Find a Security Specialist you can trust in Crieff.

Various studies have suggested that CCTV is an effective deterrent against home burglaries. In the event that a crime is committed on your property, well placed CCTV means you’ll have the evidence to help the police. It has been recorded consistantly that since CCTV systems have been installed, localised crime has fallen and has lead to more arrests.

Network enabled/IP cameras are digital CCTV cameras. With these cameras, the video captured can be streamed over the internet anywhere in the world. Most manufacturers of IP cameras have a smartphone app that allows you to watch the video feed on your phone.

There are a wide array of smart ring doorbells available in the market today and all coming with detailed installation instructions. Here, we’ll make it clearer to enable you get it done right, the right time and with little stress. With a properly installed ring video doorbell, you’ll be able to identify who’s at the door before opening and even chat with them via your table, PC or Smartphone. And to make it even more interesting, you can easily install a ring doorbell yourself and save some money.

Installation Steps

• Assemble the mounting bracket

Bring out the mounting bracket that comes with your ring video doorbell. You’ll discover a small level within the mounting bracket, put this on the bracket’s slot. Once done, gently line it up to the spot where you want to place your doorbell.

• Determine the pilot holes

Firstly, ensure the bubble found in the level is straight. Then, mark out where the screws will go through.

• Drill the identified pilot hole spots

When drilling, you’ll need not just your drill and drill bit (or a masonry bit, if its a brick), but also your eye and ear protection. Drill the marked out spots to create pilot holes and subsequently hammer in the plastic anchors that comes in the ring doorbell’s pack to help hold your screws in place. Once done, put the bracket on the top and tighten your screws.

• Scan the QR Code

With the use of your phone, scan the special QR code given behind your doorbell to ensure the ring doorbell is only accessible by you and your loved ones.

• Secure the doorbell

Ensure that the bracket is properly in place and attach your doorbell to the mounting bracket. Once done, you can make it safe by using smaller security screws to hold it. Upon completion, your ring doorbell is ready for use - it’s that easy!

Home security alarms discharge their duties following a simple concept - ensuring all entry points into the building are secured. This is done through the placement of sensors at all possible points of entry. These sensors, in turn, detects all possible breach in security and relays the information to either the control panel or the command centre situated somewhere in the building.

The usual spots where the sensors are installed includes the doors, windows (especially the easily accessible ones at the ground level) and any other possible entrance into and from a house. Meanwhile, motion sensors can also be incorporated to secure the open spaces inside the home.

Here are the important components of a home security alarm:

• The Control Panel. This basically controls the entire security system. It can activate or deactivate the alarm by communicating with all installed components. In the event whereby there is an intrusion, it automatically triggers the alarm and raises the awareness of an alarm monitoring company. It normally comes with a touchpad which allows for easy interaction and settings to activate/deactivate the alarm system. The control panel can also operate on voice commands and can be set to work using key fobs (also known as wireless remote controls).

• Door & Window Sensors. These comprises two parts which are to be placed in adjacent positions to each other - on the door/window and the door frame or window sill to generate a security circuit when the door/window is shut.

• Motion Sensors. These sensors are used to protect an open space which cannot be breached without the alarm going off.

• Surveillance Cameras. Think of them as the ‘eyes’ monitoring the secured zone. They come in both wired and wireless configurations and can be remotely accessed on Smartphones, Tablets and PCs.

• High-Decibel Alarm. Alarms often serve two great functions. They are often loud enough to alert both occupants and nearby neighbours, but also shrill enough to send the intruder running.

• Yard Sign & Window Stickers. They may actually act as a marketing medium for alarm companies, but they are also sending an indirect message to potential intruders telling them to reconsider their intended illegal activity as the property is professionally protected. Click on the link to learn more about home security alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/

Given the poor reputation of wireless alarm systems over time for being largely unreliable, it’s no surprise many potential investors are curious to know how wise a wireless alarm system purchase decision is. The main issue with the older models is the fact that they possess an inadequate monitoring capabilities as well as receiving range which makes it hard to detect signals of intrusion or potential failures. Hence, this makes the older wireless models totally unreliable.

However, the immense improvement in the wireless technology has ultimately made the newer versions a lot more reliable. Although, in rare cases, they might be affected by some interferences which can result in the malfunctioning of the sensors. Overall, with proper care and maintenance, wireless alarms can be just as reliable as the wired alarms.

Here are some of the advantages of using wireless alarms:

• Due to the little amount of wirings incorporated, a wireless system is significantly neater than the wired system.

• They are very easier to install and consumes little time

• Wireless alarm systems are highly flexible. To expand your system, you can include door or window sensors and motion sensors.

• The system’s security options enables the connection of smart devices to your alarm via a network connection. As a result, you can easily activate or deactivate your alarm and get alarm notifications via your Smartphone.

• They are very portable. This implies you can always carry your alarm with you if you ever decide to relocate.

• You get to benefit from systems with a key fob and other wireless-enabled features.

• Wireless alarms are user-friendly, making it very easy and quick to install and set up.

With the above mentioned points, you can be rest assured that a wireless alarm is now more secured than ever and a good option if you wish to install a home security system.

The number of sensors you need will depend on the size of your home. Most alarm systems feature 2-4 passive infrared sensors (PIRs) for motion detection, and 2-4 magnetic contact sensors on doors and windows. An alarm company will advise you of how many your property will need upon an inspecton.

What Is The Best Security Alarm System For Home?

Do you know you do not have to break the bank to secure your home and achieve peace of mind? Conventional home security systems generally require costly pro installation alongside extensive contracts. However with the advent of the smart versions, you can save a lot of money through personal installation and opting out of a monitoring plan if you deem fit.

If you are thinking about installing the best security alarm system in your home, there are a couple of factors you should take into account. These includes the ability to control the system remotely, wired or wireless system, motion detectors and video cameras. Across the series of home security systems we’ve tested and reviewed, SimpliSafe happens to be the most easy-to-use and install, reliable, affordable and well detailed. What’s more? It doesn’t seek to tie you down with a monitoring plan as you can choose to opt in/out at anytime.

Discover The SimpliSafe Difference!

As a user-friendly DIY security alarm system, SimpliSafe is right on top of the lot with several amazing features designed to improve security while also enhancing your comfort. The add-ons include a doorbell camera, smart lock, interior video camera as well as sensors. The system offers a 24/7 live-monitoring fees that are affordable and also highly competitive. However, a con of the system includes the lack of self-monitoring options or outdoor cameras. This implies that if you’re not subscribed to any monitoring plan, the security alarm system will only be able to operate locally. Also, it can be used with August locks, which represents the only non-SimpliSafe device compatible with the system. Overall, SimpliSafe is simply the best option available in the market mainly due to its impressive selection of add-ons, affordability, as well as its simplicity.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.