Find a Security Specialist you can trust in South East.

Properly installed and calibrated alarm systems will very rarely trigger a false alarm. If you have pets you will need to use pet-friendly alarm systems. External sensors should be properly calibrated to avoid triggering in the wind or rain. NSI is a recognised standard for all alarm installations, check the NSI flag is displayed on an installers credentials.

Most cameras have a night mode to capture video in the dark. They use an infrared sensor to detect infrared light. These pictures are black and white, but still retain plenty of detail. Cameras are also able to see and record in adverse conditions such as fog, dust and smoke.

The type of camera that will be most effective will vary depending on the space you would like to monitor as well as the specific location. Professional CCTV installation companies can carry out a survey of your property and identify the key areas to monitor.

Given the poor reputation of wireless alarm systems over time for being largely unreliable, it’s no surprise many potential investors are curious to know how wise a wireless alarm system purchase decision is. The main issue with the older models is the fact that they possess an inadequate monitoring capabilities as well as receiving range which makes it hard to detect signals of intrusion or potential failures. Hence, this makes the older wireless models totally unreliable.

However, the immense improvement in the wireless technology has ultimately made the newer versions a lot more reliable. Although, in rare cases, they might be affected by some interferences which can result in the malfunctioning of the sensors. Overall, with proper care and maintenance, wireless alarms can be just as reliable as the wired alarms.

Here are some of the advantages of using wireless alarms:

• Due to the little amount of wirings incorporated, a wireless system is significantly neater than the wired system.

• They are very easier to install and consumes little time

• Wireless alarm systems are highly flexible. To expand your system, you can include door or window sensors and motion sensors.

• The system’s security options enables the connection of smart devices to your alarm via a network connection. As a result, you can easily activate or deactivate your alarm and get alarm notifications via your Smartphone.

• They are very portable. This implies you can always carry your alarm with you if you ever decide to relocate.

• You get to benefit from systems with a key fob and other wireless-enabled features.

• Wireless alarms are user-friendly, making it very easy and quick to install and set up.

With the above mentioned points, you can be rest assured that a wireless alarm is now more secured than ever and a good option if you wish to install a home security system.

There are several advantages that comes with owning an electric gate such as the ability to close your gate with little to no effort. The list goes on, but one of the major reasons of having a gate installed is the security it provides. Several homeowners are not quite sure if electric gate can offer the much-needed security for their property. If you also have the same concern, then you’ve come to the right place! In this post, we aim to provide you with an insight into electric gates and their security so as to help you make the best decision moving forward. Let’s take a look!

First and foremost, if your electric gate is well boarded, they’re able to provide a level of privacy as no one will be able to see through them.  Asides this, the also represent a physical boundary – an extension of the walls or hedges that surrounds your property. With this, no one can simply walk over your drive or have any sort of access to your home or garden without having to take some sort of risk. Anyone who want to come onto your property would already be detected before ring the bell or arrive at your front door. Using audio or video intercoms, you’ll either hear or see who is at your gate and decide who gets to come in and who doesn’t.

What if someone wants to force their way onto your property by ramming your gates with a van, are electric gates strong enough to hinder them? Well, it’s very unlikely that they will as anyone applying force on swing gates that quite far from the hinges has leverage on their side. With a magnetic lock at the opening edges and ground latches, you can reinforce your gate. However, a lot of force from a vehicle with multiple horsepower multiplied greatly by the benefits of the leverage.

There are a wide array of smart ring doorbells available in the market today and all coming with detailed installation instructions. Here, we’ll make it clearer to enable you get it done right, the right time and with little stress. With a properly installed ring video doorbell, you’ll be able to identify who’s at the door before opening and even chat with them via your table, PC or Smartphone. And to make it even more interesting, you can easily install a ring doorbell yourself and save some money.

Installation Steps

• Assemble the mounting bracket

Bring out the mounting bracket that comes with your ring video doorbell. You’ll discover a small level within the mounting bracket, put this on the bracket’s slot. Once done, gently line it up to the spot where you want to place your doorbell.

• Determine the pilot holes

Firstly, ensure the bubble found in the level is straight. Then, mark out where the screws will go through.

• Drill the identified pilot hole spots

When drilling, you’ll need not just your drill and drill bit (or a masonry bit, if its a brick), but also your eye and ear protection. Drill the marked out spots to create pilot holes and subsequently hammer in the plastic anchors that comes in the ring doorbell’s pack to help hold your screws in place. Once done, put the bracket on the top and tighten your screws.

• Scan the QR Code

With the use of your phone, scan the special QR code given behind your doorbell to ensure the ring doorbell is only accessible by you and your loved ones.

• Secure the doorbell

Ensure that the bracket is properly in place and attach your doorbell to the mounting bracket. Once done, you can make it safe by using smaller security screws to hold it. Upon completion, your ring doorbell is ready for use - it’s that easy!

The cost differs greatly relying on the size and intricacy of the alarm system. A basic system can include simply one PIR sensor per area to normally cover the space.

An even more robust as well as delicate system you could have vibration sensing units fitted to the windows on the downstairs. You can link outside lighting, safety and security entrances and all type of exterior controls right into the alarm system. A straightforward professional alarm system installer will have the ability to review your demands and suggest the correct method to safeguard your residential property.

Watch out for installing a Do It Yourself alarm these are created to be easy systems as well as easy to set up. They can simply be unplugged and deactivated quickly by any kind of ready crook. They additionally call for batteries to be changed consistently. If the batteries in the sensing units run out this will certainly imply that the system will not be securing your home appropriately.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.