you.

Prior to construction, quantity surveyors can prepare a feasibility study, estimate to defined the project budgets, carry out an analysis to refine the budget as the design documents develop, prepare Bill of Quantities so as to help with the tender process and also to carry out a review of Builder’s tender submissions. While the construction is ongoing, they can help provide cost control services, carry out an assessment of the builder’s progress claims and also undertake an assessment of variation and delay claims. Finally, after the construction, they can assist with the determination of the final project cost, prepare the tax depreciation reports for both investors as well as property owners and also prepare Expert Witness reports to assist in the settlement of building disputes.

How To Replace Flat Roof Felt

Also referred to as tar paper, roofing felt is installed underneath the roof’s shingles to help deny water access to your home. Installing the roofing felt in overlapping layers builds a water barrier in situations whereby the weather damages or blows away the shingles. Although the application of a roofing felt on a flat roof is relatively easier and safer than working on a peaked roof, it’s advisable to take enough care and precautions. If you lack proper training and experience for this task, we’d recommend you employ a reliable professional to guarantee the best results and save you from further headaches especially in cases whereby unfortunate errors are made. This step by step guide will give you a good insight into the flat roof felt replacement process.

• Take a measurement of the width and length of the roof.

• Calculate the square footage by multiplying the numbers.

• Multiply the square footage gotten by three (it’s advisable to install three layers of roofing felt to create a really strong weather barrier).

• Use a claw hammer to remove the existing roofing felt.

• Use utility knife to cut the new felt to fit the length of the roof.

• Place the first piece along the roof’s edge and use a hammer tacker to tack the felt in place with staples or galvanized nails and hammer.

• Put the staples or nails at every 6 inches along the side touching the roof’s edge as well as down the short sides.

• Repeat the same process for the second piece, laying it out beside the first row of felt.

• Cut a piece of felt to the appropriate length using a utility knife to begin the second layer of roofing felt, and cutting it in half, lengthwise.

• Apply construction adhesive along the first row using a trowel.

• Press the first piece for the second layer onto the adhesive. Repeat this process until the roof is covered with a second layer

• Apply construction adhesive over the second layer to install the third layer. Begin with a full piece of felt without cutting it in half.

• Overlap each piece by 2 inches until you’ve completely installed the third layer.

If you’re planning on adding a house extension to your property, you’d probably be worried about whether or not your proposed extension would require a planing permission. Well, it may be relieving to know that not every house extension project would require a formal consent, and in fact, several extensions are covered by the permitted development rights. Not only can this save you a considerable amount of time especially at the project’s planning phase, but it’ll also save you money on the application fee. In the UK, single storey extensions to the house’s rear can be 3 metres deep for both semi detached houses and terraces or 8 metres deep for detached homes.

So how do you know when you’d require a planning permission for your home extension? Well, if your extension plan fits these criteria explained below, then your project is most likely going to be allowable as a permitted development.

• Extensions, which includes previous additions, must not go beyond half of the original house’s total surrounding land area.

• The main elevation, or side elevation where it fronts the highway, must not be extended forward.

• For single storeys, the rear additions must not extend more than the original house’s rear by more than 3 metres in both semi attached homes and terraces (4 metres for detached houses).

• Extensions to the side must be a single storey with a height not exceeding 4 metres and not going beyond 50% of the original house’s width.

• Extensions hat within 2 metres of a boundary should have a eaves height not more than 3 metres.

• Multi storey addition must not extend beyond the original house’s rear wall by a maximum of 3 metres or 7 metres of the boundary opposite the rear wall.

• Permitted development rights do not apply in listed buildings or designated areas.

It’s important to get the right size solar panel system for your commercial property. Solar panels are usually installed on pitched roofs, although they can be fitted on stands on the ground if you have some unused outdoor space. The more panels you install, the more power you’ll generate, but there’s no point buying more panels than you have space for.

Solar panel system sizes are measured in kW. 4-10kW solar panel systems are usually too big for domestic properties but are ideal for smaller commercial properties. Here’s an idea of how many panels and space you’ll need for a few different system sizes:

System size, Number of panels, Area required (approximate)

4kW, 16, 23m²

6kW, 24, 35m²

8kW, 32, 46m²

10kw, 40, 58m²

Bear in mind that solar panels can’t be less than 30cm away from a roof edge, so you’ll need more space than the area that the panels take up.

NO - as air conditioning systems use fluorinated gases as refrigerants, all work on them must be done by professionals holding valid F-Gas certification. There is a range of different qualifications and certifications that apply for this, so it's always best to ask someone who is qualified to do this.

Different types of gardening work will need to be carried out at different times of the year. Garden maintenance is a year round job, although the amount of work will usually decrease during the winter. For larger landscaping projects, aim to have these done through autumn, winter and early spring, to give plants time to get established before summer. Be aware that poor weather over winter can slow down the work.