Find a Shop Fitter you can trust in Hemel Hempstead.

Installing wooden flooring is a quite simple process, however to get it right the first time, there are very essential preparations that must be made. These includes determining the site is in the best condition before installation, removal of all floor coverings and underlay for a more stable and durable installation and incorporation of the right expansion gap of about 10mm to 12mm which would be maintained around the floor’s perimeter.

Wooden floor fitting can be done on two types of sub-floor - Concrete and Plywood. To install onto concrete, you can follow the guide below:

• Incorporate flexible wood on concrete adhesives.

• With the help of a 3mm toothed trowel, spread above 2 board widths of adhesive along the starting wall sub-floor, beginning at a corner of your room.

• Position the first row of flooring into the area that is glued using the tongue facing opposite the wall.

• Put 10mm spacers against the wall to see to the consistency in expansion gaps.

• Make sure the joints are at a minimum of 150mm apart from the first row when fitting the second row.

• Utilize pre-cut smaller boards if you’re to start a new row with staggered joints.

• Continue with this nailing method and make sure the 10mm expansion gaps are consistent around the floor’s perimeter.

To install onto plywood, you can follow this guide:

• Make use of a porta-nailer.

• Position 10mm spacers against the wall - parallel with the installation direction.

• Fit the first row using the tongue facing opposite the wall and with the help of the porta-nailer or flooring nailer.

• Lay the second row and make sure the short end joints are at a minimum of 150mm apart from that of the first row.

• Utilize pre-cut smaller boards if you’re to start a new row with staggered joints.

• Continue with this nailing method and make sure the 10mm expansion gaps are consistent around the floor’s perimeter.

Click here to learn more about wood flooring.

In some cases, it’s possible to convert a basement into an apartment. This can be a great way to incorporate an additional dwelling into your property and increase its value. However, converting a basement into an apartment can be quite expensive and time-consuming.

As with any type of dwelling, you’ll need to think about basic things like access, damp proofing, ventilation, insulation, heating, electrics, plumbing, lighting and décor. If you’re planning on extending your basement, then you’ll also need to ensure that your property is sufficiently supported.

It’s a good idea to consult a professional, like a basement conversion building specialist, to find out how feasible your project is before you go ahead with it.

When your boiler is being replaced you won’t have hot water or central heating. If you don’t mind this you can stay in your home, and use portable electric heaters if needed. Most installers undertake a power flush before installing a new boiler now and this can cause muck and debris from the pipework, so you may wish to get out of the way while this is happening!

Generally, you wouldn’t need to get in touch with a quantity surveyor prior to purchasing a property, unless of course your property is a very unique and unusual one. After making a commitment to buying a property or to kick start a construction project, then you might want to start taking into consideration getting in touch with a quantity surveyor. The best time for a quantity surveyor to carry out an inspection of the property is right after settlement and just before the tenants moving in. This is to ensure that the quantity surveyors do not disturb the tenant and they also get to fully go through what you’ve purchased as well as the condition it’s in.

Quantity surveyors will help you by working with architects, accountants, engineers, building owners, builders, developers, financiers, government, insurance underwriters, loss adjusters, sub contractors as well as solicitors. What’s more? The in depth knowledge quantity surveyors possesses when it comes to construction costs enables them to carry out a number of useful tasks to help you.

Prior to construction, quantity surveyors can prepare a feasibility study, estimate to defined the project budgets, carry out an analysis to refine the budget as the design documents develop, prepare Bill of Quantities so as to help with the tender process and also to carry out a review of Builder’s tender submissions. While the construction is ongoing, they can help provide cost control services, carry out an assessment of the builder’s progress claims and also undertake an assessment of variation and delay claims. Finally, after the construction, they can assist with the determination of the final project cost, prepare the tax depreciation reports for both investors as well as property owners and also prepare Expert Witness reports to assist in the settlement of building disputes.

