Find a Security Specialist you can trust in Larne.

Visible alarm systems can deter burglars. There are a range of options for what happens when an alarm is triggered. For example, there are bells only, alarm receiving centre, and homeowner monitored alarms. These are all effective as deterrence methods, and which you choose will depend on your specific needs.

Network enabled/IP cameras are digital CCTV cameras. With these cameras, the video captured can be streamed over the internet anywhere in the world. Most manufacturers of IP cameras have a smartphone app that allows you to watch the video feed on your phone.

This is usually the question that comes first when thinking about installing a home security system and reasonably so. However, it can also be very tricky to provide an accurate answer as alarms now features varying shapes and sizes. However one thing to have in mind when it comes to getting a burglar alarm is that it’s definitely better to be safe than sorry. Here, we are going to provide a clear and succinct information to help you get a good idea of how much you’d have to spend to have your house secured.

Let’s Consider the Different Types of Burglar Alarms

• Bells-only alarms

This is the most popular type which features a loud siren that is positioned at the exterior of your building and linked with varying motion sensors in strategic locations. Whenever a motion is detected by the sensors, an ear-splitting sound would be triggered. To get the basic starter kit (2-3 sensors and 1 siren) for a DIY installation, the cost ranges between £130 - £160. However for a more advanced system, the price jumps to £400 - £500.

• Dialler alarm systems

This works with different motion sensors strategically placed across the home. When triggered, it sets off the siren and also rings your mobile device. A system with two sensors and one emergency number costs between £200 - £300.

• Monitored alarm systems

This system is linked to a central call centre who alarms the authorities or private security to a violation of the protected zone. The cost for a monitored alarm system starts within the range of £500 to £600, while the monitoring services can cost within the range of £300 to £400 annually.

Other Possible Costs

• Installation

After purchase, you’ll need to decide whether or not you want your system professionally installed. Generally, the cost of getting a professional installation service costs between £150 to £200.

• Maintenance

Do you think your burglar alarm requires yearly maintenance inspections? Depending on the make and model of the system, the maintenance cost may vary. However, the prices usually starts within a range of £100 to £150.

What Is The Best Security Alarm System For Home?

Do you know you do not have to break the bank to secure your home and achieve peace of mind? Conventional home security systems generally require costly pro installation alongside extensive contracts. However with the advent of the smart versions, you can save a lot of money through personal installation and opting out of a monitoring plan if you deem fit.

If you are thinking about installing the best security alarm system in your home, there are a couple of factors you should take into account. These includes the ability to control the system remotely, wired or wireless system, motion detectors and video cameras. Across the series of home security systems we’ve tested and reviewed, SimpliSafe happens to be the most easy-to-use and install, reliable, affordable and well detailed. What’s more? It doesn’t seek to tie you down with a monitoring plan as you can choose to opt in/out at anytime.

Discover The SimpliSafe Difference!

As a user-friendly DIY security alarm system, SimpliSafe is right on top of the lot with several amazing features designed to improve security while also enhancing your comfort. The add-ons include a doorbell camera, smart lock, interior video camera as well as sensors. The system offers a 24/7 live-monitoring fees that are affordable and also highly competitive. However, a con of the system includes the lack of self-monitoring options or outdoor cameras. This implies that if you’re not subscribed to any monitoring plan, the security alarm system will only be able to operate locally. Also, it can be used with August locks, which represents the only non-SimpliSafe device compatible with the system. Overall, SimpliSafe is simply the best option available in the market mainly due to its impressive selection of add-ons, affordability, as well as its simplicity.

One of the major challenges faced by double gates is wind as this is always blowing over the gates and slamming them together anytime it passes by. So how do you tackle this? Since you can do only so little about the wind, the only option you have is to enforce or secure your double gates. This is quite simple if you have the adequate knowledge and skills, if not, we’d strongly recommend calling in a professional who can guarantee the best results the first time. In this post, we’re going to take your through the processes involved in securing a double gate to ensure your project turns out a success. Let’s take a look!

