Heating | Electric Radiators & Heaters
Coleraine - BT51
Enquiry from: David J
Start Date: Immediate
electric storages heater installers
-->
Over 10 reviews & an average rating of 4.1/5 stars, you'll find the right pro
Use the shortlist button to select up to 4 tradespeople, enter your project details and press send
Get up to 4 quotes from local Heating Engineers near you
Coleraine - BT51
Enquiry from: David J
Start Date: Immediate
electric storages heater installers
Coleraine - BT52
Enquiry from: Jenny W
Start Date: Immediate
Need advice on a thermostat and fitting of it
Coleraine - BT52
Enquiry from: ASHLEY P
Start Date: Immediate
requesting installation of worchester combi boiler 25ke. third floor apartment are you the property owner: owner of the property is this for a residential or commerial building: domestic type of curre...
Londonderry - BT48
Enquiry from: Patrick D
Start Date: Immediate
Hi, I am looking for a quote to replace four E7 Storage units in a one bed apartment (supply & installation). Thanks, Patrick
Londonderry - BT48
Enquiry from: David C
Start Date: Immediate
Smart thermostat fitted and ability too control heat in two or three areas
Magherafelt - BT45
Enquiry from: Mervyn W
Start Date: Immediate
Radiators for large bed rooms
Coleraine - BT52
Enquiry from: Keith L
Start Date: Immediate
Install Hive Active heating thermostat and controller
Limavady - BT49
Enquiry from: MARGARET M
Start Date: Immediate
customer made an online enquiry for new a gas boiler and is looking for quotes. confirmed interest via and needs advice on which boiler model to choose. please call to arrange appointment customer h...
Limavady - BT49
Enquiry from: Ken C
Start Date: Immediate
Customer is looking for a new gas boiler. Confirmed interest via phone at 11:28 Unsure of the right boiler for their home so needs to discuss options. Please call to arrange an appointment
Coleraine - BT52
Enquiry from: Carol W
Start Date: Immediate
Customer is looking to have a new gas boiler installed. They are unsure if they have a system or a combiboiler. Please contact them to discuss what boiler would be best suited for their home.
Londonderry - BT47
Enquiry from: Dean B
Start Date: Immediate
I need a tado smart thermostat installed
Magherafelt - BT45
Enquiry from: Pat M
Start Date: Immediate
Customer is looking for a new gas boiler. Confirmed interest Unsure of the right boiler for their home so needs to discuss options. Please call to arrange an appointment
Magherafelt - BT45
Enquiry from: Pat M
Start Date: Immediate
Customer living in Magherafelt area made an enquiry for new boiler quotes via one of our websites. Customer confirmed interest via Homeowner needs advice on the boiler make and model to choose Pleas...
Londonderry - BT47
Enquiry from: Jon D
Start Date: Immediate
New replacement oil boiler
Coleraine - BT51
Enquiry from: Nathaniel E
Start Date: Immediate
Customer is looking for quotes for Oil Boiler Replacement from pros around Coleraine. Please call to arrange appointment to discuss
Coleraine - BT51
Enquiry from: Gary G
Start Date: Immediate
Customer is looking for quotes for Oil Boiler Replacement from pros around Coleraine. Please call to arrange appointment to discuss
Coleraine - BT52
Enquiry from: Steve L
Start Date: Immediate
Customer is looking for Oil Boiler Replacement quotes. They are unsure of options so would like to discuss. Confirmed interest via Customer lives in Coleraine area Please call to arrange an appointm...
Coleraine - BT51
Enquiry from: Robin E
Start Date: Immediate
Customer in Coleraine area made an enquiry for Oil Boiler Replacement online. Please call to arrange an appointment to discuss options
Londonderry - BT47
Enquiry from: Shaunagh B
Start Date: Immediate
customer made an enquiry for oil boiler replacement via one of our websites. looking at various options they would like to discuss directly confirmed interest please call to discuss and arrange appoi...
Londonderry - BT47
Enquiry from: Nigel M
Start Date: Immediate
customer made enquiry for oil boiler replacement quotes online. mr lives in londonderry area. please call to arrange appointment
How much do Heating Engineers in County Londonderry cost?
Prices for Heating Engineers around County Londonderry can differ relying on the kind of service that you need to have actually carried out in your house. It's the question we are asked a lot "how much do Heating Engineers in County Londonderry cost?". It's always great to have an idea of how much a Heating Engineer will likely charge for their work. Rates will vary based on the products and the tradesman chosen. The table reveals the types of task that Heating Engineers commonly do and also the regular price series of these projects. Some jobs take longer to complete than others so prices do fluctuate by job.
Jobs that Heating Engineers in County Londonderry can do:
Heating Engineer job | Heating Engineer cost in 2024 |
---|---|
Combi boiler in County Londonderry | £1,875-£2,875 |
Lpg boilers in County Londonderry | £2,320-£3,480 |
Biomass boilers in County Londonderry | £7,500-£11,500 |
New Oil boiler in County Londonderry | £2,250-£3,450 |
Boiler repair and service in County Londonderry | £113-£173 |
Electric heaters in County Londonderry | £1,500-£2,300 |
Eco boiler (hhrco) in County Londonderry | £1,875-£2,875 |
Boiler finance in County Londonderry | £1,875-£2,875 |
Heating control system in County Londonderry | £225-£345 |
Micro chp boiler in County Londonderry | £3,750-£5,750 |
Oil boiler repairs & servicing in County Londonderry | £83-£127 |
Gas works in County Londonderry | £60-£92 |
Boiler cover in County Londonderry | £5-£25 |
Commercial Gas Boiler in County Londonderry | £4,000-£10,000 |
If you get the right size boiler for your home and you get it serviced regularly, your boiler could last up to 15 years. It may even last longer than this, but you’ll find that your boiler begins to become less efficient as it gets older. Also, as technology improves, a boiler older than 15 years may not be the most efficient one on the market.
