Find a Shop Fitter you can trust in Wickford.

There are two different types: flat plate, where lots of thin tubes carry water through a flat absorber panel, and evacuated tube, where vacuum glass tubes capture the sun’s energy directly. There is little difference in performance between the two but evacuated tube panels do more obviously extrude from the roof.

Solar PV panels work by converting sunlight into electricity. They’re made up of photovoltaic cells, which take in the sun’s rays and turn it into direct current (DC) electricity. The current is then channelled into an inverter, which converts it to alternating current (AC).

Once converted to AC, the electricity is ready to use. It’s fed through a meter and into your property’s consumer unit, and is automatically used to power appliances and heating systems. Your system will automatically switch between your solar electricity supply and the national grid, and export any solar electricity you don’t use to the national grid.

If you’re looking to purchase and install a solar system for your home or property, then knowing the amount of energy a solar panel can produce can go a long way to help you determine just how much solar panels that’ll be needed to power your entire house. In this article, we’ll give you an idea of the amount of energy that can be generated by a solar panel to help you make informed decisions going ahead.

First and foremost, you should note that each and every solar panel is rated by how much direct current power they’re able to generate under standard testing conditions. The output of a solar panel is given in watts units (W) and it stands for the theoretical power generation of the panel under direct sunlight as well as temperature conditions. Generally, several domestic solar panels possesses power output ratings which ranges from 250 watts to 400 watts. And as you would have expected, the higher power ratings are preferable when compared to the lower power ratings. What’s more? The total wattage of your solar panels will greatly influence a major part of your overall solar system cost.

Assuming you’re able to get just about 5 hours of direct sunlight every day, you can determine the output of your solar panel in this way - 5 hours x 290 watts ( wattage example of a premium solar panel) = 1450 watts-hours or approximately 1.5 kilowatts per hour (kWh). hence, the individual solar panel output in your array should be able to generate about 500 to 550 kWh of energy every year. This is sufficient energy to power some small appliances without problems.

Creating a comfortable and relaxing work environment for employees should be one of the top priorities of every organization. A comfortable work place serves as a morale booster, encourages the workers to be a lot more efficient and also productive. In fact, installation of a heating and cooling system in this day and age is more of a necessity than a luxury. To get the best out of your employees, it’s important to create a good working environment for them to thrive.

There are some business owners who believe the installation of an air conditioning system is an expense that’s really not necessary, but at the end of the day, they end up paying more money finding and implementing alternative means of getting their workers more efficient and productive. Here are some of the reasons why getting an air con system for your office is vital:

• It saves you money. This is one of the most significant benefits of getting a new office air conditioning system. When working in a conducive environment, employee’s productivity are greatly increased. So rather than spending money on other ways to boost the efficiency of your staff, installing a new office air conditioning system might be all that’s needed.
• It prevent overheating of office appliances. Stuffs like PCs, mobile phones and more can be spoilt when there’s too much heat. Installing an office air conditioning system will protect your office appliances from overheating.
• It increases the value of your property. The value of your commercial property can be increased by investing in a new office air conditioning system. In terms of sale, your real estate asset will be valued higher with a new office cooling system than the old one. However, if you’re not thinking about sales yet, then you can enjoy the several other benefits of a new cooling system while knowing the value of your property has increased.

There are all different types of Asbestos. Some kinds of asbestos, if they are in good condition, may be left as they are or covered up. If there is any danger of the asbestos being damaged and particles entering the air, it should be removed. Once a survey has been completed you will be advised on what course of action to take.

With the title of this blog, do not be deceived into thinking the purpose is to encourage you to install an external insulation by yourself. Even as a competent DIYer, it’s not advisable to buy a couple of materials and start slapping it into the wall hoping for the best outcome. External insulation is by no means a DIY job and without the proper training and experience, it can easily turn out disastrous resulting in loss of time, effort and money in such a valuable project. This blog, however, will give you a great insight on how the installation process works and help maximize knowledge ensuring you do not spend more than necessary.

