Find a Security Specialist you can trust in West Glamorgan.

There are a wide array of smart ring doorbells available in the market today and all coming with detailed installation instructions. Here, we’ll make it clearer to enable you get it done right, the right time and with little stress. With a properly installed ring video doorbell, you’ll be able to identify who’s at the door before opening and even chat with them via your table, PC or Smartphone. And to make it even more interesting, you can easily install a ring doorbell yourself and save some money.

Installation Steps

• Assemble the mounting bracket

Bring out the mounting bracket that comes with your ring video doorbell. You’ll discover a small level within the mounting bracket, put this on the bracket’s slot. Once done, gently line it up to the spot where you want to place your doorbell.

• Determine the pilot holes

Firstly, ensure the bubble found in the level is straight. Then, mark out where the screws will go through.

• Drill the identified pilot hole spots

When drilling, you’ll need not just your drill and drill bit (or a masonry bit, if its a brick), but also your eye and ear protection. Drill the marked out spots to create pilot holes and subsequently hammer in the plastic anchors that comes in the ring doorbell’s pack to help hold your screws in place. Once done, put the bracket on the top and tighten your screws.

• Scan the QR Code

With the use of your phone, scan the special QR code given behind your doorbell to ensure the ring doorbell is only accessible by you and your loved ones.

• Secure the doorbell

Ensure that the bracket is properly in place and attach your doorbell to the mounting bracket. Once done, you can make it safe by using smaller security screws to hold it. Upon completion, your ring doorbell is ready for use - it’s that easy!

Home security alarms discharge their duties following a simple concept - ensuring all entry points into the building are secured. This is done through the placement of sensors at all possible points of entry. These sensors, in turn, detects all possible breach in security and relays the information to either the control panel or the command centre situated somewhere in the building.

The usual spots where the sensors are installed includes the doors, windows (especially the easily accessible ones at the ground level) and any other possible entrance into and from a house. Meanwhile, motion sensors can also be incorporated to secure the open spaces inside the home.

Here are the important components of a home security alarm:

• The Control Panel. This basically controls the entire security system. It can activate or deactivate the alarm by communicating with all installed components. In the event whereby there is an intrusion, it automatically triggers the alarm and raises the awareness of an alarm monitoring company. It normally comes with a touchpad which allows for easy interaction and settings to activate/deactivate the alarm system. The control panel can also operate on voice commands and can be set to work using key fobs (also known as wireless remote controls).

• Door & Window Sensors. These comprises two parts which are to be placed in adjacent positions to each other - on the door/window and the door frame or window sill to generate a security circuit when the door/window is shut.

• Motion Sensors. These sensors are used to protect an open space which cannot be breached without the alarm going off.

• Surveillance Cameras. Think of them as the ‘eyes’ monitoring the secured zone. They come in both wired and wireless configurations and can be remotely accessed on Smartphones, Tablets and PCs.

• High-Decibel Alarm. Alarms often serve two great functions. They are often loud enough to alert both occupants and nearby neighbours, but also shrill enough to send the intruder running.

• Yard Sign & Window Stickers. They may actually act as a marketing medium for alarm companies, but they are also sending an indirect message to potential intruders telling them to reconsider their intended illegal activity as the property is professionally protected. Click on the link to learn more about home security alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.

Modern wireless alarm systems are as reliable as wired systems. Wireless systems can transmit alerts as quickly and reliably as wired systems. They are also suitable for installation in more places as there does not need to be space to hide the wires.

Visible alarm systems can deter burglars. There are a range of options for what happens when an alarm is triggered. For example, there are bells only, alarm receiving centre, and homeowner monitored alarms. These are all effective as deterrence methods, and which you choose will depend on your specific needs.

Various studies have suggested that CCTV is an effective deterrent against home burglaries. In the event that a crime is committed on your property, well placed CCTV means you’ll have the evidence to help the police. It has been recorded consistantly that since CCTV systems have been installed, localised crime has fallen and has lead to more arrests.

Network enabled/IP cameras are digital CCTV cameras. With these cameras, the video captured can be streamed over the internet anywhere in the world. Most manufacturers of IP cameras have a smartphone app that allows you to watch the video feed on your phone.

According to several studies and survey of ex-burglars, a home or building is less likely to be burgled with the availability of properly functioning and well fitted burglar alarm system. So if you’re thinking about installing one in your house, you can as well make sure you get the best possible burglar alarm that’s just right for your home. Several people asks the question of the best burglar alarm, but the fact is, it all depends on a number of factors such as your budget, personal preferences, your location, home features as well as the protection and response level you require. To put you in the right direction to make the best choice, here’s a breakdown of the types of burglar alarm systems to help you determine the one that will best suit your home.

lBells-Only Alarms

This makes a loud sound but that’s as far as it goes. It will not contact anyone.

Pros

• No monitoring contract and payment

• Easy to install

Cons

• It does not contact anyone.

• It may not deter the burglars if there’s no one around to stop the intrusion.

lDialler Burglar Alarms

This contacts your phone or any other numbers nominated once the alarm is triggered.

Pros

• No monitoring contract and payment.

• Nominated numbers would be dialled

• It can also notify you of other dangers such as fire if extra sensors are acquired.

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• Nominated numbers may be unavailable when dialled.

lSmart home security system

This contacts your or your loved ones whenever the alarm is triggered via a Smartphone or tablet application.

Pros

• Notifies you when away from home

• Can be monitored and controlled from a Smartphone

Cons

• If you opt for a GSM dialler, a weak mobile network can affect its effectiveness

• They can be expensive depending on your selected elements

lA monitoring contract

This implies paying a monthly or annual fee to a company to act or notify the police the your alarm is triggered

Pros

• The monitoring company is in hand to act in order to prevent the potential burglary and liable if it doesn’t.

• Some of the companies also offer maintenance services

Cons

• Expensive

• It cannot be installed by yourself

Click here to learn more about burglar alarms.