Find a Shop Fitter you can trust in Dundee.

How to repair a flat roof depends on the type of flat roof you have. We’ll talk about how to repair felt, asphalt, fibreglass and EDPM flat roofs yourself. But ultimately if you want the best finish, it’s best to ask a professional to repair your flat roof for you. Repairing a flat roof Whether you’ve got an old pour-and-roll type felt roof or a newer torch-on felt flat roof, you can get cracks, lifting around joints, leaks or dips. As a temporary measure, you can buy a special paint that you paint over cracks. For a more permanent repair, you can add a patch of torched-on felt or add a layer on top. Asphalt flat roof repair As your asphalt flat roof gets older, you may notice blisters, cracks or shrinkage and sagging around flashings. Again, you can use a paint on fix from a tin as a temporary repair, or add heat-applied flashing tape around flashing. For a more permanent fix you can use a liquid system, but many are only available to the trade market. You can also add a patch of torched-on roofing felt over a crack. How to repair a fibreglass (GRP) flat roof Fibreglass flat roofs are usually excellent, but problems can involve leaking flashing and cracks near upstands, trims or board joints. You can add acrylic sealant to cracks or holes for a good DIY repair, but a flashing problem is more difficult to fix. You’ll need to clean and sand the affected area of flashing, then laminate a 600g chopped strand mat into place, cure it and add a topcoat colour to match the roof. That sounds like a job better left to a specialist. EDPM rubber flat roof repair Rubber roofs often suffer from shrinkage when mechanical fixings haven’t been used near upstands, flashing leaks or holes or cuts. If you’ve got a small tear that you want to repair, you can add some lap sealant to the area – but use it sparingly. For a more permanent repair to flashing, buy some self-adhesive flashing that will mould into shape easily. Clean the area you want to repair, add EDPM primer, then stick the patch of flashing on from the centre outwards with a hard roller. You can add lap sealant around the edges if you want more protection from water.

Why Do Roof Tiles Slip?

Despite being our first line of defence against the elements and covering the most valuable assets we possess, it’s shocking the reason why most roofs go unnoticed for years. However, when a damp patch suddenly appears on the ceiling or water starts to leak into our home, the condition of our roofing suddenly becomes of huge importance to homeowners.

In the UK, we get a fair share of harsh wind and heavy rainfall across the year which over time can lead to a plethora of roofing issues. One of the most obvious to identify is when roof tiles slip. If you’re also facing the same challenge, then you’ll most likely be interested in knowing the reason behind this occurrence. In this article, we’re going to take a look at some of the reasons why roof tiles slip.

Roof tiles can slip as a result of a corrosion of the nails that’s in place to secure your tiles to your roof. This happens especially during strong storms, whereby several roof tiles can be dislodged by rain and winds. If the affected tiles are just a few, then it may actually be a little issue to resolve. However, there are also times that the tiles slippage can be caused by a more serious issue. What’s more? You can also discover slipped roof tiles if the wood of your roof is corroded or weak. However, this applies a lot more to older homes than new or recent constructions. Any of the above reasons may be the main cause of your roof tiles slippage, but if you really want to know the exact cause for sure, you’ll have to call in a professional roof company to inspect your home.

Laying of bricks is a skilful trade which requires the bricklayer to fully understand the process involved in the required building material preparation necessary to construct a foundation as well as to mix the concrete or mortar. As a tradesperson, you also need to fully comprehend how to make use of various materials and master the art of shaping, polishing and cutting it. A typical bricklaying endeavour is expected to include different activities such as preparation of the surface, assembly, installation, reinforcement as well as repair.

As a result, every aspect of the job demands an in depth and extensive knowledge, skills and also experience. To get started in this career path, you can also consider getting a bricklaying license as this will stand you out from the lots from your customer’s point of view. However, to obtain a bricklaying license, you’ll need to have some qualifications which includes an industry experience in the field as well as a trade certificate. These formal and nationally recognized qualifications can be gotten through the Recognition of Prior Learning.

It must, however, be said that several states will require either a building practitioner registration or a bricklaying license to enable you practice as a professional bricklayer in order to ensure that the national standards for quality is always met. In other states, a bricklayer must meet some certain registration requirements or possess concrete licenses. Some will necessitate that you register as a building practitioner to take on certain projects but only to a particular level.

Overall, a bricklaying license will help you meet the building commission’s requirements so as to avoid stern punishments like fines and sanctions. It also allows you to sign legal contracts and agreements, market your services and lots more to steer ahead of competition in the industry.

How Much Is A Locksmith?

If you’ve ever been locked out of your home or car, then you probably know how frustrating the experience can be. And even more so, when you don’t have a spare key kept somewhere. In this kind of scenario, a professional locksmith is your best bet to help in this type of bind and lots more. So exactly how much is the average cost of hiring a locksmith? This article will help you shed more light on this as well as the factors influencing the amount you may need to pay.

Locksmith provides a wide range of services including replacing your existing lock, installing a new lock system as well as re-keying a lock for a house or car. The services may also encompass installing garage door locks, repair damaged locks for doors and lots more. Depending of the locksmith service you require, the price of a locksmith can range between £65 to £90. For instance, if you happen to be locked out of your house, you may have to pay up to £70 to £80 and could even be higher or lower depending on the location, the lock’s type as well as the time of the day. Furthermore, if you wish to completely change the lock, this will cost you above £65 or more. You’ll discover the starting price list for each service of most locksmith companies on their websites.