External Insulation Installation

lRender Test

• This is done to ensure the existing render is good enough for insulation support.

• If positive, the insulation can be applied directly onto it.

• If negative, ensure removal of the old render before fitting the insulation.

lPipework Adjustment & Removal

• Remove all pipework prior to insulation fitting

• Install temporary downpipes to ensure water is not wasted and everything continue to function normally during the insulation fitting process.

lWindow Protection

• Protect the window with a protective layer or film.

lStarter Track Fitting

• Determine level you want the insulation to start (height).

• Fit the aluminium start track or carrier tray at the identified level.

lInsulation Boards Fitting

• Apply a layer of adhesive to the board and glue them to the wall in a staggered pattern.

• Cut to fit round all obstructions and windows.

• File off the edge of the board where necessary using a rasp upon successful fitting of the boards

lMechanical Fixing Inclusion

• Hammer around 10 fixings per square metre into the board.

• This is to secure the insulation boards.

lBeading Fitting

• Add corner beads and stop beads to ensure the insulation is secure and to prevent it from making contact with other materials.

lReinforcing Mesh & Render Addition

• Apply two layers of strengthening properties and between the two layers of render, include a fibre glass mesh.

lPrimer Application

• Paint on the primer

lFinal Render Application

• Choose your most preferred texture and colour as this will be the last coating of the installation process.

lPipework Re-installation

• Re-install all detached pipework at the start of the installation process.

There are a few reasons why commercial buildings often have flat roofs. Lots of people argue that flat roofs aren’t as attractive as pitched roofs, which is why it’s uncommon to see a residential property with an entirely flat roof. Lots of commercial buildings don’t need to look attractive, so go for flat roofs because they’re cheaper.

Flat roofs tend to be less expensive than pitched roofs, especially for large, broad commercial buildings. Some commercial buildings simply couldn’t have a pitched roof because their width would mean that the roof would have to be extremely high. Flat roofs are also cost-effective for commercial buildings because it means that air conditioning and ventilation units can go on the roof, saving space in and around the building.

Commercial buildings also often have flat roofs because they don’t need the loft space that residential properties need. If there’s no need for the space, it doesn’t make sense to spend more money on a pitched roof just to keep the attic space empty. Flat roofs also give the commercial building owner the opportunity to use the space as a smoking area for employees or give access to fire escapes to upper floors.

If you’re having a commercial property build, make sure you speak to the experts about the type of roof that is suitable for you. If you’re planning on having air conditioning or ventilation systems installed within the property, you might be best off with a flat roof – but if you need some extra storage space, a pitched roof might work best for you.

A garden room extension, also referred to as Sunroom or Solarium, is basically a stand alone garden building that’s totally detached from the home. They are typically semi-glazed building that features a tiled roof rather than glass. What would have been good examples of garden rooms extensions include conservatories, orangeries as well as pool houses, however they are constructed with the help of different materials and features which ultimately makes them different to garden rooms.

Garden room extensions are built with the major purpose of adding extra functional living spaces for a wide range of room options such as a second living room, dining room, study space, home garden office or a rehearsal space - the options are numerous. In other words if you’re looking for an additional usable space within your home or property, a garden room extension can be designed to suit your needs. So whether you need comfy sofas for evening relaxations, a sturdy office desk for work or large dining room table for dinners with family and friends, a garden room extension can be all that you need to achieve to your living space goals or just to add more value to your property.

Garden rooms extension has multiple alternatives such as a conservatory, garage conversion, loft conversion, extension and garden rooms. However, it has some great benefits over its alternatives. These benefits include, being very cost effective, hassle free, can be built within 5 to 9 days, rarely requires planning permission, does not require building regulations approval, includes a full professional installation and management without any need for subcontractors, modern and unique as well as being very versatile. Overall, if you’re looking to create an additional space in your home without having to break the bank, then garden room extensions may be your best bet.