Find a Shop Fitter you can trust in Kilbirnie.

In recent times, when about to purchase or renovate a building that was constructed before the 1980’s, most homeowners will be particular about knowing whether or not asbestos containing materials are present. Also when a property is being checked, a lot of individuals would want to know the peak years for asbestos to be used in homes.

Modern asbestos production started in the 1800s during the time of industrial revolution, but after some regulation were made to ban some asbestos products and uses in the late 1970’s, the production witnessed a significant drop. The United States was the foremost users of asbestos according to the USGS but this lasted until the 1960’s when it was overtaken by the Soviet Union. In this article, we’ll look at the years of use for asbestos containing materials like pipe insulation, vermiculite as well as wall systems.

✓ Insulation. Asbestos insulation was commonly used in homes with lots of focus on both piping and ductwork. This was started in the year 1908 but was ended between 1915 and 1920 by Air-Cell pipe insulation.

✓ Vermiculite. This refers to a mineral that’s popular for its insulating properties and mostly used as insulation for attics. It possesses a gold to brown kind of appearance and it’s also a pebble material that shimmers in the light. According to the EPA, if this material is suspected in a home it should be assumed to contain asbestos.

✓ Wall Systems. Plaster and drywall are very common wall types that are asbestos containing. And until asbestos was banned both wall systems are said to have asbestos. For example the drywall sheets as well as it’s joint compound both features asbestos from the 1930s to the 1980s.

There’s no doubt that weeds coming through your block paving can be unsightly and annoying. But, it’s relatively easy to get rid of weeds that are growing in the joints between your block paving. To start, pull out the larger weeds, and then you can use a pressure washer or firm bristled brush to remove the smaller weeds and debris from the joints in your block paving. It’s best to then refill the joints with additional sand to ensure your block paving remains level. Regularly brushing your block paving and treating with weed killer will help to prevent the weeds from reoccurring.

Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.

Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.

The vinyl material is a very popular flooring material preferred by several home and property owners as it happens to be slip resistant, easy to clean and also waterproof. As a result, this type of flooring is perfect in bathroom, kitchen and other high traffic areas within a home or property. Now, most home owners wonder whether or not it’s possible to use underfloor heating under vinyl floor. If you’re also looking for answers, then you’ve come to the right place! In this post, we’re going to consider the possibility of fitting underfloor heating under vinyl flooring.

The short and simple answer to this question is yes, you can safely use underfloor heating under vinyl flooring. A bunch of studies has been carried out by flooring experts to get a better insight on the effect of underfloor heating on vinyl floor’s physical and aesthetic appeal. It has been made known that there’s no shrinkage whatsoever or any form of impact on the physical appearance like discolouration and more. As a result, underfloor heating has no impact on vinyl flooring.

In order to ensure a perfect heat output, there’s the need to obtain a heat loss calculation when selecting a heating system. It’s always advisable to get an Energy Star approved programmable thermostat which offers you a full control of your property’s heating settings. It also enable you to live in a warm room when you want to without having to waste heat energy.

Generally, all wet underfloor heating systems are fitted on the structural sub floor. This implies that all products within thee wet system range can be incorporated safely with vinyl flooring.

Chimneys are certainly on top of the commonly overlooked features when it comes to cleaning a house. This is quite understandable given the fact that they’re not readily accessible and not in plain sight, hence, home and property owners tend to overlook the relevance of any chimney cleaning effort. But this can be a grave mistake! The importance of having your chimney swept on a regular basis cannot be over emphasized and even more so if it happens to be on a wood burner. Not only can a dirty chimney constitute fire hazard, but when left uncleaned it can also give rise to blockages which can lead to carbon monoxide poisoning. In fact, from 2014 to 2018, one of the top factors contributing to about 25% of home heating fires is due to lack of cleaning, mainly from solid-fueled heating equipment, mostly chimneys. Therefore, sweeping your chimney regularly is a safety precaution and when they happen to be on a wood burner, this exercise becomes a lot more important. With that in mind, the question that arises is just how often is sweeping of a chimney on a would burner needed?

Well, it’s strongly advisable to sweep chimney on a wood burner at least twice a year by a qualified professional depending on the usage. If you happen to own an oil burning fireplace, the same also applies. In other words, this means that regardless of the type of chimney you possess, the cleaning must be done regularly. However, most chimney would only need to be swept once in a year by a qualified professional.

As the name suggests, these are air conditioning units that are specifically designed to be installed indoors. Unlike the conventional air conditioning system which involves installing a rather unattractive box on the outside of the building, internal air conditioning units are full fledged AC system which doesn’t involve having to make penetrations through the external walls. This could be as a result of the weather proof nature of the building or any other exterior skin features which acts as a restriction and makes the installation of a traditional air conditioning unit on the outside of your building simply illogical.

So how exactly does internal air conditioning units work? Well, most systems features the following components:

• The fan coil or room unit which is retrofitted high up on the interior wall of the room in question. Although, it can also be fitted into existing fittings as a concealed ducted unit during a refurbishment which makes it look a lot more attractive than the first option.
• The refrigeration pipe work then runs from the unit hidden behind the walls or ceilings, to the condenser box. The condenser box is usually the part that goes outside. However, it’s still installed inside the systems, mostly in a concealed space such as under the kitchen counter.

The benefits of installing internal air conditioning systems include the following:

• They are smart systems which is fully controllable with WiFi
• They filter the air, sucking dust, pollutants as well as other allergens from your building
• They most possesses some exciting features like the blackout technology as well as the i-Feel temperature control
• They’re just as effective in cooling and dehumidifying as any traditional air conditioning system.

How To Dispose Of Asbestos?

As a homeowner, you certainly wouldn’t like to the word “asbestos” and understandably so. Due to its extremely dangerous fibres, the material was banned in the UK since 1999 and any structure built with it will be heavily fined. However, if you’re presently doing some home improvement project or buying a property that was built before the year 2000, then a chance exists that the property could contain asbestos. So if you’re unlucky to discover asbestos in your property, getting rid of it can be quite simple if you know way around it. In this article, we’ll provide you with some tips on how to dispose of asbestos in your property. Let’s take a closer look!

✓ Careful Handling

If you happen to find asbestos in your property the best thing to do is to call in a reliable specialist who has the proper training and equipment to tackle the project. However, if you decide to handle it yourself, then it’s a must to do this with great care. For instance wearing safety gloves, dust mask, safety goggles and placement of asbestos into plastic bags would be a great idea.

✓ Take It To The Tip By Yourself

To save some money if you have access to a vehicle, then loading the bagged asbestos into your car and driving it to the nearest local tip would be a simple and cost effective alternative. However, you should check with your local authorities before attempting this.

✓ Use A Specialist

Hiring a professional asbestos removal contractor is simply the best way to dispose of asbestos. Their services may be a bit expensive, but they cover up for that in both speed and effectiveness.

✓ Use Your Council’s Asbestos Collection Service

Several councils off this services at a reduced cost. However, they are usually not as quick as a specialist contractor.