Find a Shop Fitter you can trust in Coldstream.

Scarification is the name given to the process where you remove excess thatch and moss from your lawn to encourage it to grow and look healthy. Although it sounds difficult, it’s actually pretty easy – simply grab a sturdy rake and apply moderate pressure to rake out moss, thatch and dead grass. Then collect it up and add to your compost heap if you have one. You can also use a petrol or electric rake, but you just want to tease out the moss and thatch. Don’t be tempted to go deep into the grass, as this could damage your lawn. So when should you scarify your lawn? The experts say that the best time is in the autumn, when the grass is actively growing and it’s not too hot, cold or dry. Most of summer’s weed seeds will have gone, so you won’t encourage weeds to grow in the raked-up soil. This soil also makes an ideal seed bed for over seeding with new grass seed, so that’s why you don’t want to get weeds in there as well. However, you may also carry out light scarification in the spring – usually around April. Make sure you don’t go too far though – as you will end up with a rather disfigured lawn if you scarify too heavily and the dryness of summer stops the lawn from recovering. It’s also best to scarify your lawn in the spring if the following apply:

• If you couldn’t do it the previous autumn – if you keep putting it off, you might end up with extreme moss and weed growth
• If your lawn is shaded – these areas will thin over winter and start to thicken from spring onwards, so if you scarify in the autumn you’ll make your lawn even thinner.
• If your lawn is under trees – pair the shade from the trees with the fall of leaves in the autumn and your grass won’t be healthy, but in the spring the trees are bare, allowing lots of light onto your lawn to help it grow.

Working with a designer to plan your kitchen means you’ll get the best possible use out of the space and it maybe that wasted space can be put to good use. Designers can offer you lots of space saving solutions and innovative kitchen units, making your kitchen a truly functional area.

A patio is an outdoor space which can be used for a variety of stuffs which includes fun time with family and friends, reading time or just relaxing as the fresh breeze blows. With all these benefits and more, it’s becomes more obvious that there’s a need to keep your patio in a tip top condition at all times. If otherwise, you may not be able to enjoy your patio to your satisfaction and probably, for as long as you would want. You simply have to provide it with a regular maintenance which involves inspecting and identifying the damages that needs to be repaired before it gets out of hand. Fortunately, the minor repairs can be done by yourself if you’re confident enough. However, for bigger damages it’s advisable to call in a professional for help. In this article, we’ll take you through the patio reparation process.

✓ Prepare the area. This involves removing the problem piece gently and carefully. If there’s a piece you think can still be useful, store it in the re-use pile or you can start a new one. Once you’re done removing the pieces, the next thing to do would be to start removing anything that’s unwanted from the damaged area like debris, unwanted soil etc, and start sand fitting with some fresh sand. This should be levelled out to ensure there’s no bumps.

✓ With the sand down, you can start by putting the pieces back in together. This should be done gently to avoid any further damage. Do this until your patio

✓

Whether you’re going to hire a professional to create your concrete driveway or are trying DIY, it’s a good idea to know how to create one.

Firstly, make sure you’ve thought carefully about the size and location of your driveway, and mark it out with pegs and string. Then, you’ll need to dig out the area. Ideally this should be about 20cm deep – 10cm for the subbase and 10cm for the concrete layer. Make sure this is level and compress both the soil and the subbase with a compactor if needed.

Then, you’ll need to assemble the formwork for your driveway. These are pegged out planks of wood or metal that support the edges of your driveway while it’s setting. If your driveway is more than 4 metres long, you’ll also need to create control joints to allow the concrete to settle without cracking.

Once you’ve done this, you’re ready to pour on the concrete. You’ll need to level it and ideally give it some texture so the surface has some grip. Cover your concrete driveway with plastic sheeting when you’re happy with the finish and leave it to set. Make sure you don’t walk or drive on it until it’s completely set – this usually takes 3-10 days. Then, you can remove the framework and enjoy your new driveway.

There are many different types of extension. For example, you could install an orangery, flat or pitched roof extension, over-structure extension, single or double storey extension or a glass box extension. Which one of these is most suitable will depend on your existing property.

Is Asbestos Dangerous?

The short and simple answer to this question is yes, asbestos is absolutely dangerous. Exposure to asbestos fibres and dust can lead to cancer, lung disease and lots more. It’s known to be so dangerous that no level of exposure to asbestos is considered safe. It has been banned in the UK since 1999 but exposure is till rampant due to the exceptions to the ban and there’s a good chance that you’ll find it in several older buildings and homes. And despite the ban in most countries, asbestos related health issues are still on the rise across the globe. People that are mostly exposed to this risk are those who’re exposed on the job as well as those who simply like to take on projects around the house containing asbestos insulation by themselves.

Furthermore, there’s a need to observe safety precautions when working with asbestos. If not, you’ll be exposing both you and your family to long term health risks. Below are some of the things you need to know about the dangers of asbestos.

✓ Exposure to asbestos fibres has no safe level. So it’s best to avoid exposure at all costs.

✓ Breathing in asbestos dust can lead to lung cancer, asbestosis and mesothelioma.

✓ If disturbed, asbestos can release dangerous particles of dust containing asbestos fibres.

✓ Mesothelioma is a type of cancer which mostly affects the lung’s lining. It has no cure.

✓ If you smoke, then the risk of inhaling asbestos is greatly increased.

✓ The number of fibres inhaled as well as the length of time that you’ve been exposed to it increases the risk of contracting asbestos related diseases.

✓ The symptoms of asbestos dust related diseases do not commonly come out until its about 20 to 30 years after the first exposure.

Common reasons you may need a structural engineering inspection are

1. Bowing/cracked foundation
2. Settlement or wall cracks
3. To remove a wall in a remodel
4. Add solar panels to a roof
5. Add a second story to a home

Bifold doors are generally very low maintenance. They will only need infrequent cleaning and occasionally you may need to oil the track mechanism to ensure smooth opening. Speak to your installer and ask about general housekeeping and long lasting treatments.