Find a Shop Fitter you can trust in Rhosneigr.

If you just acquired an electric shower or thinking about getting one soon, one of the first things that comes to mind is who to call on for help to handle its installation. Well, if you’re confused about the perfect tradesperson you’re certainly not alone! As we’re always told that electrics and water don’t mix, so who do you call when buying an electric shower? Is it a plumber, an electrician or probably someone who with a knowledge of both? Well, you’d find the answer here as we’ve created this post specifically to resolve this concern once and for all.

Refurbishing and renovating any part of one’s home always tends to be a tricky and daunting prospect and without a single doubt, the bathroom is not an exception. With a wide array of things to put into consideration such as plumbing as well as bathroom electrical safety, it always pays to have all your bathroom related questions answered before you go ahead to employ a tradesperson.

Being fully aware any task involving electrical works can be very dangerous, anyone that takes on a job such as fitting an electric shower must be qualified to work with electrics safely. This is referred to in the building regulations sections which is termed as part P dealing with domestic electricals, as such you may hear tradespeople term themselves as being “Part P qualified. What this implies is that they’re registered with a competent persons scheme like ELESCA OR NICEIC to self certify their work. Due to the high risk involved in their field, all electricians should be able to self certify their work, whereas only some plumbers should also be able to do the same. As a result, dedicated bathroom fitting companies should possess individuals who can deal with the plumbing, electrics as well as tasks such as tiling.

• Don’t buy cheap solar panels – while it might seem tempting, make sure you choose MCS-certified solar panels. Any reputable installer will recommend high quality solar panels, which is another reason to have them professionally installed rather than doing it yourself.
• Ensure that your installer uses non-combustible mounting systems and frames.
• Check your system regularly for signs of pests gnawing through cables.
• Keep your solar panel system regularly maintained with proper testing and servicing carried out as recommended by your installer.
• If something doesn’t look right to you, get in touch with your installer and ask – they should be more than happy to help.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

If you’re looking to install a solar thermal system in your home, this is usually one of the first concerns several homeowners have. Being fully aware that solar water heating systems are usually more expensive than their counterparts - the conventional water heating systems, the question arises whether or not you’ll be able to save some money from your solar water heating system in the long run. In this article, we aim provide an answer to this important question. Let’s take a closer look!

When it comes to solar thermal systems, the money you’ll be able to save in the long run depends on a wide range of factors. These factor includes:

✓ Your system’s performance.

✓ Your geographical location and solar resource

✓ Your household’s hot water demand

✓ Financing and incentive options that are available.

✓ The cost of fuel that’s being used for your alternative or backup water heating system, if you own one.

✓ The cost of conventional fuels such as oil, electricity or natural gas.

There are several benefits, however, that comes with the installation of a solar water heating system. Since the sun is absolutely free, future fuel shortages and price hikes will have little impact on you. Also, on the average if you decide to fit a solar thermal system your water heating bills is expected to drop about 50 percent to 80 percent. What’s more? The economics are even a lot more attractive when you’re just about to build a new home or refinancing. When you include the price of a solar water system in a 30 year mortgage, it’ll normally amount to very low price per month. Therefore, on a monthly basis you’ll be saving more and paying less.

How Much Does It Cost To Move A Gas Meter?

When your gas meter is not in the right location while completing your renovation works or extending your property, it can be a worrying experience.

As a homeowner, you’re not allowed by the law to move your gas meter by yourself - it’s a very dangerous task that’s too risky to undertake just by watching a Youtube video or reading a blog post. Moving of a gas meter can and should only be carried out by a qualified and licensed gas supplier. And this, ultimately, gives rise to the question - how much does it cost to move a gas meter? Before we provide an answer for that, let’s look at what moving of a gas meter entails.

First and foremost, moving of a gas meter typically involves switching off the gas source to your home or property. The pipeline about 2 metres away from your property would be cut into for safety reasons and diverted into another position. Furthermore, you can as well apply that your meter should be re-fitted and re-linked to the inner copper pipeline, but that’s if the inner copper pipeline happens to be within two metres of the new location of your gas meter.

The time involved in the completion of a gas meter re-location project depends largely on the complexity of the job as each project is unique. Typically, the standard timescale from preparation to the final stage of moving a gas meter will take between 4 to 8 weeks. Finally, how much will it cost to relocate your gas meter?

As there are no government funds to subsidize gas meter relocation costs, this can be a very expensive work to carry out. Generally, the price to move a gas meter of about 5m will start within the range of £640 to £670.

With summer fast approaching, most business owners are getting ready to battle the great heat that often comes with it. One of the most important tasks would be to make sure that the commercial HVAC system is in top condition to run efficiently and smoothly through to help lessen or cancel out the effect of the summer’s heat in the work environment. Air conditioning systems when not properly maintained can take up to 30 percent energy which is capable of sending your utility bills through the roof during the season that calls for a heavy usage. In this post, we’re going to consider some top tips you can implement to prepare your commercial unit for summer air conditioning. Let’s take a look!

• Filter cleaning and maintenance. When the filter is clogged the cooling is decrease and more energy is consumed (implying higher electricity bills) as the unit works harder to have your work environment cooled. The filter accumulate dust, dirt and other particles pretty easily which also affects the indoor air quality since they’ll get pushed out with the cool air distributed. Therefore, there’s a need to ensure that the filters are washed regularly and also changed (at least once a month during summer).
• Air flow leaks and obstructions. If the blower components aren’t properly adjusted, this can lead to a 15 percent drop in the system’s efficiency. Also, gaps and obstructions in duct work can lower air flow in the HVAC unit. Therefore, you’ll need to check the ducts and connectors for loose spots or damages, also check walls, doors and windows for cracks and leaks which can allow the outside warmth to draft in and the cool air to flow out.