Find a Kitchen Installer you can trust in Ringwood.

With the number of appliances, trades and products involved in the process of kitchen installation, it’s unarguably one of the most difficult rooms to renovate. And if an efficient management is not provided, the process can drag on for a lengthy period. As a result, if everything goes well, your new kitchen renovation can be installed in less than a week, but in most cases, this will often take a much longer time to complete. 

When it comes to kitchen renovation, proper management of the timeline is crucial to ensure a smooth and hitch-free process. Trades are required to be scheduled in the appropriate order as some specific tasks must be concluded before the others. In other words, to prevent unwanted push back timelines, everything must be properly organized.

Furthermore, it’s also key to provide sufficient time to enable the full completion of each stage in the process so as to prevent reschedule trades in the event whereby one stage happens to be more time consuming than planned.

Another important factor that can affect the timeline is the type of kitchen splash back. While tile splash backs are a lot quicker due to the fact that the tiles can be cut on site, individualized stone or glass splash backs often take a longer period of time to fit.

If you prefer a kitchen with stone benchtops, usually your kitchen will take much longer than 10 days to install as benchtops can not be done prior to the installation of the kitchen cabinets - average turnaround time for this is usually about 4 to 5 weeks. However, kitchens with laminate worktops can be installed within a week or at times, up to 10 days. This is because laminate kitchen worktops is typically delivered alongside the kitchen.

An electric range cooker should always be installed by a registered electrician. They will be aware of wiring regulations, what sockets are needed and make sure that your cooker is installed safely and correctly. make sure you book one before your new cooker id delivered!

A safety bracket or anti-tip device is a piece of metal with a u-shaped slot. It attaches to your cooker and either a wall or the floor to prevent your cooker from tipping over.It depends on how heavy your range cooker is as to whether you need a safety bracket. A very heavy cooker should stay in place without one whereas a lighter one will probably need one. If your electric range cooker needs a safety bracket, this will probably come with it.

Knowing how to design a kitchen is a skill that will save you huge bucks, but it can also be a tricky affair to its highly dynamic nature. The kitchen space can be used for a wide range of activities which includes cooking, dining, entertaining, work and even a relaxation spot. Therefore, designing a kitchen in great detail from the outset is compulsory. If you’re looking for ways to design your kitchen, then you’ve come to the right place! However, if you don’t have enough confidence to pull this off, we’d recommend you get in touch with a professional who can guarantee the best results the first time. In this post, we’re going to take a look at the kitchen designing and planning process.

• Think about how you wish to use the space. How you wish to use the space and your requirements will be the major determinant of how your kitchen layout will be.
• Measure the space. When planning your kitchen, there’s a need to take an accurate measurement of your floor so that the required appliances will fit comfortably within the space. For instance, when an island is place at the middle, it should leave enough floor space which you can go around to access the rest of the kitchen.
• Consider the perfect layout. Effective planning of a kitchen and maximizing of the space makes the kitchen a lot more enjoyable to cook and carry out other activities. Depending on your requirements, you can determine the perfect layout for your space.
• Factor in the appliances. When determining your layout you should ensure to put the necessary appliances into consideration.
• Measure out sufficient countertop space. It’s always recommended to have at least 600mm either side of the sink and hob, however its your personal need that’ll be the main factor.

a typical rate would be around ₤ 300 for suitable kitchen doors just from a local company, or up to ₤ 1200 from a large National supplier.

You can install most cookers flush to the sides of your kitchen cabinets. However, it’s a good idea to leave a gap between them anyway so that your cooker can be serviced, cleaned and moved if necessary. The commonly recommended space is about 2.5mm on each side of your cooker.Some cookers need even more than this, otherwise they can damage your kitchen cabinets. If you’re not sure about what your electric range cooker needs, it’s best to ask your installer or get in touch with the manufacturer.

Not if you don’t want to! The size of many appliances is standardised, meaning they should fit in to any new kitchen. Ask an experienced kitchen designer or installer if you’re not sure if your current appliances will fit into a new kitchen, and of course, new cupboards and worktops can be fitted around your existing appliances if you are keep them!

Cookers usually look best if they’re installed at the same height as the work surfaces they’re next to. Most range cookers have adjustable legs so that they match a range of work surface heights.If you want your range cooker to match your work surface height, make sure that your installer knows this before they get started.