1. Hammer a pipe into the ground. Since this isn’t a heavy construction work, you need not worry about water finding its way into your basement. To do this, simply open the gate and stretch it to determine how far it can go. Once done, proceed to mark the place right below the gate’s edge. This is the spot where you will hammer in the metal pipe.
2. Install the lower bracket. With the pipe in place, the next thing is to have the lower bracket installed. Start by drilling some pilot holes if necessary, then screw the nails right into the wooden gate via the bracket’s holes.
3. Take measurements for the top bracket using the cane bolt. Once done with the lower bracket installation, you’ll have to bring out the cane bolt and attach it to the gate to give you an idea of where to place the top bracket - mark the spot using a pencil.
4. Install the top bracket. Start by removing the cane bolt and install the top bracket just as you’ve done with the lower bracket.
5. Install the cane bolt through both brackets.

Home security alarms discharge their duties following a simple concept - ensuring all entry points into the building are secured. This is done through the placement of sensors at all possible points of entry. These sensors, in turn, detects all possible breach in security and relays the information to either the control panel or the command centre situated somewhere in the building.

The usual spots where the sensors are installed includes the doors, windows (especially the easily accessible ones at the ground level) and any other possible entrance into and from a house. Meanwhile, motion sensors can also be incorporated to secure the open spaces inside the home.

Here are the important components of a home security alarm:

• The Control Panel. This basically controls the entire security system. It can activate or deactivate the alarm by communicating with all installed components. In the event whereby there is an intrusion, it automatically triggers the alarm and raises the awareness of an alarm monitoring company. It normally comes with a touchpad which allows for easy interaction and settings to activate/deactivate the alarm system. The control panel can also operate on voice commands and can be set to work using key fobs (also known as wireless remote controls).

• Door & Window Sensors. These comprises two parts which are to be placed in adjacent positions to each other - on the door/window and the door frame or window sill to generate a security circuit when the door/window is shut.

• Motion Sensors. These sensors are used to protect an open space which cannot be breached without the alarm going off.

• Surveillance Cameras. Think of them as the ‘eyes’ monitoring the secured zone. They come in both wired and wireless configurations and can be remotely accessed on Smartphones, Tablets and PCs.

• High-Decibel Alarm. Alarms often serve two great functions. They are often loud enough to alert both occupants and nearby neighbours, but also shrill enough to send the intruder running.

• Yard Sign & Window Stickers. They may actually act as a marketing medium for alarm companies, but they are also sending an indirect message to potential intruders telling them to reconsider their intended illegal activity as the property is professionally protected. Click on the link to learn more about home security alarm systems - https://alarm.quotatis.co.uk/3-ways-home-security-systems-keep-safe/

Most cameras have a night mode to capture video in the dark. They use an infrared sensor to detect infrared light. These pictures are black and white, but still retain plenty of detail. Cameras are also able to see and record in adverse conditions such as fog, dust and smoke.

Having a security gate installed on your property brings about a lot of benefits. However, to ensure these benefits are maximized, it’s important to make sure the gates are properly installed. The installation can be made a DIY task or professionally installed. If you wish to install your security gates by yourself, then you’ve come to the right place! In this post, we’re going to take you through the processes involved in the installation of a security gate. Let’s take a look!

1. Go through the instructions carefully to get the best out of your installation and also a good understanding.
2. Dig holes for the posts. Don’t make holes round to make sure the posts do not turn or twist.
3. Get rid of any obstructions like uneven ground, rocks or any other obstacles that may impact the free opening of the gate.
4. Re-confirm the distance between the two poles to make sure that the gate can hang perfectly between them.
5. Get an adjustable hinge. Adjustable hinge will allow for extra customization while also enabling improved correction of errors.
6. Make sure that the measurement taken leaves sufficient space for vehicles such as emergency vehicles and package delivery trucks when opened.
7. If you have a fence that’ll be connected to the gate, you should install the gate at the back of the fencing pillars. If you later decide to automate the security gate, this will prove to be a smart move as it enables a free and unhindered function.
8. Make sure you go through the local laws before installation.