Find a Security Specialist you can trust in Dursley.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.

Home security alarms discharge their duties following a simple concept - ensuring all entry points into the building are secured. This is done through the placement of sensors at all possible points of entry. These sensors, in turn, detects all possible breach in security and relays the information to either the control panel or the command centre situated somewhere in the building.

The usual spots where the sensors are installed includes the doors, windows (especially the easily accessible ones at the ground level) and any other possible entrance into and from a house. Meanwhile, motion sensors can also be incorporated to secure the open spaces inside the home.

Here are the important components of a home security alarm:

• The Control Panel. This basically controls the entire security system. It can activate or deactivate the alarm by communicating with all installed components. In the event whereby there is an intrusion, it automatically triggers the alarm and raises the awareness of an alarm monitoring company. It normally comes with a touchpad which allows for easy interaction and settings to activate/deactivate the alarm system. The control panel can also operate on voice commands and can be set to work using key fobs (also known as wireless remote controls).

• Door & Window Sensors. These comprises two parts which are to be placed in adjacent positions to each other - on the door/window and the door frame or window sill to generate a security circuit when the door/window is shut.

• Motion Sensors. These sensors are used to protect an open space which cannot be breached without the alarm going off.

• Surveillance Cameras. Think of them as the ‘eyes’ monitoring the secured zone. They come in both wired and wireless configurations and can be remotely accessed on Smartphones, Tablets and PCs.

• High-Decibel Alarm. Alarms often serve two great functions. They are often loud enough to alert both occupants and nearby neighbours, but also shrill enough to send the intruder running.

• Yard Sign & Window Stickers. They may actually act as a marketing medium for alarm companies, but they are also sending an indirect message to potential intruders telling them to reconsider their intended illegal activity as the property is professionally protected. Click on the link to learn more about home security alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/

There are a wide array of smart ring doorbells available in the market today and all coming with detailed installation instructions. Here, we’ll make it clearer to enable you get it done right, the right time and with little stress. With a properly installed ring video doorbell, you’ll be able to identify who’s at the door before opening and even chat with them via your table, PC or Smartphone. And to make it even more interesting, you can easily install a ring doorbell yourself and save some money.

Installation Steps

• Assemble the mounting bracket

Bring out the mounting bracket that comes with your ring video doorbell. You’ll discover a small level within the mounting bracket, put this on the bracket’s slot. Once done, gently line it up to the spot where you want to place your doorbell.

• Determine the pilot holes

Firstly, ensure the bubble found in the level is straight. Then, mark out where the screws will go through.

• Drill the identified pilot hole spots

When drilling, you’ll need not just your drill and drill bit (or a masonry bit, if its a brick), but also your eye and ear protection. Drill the marked out spots to create pilot holes and subsequently hammer in the plastic anchors that comes in the ring doorbell’s pack to help hold your screws in place. Once done, put the bracket on the top and tighten your screws.

• Scan the QR Code

With the use of your phone, scan the special QR code given behind your doorbell to ensure the ring doorbell is only accessible by you and your loved ones.

• Secure the doorbell

Ensure that the bracket is properly in place and attach your doorbell to the mounting bracket. Once done, you can make it safe by using smaller security screws to hold it. Upon completion, your ring doorbell is ready for use - it’s that easy!

The number of sensors you need will depend on the size of your home. Most alarm systems feature 2-4 passive infrared sensors (PIRs) for motion detection, and 2-4 magnetic contact sensors on doors and windows. An alarm company will advise you of how many your property will need upon an inspecton.

Modern wireless alarm systems are as reliable as wired systems. Wireless systems can transmit alerts as quickly and reliably as wired systems. They are also suitable for installation in more places as there does not need to be space to hide the wires.

The best alarm system is really what suits all the demands details to a customers needs as well as the home itself. A properly carried out site survey in accordance with EN50131 gives a well trained installer the special site and also client details they call for to supply the most effective system

There is no such things as the most effective intruder alarm system. Each of the main makers provide a range of alternatives which can be made use of to make a suitable alarm system for your building. That claimed, if you are checking out wireless, you require to think about 3 things:

1. Is the way you want interact with the device.

2. How signals might obtain from one location of a residential or commercial property to another, ie, signal repeaters.

3. Radio jamming, only a few manufacturers have superhigh frequency intending to get rid of the chance of a radio signal being blocked.

All systems ought to consist of equipment that if mounted effectively could fulfill the qualities of security system in accordance of the present alarm standards. Petwise sensing units are not suggested as an ideal secure solution, as a result of the method these sensing units work as animals can trigger false alarms and some intruders can bypass them relatively easily. If the alarm system is purchased from a diy electrical outlet or is not graded after that it must be prevented, please note that safety grades just use if mounted to the requirement they were created for.

Properly installed and calibrated alarm systems will very rarely trigger a false alarm. If you have pets you will need to use pet-friendly alarm systems. External sensors should be properly calibrated to avoid triggering in the wind or rain. NSI is a recognised standard for all alarm installations, check the NSI flag is displayed on an installers credentials.

There are several advantages that comes with owning an electric gate such as the ability to close your gate with little to no effort. The list goes on, but one of the major reasons of having a gate installed is the security it provides. Several homeowners are not quite sure if electric gate can offer the much-needed security for their property. If you also have the same concern, then you’ve come to the right place! In this post, we aim to provide you with an insight into electric gates and their security so as to help you make the best decision moving forward. Let’s take a look!

First and foremost, if your electric gate is well boarded, they’re able to provide a level of privacy as no one will be able to see through them.  Asides this, the also represent a physical boundary – an extension of the walls or hedges that surrounds your property. With this, no one can simply walk over your drive or have any sort of access to your home or garden without having to take some sort of risk. Anyone who want to come onto your property would already be detected before ring the bell or arrive at your front door. Using audio or video intercoms, you’ll either hear or see who is at your gate and decide who gets to come in and who doesn’t.

What if someone wants to force their way onto your property by ramming your gates with a van, are electric gates strong enough to hinder them? Well, it’s very unlikely that they will as anyone applying force on swing gates that quite far from the hinges has leverage on their side. With a magnetic lock at the opening edges and ground latches, you can reinforce your gate. However, a lot of force from a vehicle with multiple horsepower multiplied greatly by the benefits of the leverage.