Find a Kitchen Installer you can trust in Ebbw Vale.

With the number of appliances, trades and products involved in the process of kitchen installation, it’s unarguably one of the most difficult rooms to renovate. And if an efficient management is not provided, the process can drag on for a lengthy period. As a result, if everything goes well, your new kitchen renovation can be installed in less than a week, but in most cases, this will often take a much longer time to complete. 

When it comes to kitchen renovation, proper management of the timeline is crucial to ensure a smooth and hitch-free process. Trades are required to be scheduled in the appropriate order as some specific tasks must be concluded before the others. In other words, to prevent unwanted push back timelines, everything must be properly organized.

Furthermore, it’s also key to provide sufficient time to enable the full completion of each stage in the process so as to prevent reschedule trades in the event whereby one stage happens to be more time consuming than planned.

Another important factor that can affect the timeline is the type of kitchen splash back. While tile splash backs are a lot quicker due to the fact that the tiles can be cut on site, individualized stone or glass splash backs often take a longer period of time to fit.

If you prefer a kitchen with stone benchtops, usually your kitchen will take much longer than 10 days to install as benchtops can not be done prior to the installation of the kitchen cabinets - average turnaround time for this is usually about 4 to 5 weeks. However, kitchens with laminate worktops can be installed within a week or at times, up to 10 days. This is because laminate kitchen worktops is typically delivered alongside the kitchen.

Working with a designer to plan your kitchen means you’ll get the best possible use out of the space and it maybe that wasted space can be put to good use. Designers can offer you lots of space saving solutions and innovative kitchen units, making your kitchen a truly functional area.

a typical rate would be around ₤ 300 for suitable kitchen doors just from a local company, or up to ₤ 1200 from a large National supplier.

Most cookers have a depth of 60cm. This matches the standard depth of kitchen cabinets. However, you can get cookers and work surfaces that are shallower or deeper.Range cookers usually look best if they match the surfaces next to them. If you want your electric range cooker to do this, make sure you measure your work surfaces before you go looking for a cooker.

A safety bracket or anti-tip device is a piece of metal with a u-shaped slot. It attaches to your cooker and either a wall or the floor to prevent your cooker from tipping over.It depends on how heavy your range cooker is as to whether you need a safety bracket. A very heavy cooker should stay in place without one whereas a lighter one will probably need one. If your electric range cooker needs a safety bracket, this will probably come with it.

You can install most cookers flush to the sides of your kitchen cabinets. However, it’s a good idea to leave a gap between them anyway so that your cooker can be serviced, cleaned and moved if necessary. The commonly recommended space is about 2.5mm on each side of your cooker.Some cookers need even more than this, otherwise they can damage your kitchen cabinets. If you’re not sure about what your electric range cooker needs, it’s best to ask your installer or get in touch with the manufacturer.

An electric range cooker should always be installed by a registered electrician. They will be aware of wiring regulations, what sockets are needed and make sure that your cooker is installed safely and correctly. make sure you book one before your new cooker id delivered!

Range cooker hoods should be installed between 65 -75cm above the hob. However, you should check installation instructions, as some cooker hood styles need to be installed slightly lower. If you fit your cooker hood too high, it will reduce extraction performance.