Find a Shop Fitter you can trust in Aughnacloy.

Yes – solar panels do work in winter. Contrary to popular belief, solar panels can still work under daylight, even if it's not hot. Of course, they won’t generate as much electricity as they would during the summer months, as the days are shorter, but they will still generate electricity during those daylight hours.

Once you know how solar panels work, it’s easy to understand why solar panels work in the winter. Solar panels are made up of photovoltaic (PV) cells, which are units usually made out of silicon. These cells contain electrons that create energy when light hits them. The cell can then convert this energy into usable electric current and into your system to be used around the home.

Although it might seem strange, solar PV cells can actually work better when it’s cold. Too much heat around the cell can cause it to be inefficient, due to the difference in energy between the energy from the sunlight and the electrons in the solar cell. During cold weather, the difference between them is higher, so more

The higher the energy difference between the two sets of energy sources, the more power that the cell can produce when it’s struck by light. Of course, the downside is that there are fewer daylight hours in the winter, so you’ll still see a drop in energy production – but at least you know that your solar panels are still working efficiently. The other thing to bear in mind is that obstructions like snow and lots of cloud cover will impact the amount of electricity your solar panels will produce. Luckily the UK doesn’t get too much heavy snow, so any snow that does settle on the panels will melt quickly. As for cloud cover, even on exceptionally cloudy days your panels will still generate some electricity – just not as much as they would on a clear day.

How long it takes to install insulation will depend on the size of your property. In general, loft and cavity wall insulation can be installed in a day or two. External wall insulation will usually take longer to install. The rep or installer will be able to advise you when quoting for the job how long this will be.

If you’re planning to get a stair lift to be fitted in your home or property, one of the first things you’ll have to consider is whether your staircase is straight or curved as this would be the primary determinant of the stairlift type you’d go for. If you happen to have a curved staircase, you’d need to purchase a curved stairlift as only this can be fitted. Once you’ve identified the type of stair lift you need, then the next step is to determine the price to purchase and install such unit. In this post, we’re going to give you an idea of curved stairlift prices in order to help you make the best informed decisions possible. Let’s take a look!

Unfortunately, a quick and simple answer can’t be provided to this question as there are so many factors that influences the price of a curved stairlift. The bespoke nature of installing the necessary equipment is the main reason why the amount of new curved stairlifts greatly varies in the UK as well as the amount and complexity of the work required. For instance, if you purchase a curved stair lift with an intermediate landing, you’ll have to customize the track of the stair lift to fit your stairs which will make it a lot more expensive than ones without an intermediate landing.

With these in mind, providing an upfront and accurate estimate of a curved stairlift cost would be hard. As a result, this question can only be answered accurately taking into account all relevant factors by an expert after which they pay you a home visit. They’ll take into account whether  any existing fixtures and fitting will have to be removed or perhaps there’s a need for a custom feature to be installed and lots more.

1. Plan your shed base You must have a sturdy base for your shed, otherwise the frame won’t stand properly and could stop the door from opening. Decide whether you’re going to have:
   • A concrete base laid on hardcore
   • Concrete slabs on sharp sand
   • Treated wood beams on hardcore or shingle
   • An interlocking plastic system
   All bases should be laid on firm, level ground as far as possible.
2. Treat wood with preservative To help your shed last as long as possible, you should coat all the wooden parts with timber preservative before you put it together.
3. Put the shed floor together Some will need more assembly than others, but you need to make sure that the floor panel is attached to the joists; follow the manufacturer’s instructions for the correct spacing.
4. Put up the shed walls
   • Mark the centre point of each wall on its bottom edge, then do the same for the shed floor so you can line them up together.
   • Stand the gable end on the base and line it up. Check that it’s vertical with a spirit level – you might need someone to support the panel while you do this. Use a temporary holding batten to keep it in place.
   • Fix a side panel to the gable end panel with countersunk screws, then add the second side panel in the same way.
   Don’t attach the panels to the floor until you’ve fitted your shed roof.
5. Fit the roof
   • If the shed comes with a support bar, put this in position before you put the roof panels in.
   • Nail the roof panels in place, ensuring there’s a parallel and equal overlap at each end.
   • Roll out some roofing felt from front to back, leaving a 50mm overlap at each side. Secure it with clout-headed felt tacks at 100mm intervals.
   • Apply mastic sealant to the outside corners, then fix each corner trim with 30mm nails.
   • Add the fascias and finials, predrilling 2mm holes to avoid splitting the wood. Nail them through the felt into the shed using 40mm nails.
6. Add the shed windows
   • Slide each windowsill into the tongue and groove cut out, then put the window cover strip in position, fixing it to the vertical framing.
   • From inside the shed, put the glazing sheets into the window rebates, making sure the bottom edge of the glazing sheets sit on the outside of the sill.
   • Fix the window beading on the top and sides with 25mm nails.
7. Fix the walls to the floor Before you do anything, make sure you check that the centre marks on the walls line up with the marks on the shed floor. Then fix the wall panels to the floor with 50mm screws, aligning them with the joists.
And that’s it! But if you’re not confident in building a shed yourself, there are plenty of professionals available who will be happy to help.

Not if you don’t want to! The size of many appliances is standardised, meaning they should fit in to any new kitchen. Ask an experienced kitchen designer or installer if you’re not sure if your current appliances will fit into a new kitchen, and of course, new cupboards and worktops can be fitted around your existing appliances if you are keep them!

Double glazing frames don’t just have to come in uPVC and are available in other materials including aluminium and wood too. Wooden or timber windows are more suited to properties with a traditional look and are often the frame of choice for listed buildings and homes in conservation areas. When properly maintained wooden windows can last well for years but can be up to three times more expensive than uPVC.Aluminium is the strongest and most durable option. As a metal it is highly resistant to the UK’s changing weather conditions and won’t rust, warp, crack or peel. Aluminium offers a modern appeal and is available in a range of colours.

The quick and simple answer to this question is yes, upvc spraying is, in fact, largely beneficial! When it comes to helping your home or property rediscover its lost spark, upvc spraying is definitely a super convenient and effective solution you should consider. The drawback with UPVCs in general is the fact that they tend to get discoloured, scruffy or dull over time due to the elements as well as usage. In the previous years, when this occurs, the only option home and property owners had available to them was to replace the expensive upvc. However, good news is, you no longer have to go that length to have your home revitalized any more. With spray painting services for your home, you can easily achieve great results with little investment.

Using advanced technology as well as specially formulated paints, you can totally transform your home using just a fraction of the replacement cost within just a couple of days. If your upvc features appear to be quite unsightly and dull, spray painting can instantly improve their appearance while also enhancing the appearance of the whole property as well. Here are some of the benefits associated with spray painting:

• It helps you save money. Being an affordable alternative, spray painting upvc is about 75 percent cheaper when compared to the replacement cost.
• Improved appearance. This can instantly elevate the appearance of your home or make it an attractive choice for buyers if you wish to sell.
• Strengthen and protect. Using specially formulated paints and professional application, you can achieve long lasting and durable results.
• Finishing touch. There’s a variety of finishes you can opt for such as a satin, gloss or matt finish.

A retractable awning can be a great addition to the outside of your home or business. They fold or roll neatly into a cassette, so they don’t take up space when you don’t need them. Some have articulated arms, while others have telescopic arms.

When you get an awning, you can choose between a manual and an automatic one. Manual ones have a handle or crank that you wind to fold it in and out, while automatic ones have a motor.