How To Tile A Bathroom Wall

Tiling your bathroom walls will not only increase the visual appeal of your space, but also provide an additional layer which helps protect against potential moisture damage, moist growth and also makes the bathroom a lot easier to clean up. So if you’re are looking to tile your bathroom, it’s recommended to get in touch with a skilled professional to ensure you get the best results. However, this guide will provide you with a good insight on how to get through the process smoothly and avoid costly errors. Let’s take a look!

lPrepare The Wall’s Surface

• Make sure that the surface is clean, smooth and dry.

• If there are any dips or holes, ensure to have them patched or sanded.

• Measure the area to be tiled and shape the backer board to fit, if a new wall surface is necessary.

• Cover the new surface area with adhesive to attach the back board to the surface.

lMix The Mortar

• Firstly determine the tile layout and make a layout tool

• Install the datum

• Follow the instructions of the adhesive package as the type you’re to use depends on the wall type.

• Create a consistent and smooth paste by mixing the adhesive with water.

lInstall The Tiles

• Using a notched trowel, spread the mortar.

• Put a thin layer at the back of each tile and press it against the surface.

• Create ridges using the notched side of the trowel.

• Clear out any excess adhesive on the tile’s surface as you continue.

• Put the spacers at the joints

• Remove the datum planks when ready to install the outer edge tiles.

lApply The Grout

• Put the grout over te tiles with a grout float

• Clean out excess grout with a damp sponge

• Seal the tiles once the grout is dried

It’s up to you what size gravel you use for your driveway, but there are some guidelines that are worth following. If you go too small, your gravel will get displaced easily. But, if you go too big, you driveway might be quite tricky to walk on. Generally, it’s a good idea to go for a gravel size somewhere between 10-20mm.

A real headache is having graffiti on brick. This material is porous which enables paint to sink with ease inside all of the surface’s grooves. Unlike wood, they can’t be scraped and if it happens to be an internal wall, it can’t be sand- or water-blasted. Here, chemical and gel masonry stripper are your best bet. And while stripping of the brick is not a complex task, it does involve a number of applications of stripper and multiple scrubbing which makes it very time consuming.

Basically, a fresh and wet paint should be soaked up with am absorbent material without wiping the paint in order to spread the stain. Once done, you can then proceed to apply a suitable solvent like white spirit. After this, wash the area using a degreasing agent taking care in the disposal of the run-off material.

With dried paint, simply scrape off the paint as far as possible and apply a paint removal using the following steps:

• Put on your safety gear like a face mask, safety googles and gloves.
• Apply the paint stripper over the brick wall with a brush starting from a corner at the top of the wall and then working outward and downward.
• Leave for the specified amount of time by the manufacturer. Then start to scrub off the masonry paint stripper beginning at the top of the wall again. Remove as many paints as possible.
• Use rags and warm water to wash the brick wall and allow it to air dry.
• Repeat the process over again to remove every form of stubborn paint that’s left.
• Use a white vinegar to spray the stripped brick wall and wipe off any residue of paint with a brush and rinse with water.

Composite front doors offer a wide range of benefits which includes numerous style and colour options, increased security, personalization options, durability as well as low maintenance requirements. However, with so many options available in the market, it’s also expected that the prices would vary greatly depending on many factors. These factors include the colour, style of the composite door, glazing option, door furniture as well as security locks.

• Colour - More popular and basic colours like white, blue and brown black are manufactured in mass, making them a bit lesser than the unusual colours as they usually go through an expensive colour mixing process.

• Style Of The Door - The most common and popular door styles are manufactured in large quantities and consequently, the cheaper option than the more complex styles. A good example is the six panel door that features two frosted glass inlays will definitely cost more than the four panel plain white composite door.

• Glazing Option - The glass type, design and panel size all play a huge role in determining the price. The more complex your glazing option is, the more money you’ll have to pay.

• Door Furniture - Several composite doors come with bespoke handles, letterplates and knockers to achieve your desired finish. The furniture additions on door can also play a huge role in influencing the overall cost of your composite door.

• Security Locks - Multi point locks typically comes as a standard. However, you might need to determine the type required by your as the quality and type can vary considerably.

Generally, to have a basic style composite door installed, you’ll have spend about £850 and above. And depending on the design requirements and glazing features you select, this price can increase significantly.