Find a Shop Fitter you can trust in Ely.

A good way to get rid of your conservatory is to sell it. Depending on its condition you may not make much money from it, but it’s an easy and financially viable way to get your old conservatory dismantled and out of the way. If you are replacing it, the installer can easily remove this for you completely.

Replacement of roof tiles that have fractured, cracked or is missing is vital to avoid roof leaks and ceiling damage once rain and wind appear. Countering the problem swiftly by yourself is probable as long as it's only a few tiles. Charges for tile replacement can be expensive and fluctuate conditional on the company you hire.

The steps to replacing a tile are:

Ensure you have the right replacement tile as there are numerous different roof tiles on the market.

The most common types of roof tiles are concrete and terracotta. You must confirm that the tile is identical to your earlier tile or it may not work and can result in impairment even though you've tried to repair it. If you don't know what the tile is, ask the suggestion of a roofing supplier and they should be able to match it for you.

Get onto the roof.

It is only advisable to do this if the safety is guaranteed, using a steady ladder and maybe even using climbing ropes to protect you in case of a fall. If you don't possess a head for altitudes or you're sceptical about how safe it is for you to get on the roof, call in a professional.

Once you have securely gotten to the cracked tile, you'll want to somewhat lift the tiles that overlay the one to be detached. Do this by means of two pieces of timber to hold them up. Lift the broken tile over the baton with a brick trowel and gently slide it down.

Place your new tile on top of the brick trowel and inverse the steps to remove the tile.

Be certain to place the overlying tiles back into place.

Conduct a fast check across the roof to review any other possible damage. It is always advised to keep update on how the roof is holding out to keep an eye out for other tiles that might need replacing.

There are a number of providing circumstances where you might intend to have a structural engineer inspection executed to make sure that your properties bones are solid. We will certainly undergo a few of these shown below:

1. Selling your residence:

Many individuals think about working with a structural engineer when acquiring a property, however there additionally are many advantages when a seller uses a structural engineer.

For instance, if you are looking to sell your house in a prompt way, you may take into consideration having any areas of concern took a look at prior to putting your home on the market.

If you understand beforehand that your foundation is cracked, being aggressive with an engineer's structural inspection will provide your purchaser self-confidence to purchase as well as may speed up the closing procedure.

Long foundation cracks

You can additionally identify what problems are worth fixing or otherwise and can price your house accordingly.

If you know your home demands foundation work, you have the possibility to gather some quotes for the task. Having a strategy ahead of time can bring the vendor assurance and also enables a sensible sight of the sale price point.

Foundation repairs

Ensure that your structural engineer offers you with a written record portraying findings, as well as if required, a range of job that a service provider can use to finish the repair/correction job. The structural engineer record will likewise help get any called for building authorizations.

2. Purchasing a Residence

If you are buying a house, you may want to have a basic house survey carried out. This is not usually needed from home loan lenders, however is a good concept to get a total sight of the homes condition. Bear in mind, a home examiner will provide you a general condition report of the whole home.

If you uncover an anomaly with any of the weight bearing parts, they might be a "warning" and also advise a structural engineer survey for more investigation.

No – solar thermal doesn’t generate electricity. Unlike solar PV, solar thermal panels harness the sun’s energy and convert it into heat which is then transferred into your home.

You can have evacuated tube solar thermal panels or flat plate collectors; evacuated tubes are thought to be more efficient that flat plate collectors. They both work by using the sun’s rays to heat a transfer fluid, usually made from water and a type of antifreeze, which is pumped to a heat exchanger inside a water tank in your home. The heat from the exchanger heats the water inside your tank, then when the liquid releases its heat it’s transferred back to the collectors to start the whole process again.

You’ll need to use your solar thermal panel system with a boiler, collector or immersion heater. This is so that the water can be stored and used for your hot water and heating, and also because in the UK, people generally need to rely on another source of heating in the winter. There are fewer sunlight hours in the winter months, so it’s not often possible for solar thermal panels to generate enough heat from the sun to get your water up to temperature.

Whatever the time of year it is, you might want to heat the water up further than your solar panels can manage. That’s why you’ll still need a form of traditional hot water heating, but you should see savings on your energy bills. If you’re currently using natural gas, you can expect savings of around £60 per year on your fuel bills, while if you’re using LPG it could be as high as £100 pr year

How To Prepare Exterior Walls For Painting?

For a great and smooth exterior finish, preparing the walls before painting is crucial. A great painting job melts the heart and even more so if its done by you. This is a relatively easy task that can be completed without much hassle by an expert DIYer. However if you lack the needed confidence to pull off your exterior wall painting preparation task, then hiring the services of a reliable professional who can guarantee the best result would be your best bet. In this step by step, we aim to take you through the steps involved in preparing exterior walls for painting.

Before you get started, you need to make sure you have the necessary tools in place. These includes a filler and filling knife, sandpaper, soap, sponge, wide paint brush, masking tape as well as drop sheets.

✓ Ensure a smooth surface with a filer and sanding. This includes removing and replacing any rotten or decaying timer, proper sanding as needed, scraping off of peeling areas with sanding and filling of cracking areas with the help of exterior grade filler. Once the above is completed, you can then proceed to filling any holes or cracks in your exterior surface with a top quality exterior filler ( the application should be done with a putty knife).

✓ Cleaning. With the help of a quality and soft brush, clear out the dirt and cobwebs on the exterior’s surface. Then wash the walls with a good detergent to remove any remaining dirt and grease. You can use a bristled brush and a high pressure cleaner to make the process easier.

✓ Mask the area. This involves using a top quality masking tape along the edges you do not wish to paint and pushing the tape’s edges down firmly in such a way to get straight edges.

An engineered wooden door is a door made out of multiple pieces of wood. This is opposed to solid wooden doors that are made out of one piece of wood.Engineered wooden doors are usually covered by veneer to make them look like they are made from one piece of wood. They tend to be sturdier and straighter than solid doors.

If you are about to build a conservatory on your property, then chances are you’d want to know the types of repair that are common in a conservatory. We’ve been able to identify some type of issues which you’d most likely encounter if you happen to have a conservatory on your property.

First and foremost, most conservatories are built to be very tough and solid enough to withstand whatever is thrown at it by the weather, but over time they can still have their own share of problems just like any other erected structure. In other words, regardless of how well a conservatory is built or quality of the materials used, it’s still going to encounter some issues sooner or later. You can avoid some issue through regular upkeep and maintenance but there are some common issues you need to be aware of before investing in a new conservatory.

When it comes to conservatory repairs, wind and bad weather are the cause of most frequent issues to conservatory roofs as well as guttering which mostly results in repairs. This is because the roof is the most vulnerable part of any conservatory and that’s due to the fact that its the part that’s totally exposed to the elements. Here are some of the common issues you’re likely to come across with your conservatory roof that will need the attention of a professional.

The common problems includes leaking roof vents, slipped roof panels, warped and cracked gutters, broken end caps, misted or discoloured panels, leaks from poor flashing, blocked gutters, leaking gutters, snapped brackets, cracked panels and more.