To provide their service, a professional locksmith company will have to visit your location to help change the lock on your car, at home or in the office. Therefore, the minimum service fee your locksmith will charge will include factors such as travel fees. Generally, the minimum service fee to visit your home will fall within the range of £65 to £90. However, if your call comes in during the company’s off hours, you may have to pay more than the usual.

After making the decision to refurbish your home or property, the next obvious step is finding the right builder to get the job done. The process of getting a good and reliable builder can be a very tricky one especially when you don’t plan ahead. And in truth, the outcome of your house refurbishment project can only be as good as the contractor your hire. Consequently, finding the perfect builder for your task should be a top priority to get the best return on investment. Here are a few sources that will put you in the right direction to finding a reliable home refurbishment company.

✓ Friends, Relatives & Neighbours

If you have a friend, relative or neighbour that have recently completed a home refurbishment project, you can go for a visit to check out the work done. If you’re pleased with the work, you can proceed to ask about the work ethics of the builder and get the contact if satisfied.

✓ Internet

With the rapid rise of online technology, there’s hardly a service you can’t find on the internet. Websites like HomeAdvisor have been helping people find their desired service providers with relative ease for so long. To get the right building contractor online, it’s advisable to check reviews as well as testimonials before moving forward. Nowadays, you’re most likely going to find so many positive online reviews as some businesses now go to the extent of dubiously writing good reviews for their companies. As a result, it’s recommended to pay closer attention to the negative reviews and check if it’s something you can cope with before hiring a contractor.

✓ Store Contact Lists

You’ll discover a long list of building contractors on several stores trading building materials. These builders may not be affiliated with the store owners, but many stores see it as their responsibility to point you in the right direction so that the building materials acquired from them can be put to good use.

If you’re looking to purchase and install an air conditioning system in your home or property, what immediately comes to mind is the type to invest in. When it comes to air conditioners, the available choices are numerous - from window units to central air conditioning, through-the-wall air conditioners, portable air conditioners, ductless split system, package terminal air conditioners, swamp coolers as well as geothermal cooling systems. In this post, we’re going to consider the various type of air conditioners in order to help you make the best decision moving forward. Let’s take a look!

• Window air conditioners. These are the most popular type of air conditioners which are typically mounted in a window. They possess an exhaust system which pushes hot air out the back and sides while the refrigerant cooling is pointed indoors.
• Central air conditioning. This is the most effective form of air conditioning if you happen to own a large home and want all rooms cooled at once.
• Portable air conditioners. Just like window air conditioners, these are self-contained air conditioning systems. In other words, portable air conditioners have all their essential components in one appliance just like in window air conditioning units.
• Through-the-wall air conditioners. These self-contained units that operates by bringing in warm air which is then exhausted while they send cool air back into the room ( similar to window air conditioners).
• Ductless split system air conditioners. Just like the name suggests, these are two-part air conditioners that are able to cool various areas within a home.
• Package terminal air conditioners. These are the type of air conditioners that are mostly used for cooling in commercial spaces like hospitals, hotels and the likes.
• Evaporative or “swamp” coolers. Although these aren’t as common as refrigerant air conditioners but they are just as effective. While conventional air conditioners make use of a refrigerant known as Freon, swamp coolers only incorporates air and water to function.

When you think about installing an electric garage door, one thing that naturally comes to mind is that purchasing and fitting of an electric garage door would be an expensive luxury. Having a garage door controlled by a remote control will probably cost too much, right? Well, contrary to many beliefs, the average cost of an electric garage door in the UK isn’t as expensive or pricey as you would have earlier imagined it to be. Of course, the price of your new electric garage door depends on a wide variety of factors such as the type of garage you possess, its aperture, construction as well as the type of electric garage door you seek.

Electric garage door aren’t that expensive considering the protection and convenience they provide, making them a viable option that should be considered for your garage. In the UK, a steel up-and-over single garage door price ranges around £700 to £900 plus £150 to £250 installation fee. Whereas, a costly single timber, trackless overlap door can cost as much as £4,200 to £5000 with about £400 to £700 installation price. A double garage door will usually cost double the price to purchase with just a little increase in the cost of the fittings.

The convenience provided in using an electric garage door is one of the main reasons why most people would prefer fitting it in their house. Just the thought of arriving home and driving through the wall of your garage with just a click of a button and without having to leave the comfort of your vehicle can be very appealing. And also with a click of a button you can keep your garage safe and secure from any potential danger. At the end of the day, the convenience and other benefits that comes with an electric garage door largely outweighs the price involved.

Asbestos fibres are very small, so they’re not possible to identify with the naked eye. However, they’re common in particular materials of a certain age, so you can work out if there are any parts of a building that are likely to contain asbestos.

Start by checking the date that the material you suspect contains asbestos was installed. If it was in 2000 or after then you don’t need to worry, it definitely doesn’t contain asbestos. However, if it was fitted before 2000 it may contain asbestos, particularly if this was between 1940 and 1980.

Materials that used to commonly contain asbestos include ceiling tiles, guttering, soffits, fascia, external cladding and facades, vinyl flooring, artex, cement roofs and insulation.