Ad hoc visits from your engineer to fix small issues with your heating system may actually seem cheaper and a lot more affordable, however when a boiler is ripe enough for a change these small issues are always never ending. Over some period of time, these small issues will inevitably get worse and the idea of “mend and make do will be an absolutely false economy. The best course of action in this sort of event is to find a replacement boiler to install as soon as possible. In this article, we’re going to give you some hints that’ll show you when your boiler needs to be replaced. Now let’s take a look!
✓ Insufficient hot water. Here, you’ll have to check the size of your hot water cylinder. It’s crucial to make sure that your boiler is rightly sized to power your heating as well as hot water circuit in line with your demands. You should always seek the advice of a heating expert who can recommend whether to fix or replace the boiler.
✓ Strange noises. It’s normal for components of the boiler to become worn or damaged over time. Replacing the particular component that’s causing the knocking or rattling may seem cost effective at first but more often than not, the noises usually signal a bigger issue which is likely to build up over time. Hence, it’ll be a lot more logical to replace the boiler itself.
✓ Regular repair of your boiler. It’s essential to have your heating system serviced by a Gas Safe engineer on an annual basis. However, when you have to call them more often than once a year for your yearly maintenance, it may be a wise decision to consider getting a replacement.
✓ Other events whereby you may need a new boiler includes when you can’t get the right temperature in your room, when the radiators don’t heat up as they should, when your boiler leaks and if your boiler still has a pilot light.
How To Install An Oil Boiler Heating System
Just like several other skills, the installation of an oil boiler heating system can be a challenge. It requires enough persistence to actually get right, so if you’re the type with little patience, we’d recommend you hire the services of a professional oil boiler heating system fitter who can guarantee the best results and save you time and extra money due to potential damages.
To install your boiler system yourself, it’s always advisable to start by getting the information on the best installation processes from the supplying company which will go a long way to save you from future headaches. However, we’ve put together this guide to give you a basic knowledge on how its done. Let’s have a look!
lRead Instruction Manual
• Carefully read and digest the instruction manual thoroughly.
• Make sure you understand the installation diagrams
• Spread out the materials and get familiar with them.
lFigure Out What Goes Where
• Take your time to determine where everything goes in relation to the others.
• Identify the new radiator’s position.
• Get sufficient sealants to prevent possible leakages inside the walls.
lIdentify The Pipe Routes
• Determine the pipe routes while fitting the new radiators
lInstall The Boiler
• Turn off water and all electrics
• Fit the boiler into the wall
• Make sure the fittings are secured.
lInstall The Radiator
• The effectiveness of your home’s heating system is as good as the radiators you incorporate and how good they’re installed.
• You may have to utilize extra radiators in large open plan kitchens and living rooms (for effective heating).
lOffer Ventilation
• Once you’ve successfully installed the new radiator, a small dose of air ventilation would be needed.
• Turn the key of each valve located at the bottom, do not stop until a little amount of water spills over the top of the unit.
How Much Is A Gas Safety Certificate?
If you’re a landlord in the UK, then you’d know a gas safety certificate is a legal requirement. If yes, then you’d probably like to know how much it’ll cost to get a gas safety certificate so you can make plans on obtaining one for your property. In this article, you’ll find all you need to know about the amount you’re expected to pay for a gas safety certificate in the UK.
First and foremost, let’s look into the use of the certificate. Basically, a gas safety certificate is the legal inspection of your property’s gas appliances which would be done on an annual basis. Only an approved Gas Safe engineer is allowed to carry out this statutory check. Ultimately, if you own rental properties in the country, this is a requirement you can’t afford to overlook to ensure the safety of your tenants.
Furthermore, included in this inspection are each and every gas appliances, chimneys, pipework as well as flues in the property. In recent times, several individuals make use of fewer gas appliances which ultimately implies that they may only need the servicing of their gas fire. Once you’ve passed the inspection, you’ll be given your CP12 certificate which must be kept for a minimum of two years. A copy should also be provided to your tenants within 28 days of issue. So how much will it cost to get a gas safety certificate?
Depending on your location in the UK as well as the number of gas appliances incorporated, the average cost of a gas certificate will range between £60 to £90. The Gas Safe engineer will carry out the task as a fixed and statutory job.
If you’re looking for a reliable or reputable source for your new gas boiler, you definitely won’t find much better than British Gas. Using a big firm like British Gas comes with a plethora of benefits , but of course there are also some drawbacks, with the boiler prices being the main one and biggest turn off for most homeowners. However, just before we delve straight in to the price, let’s look at a thing or two about the big company.
The company, “British Gas are not a boiler manufacturer as you probably would have first imagined. They’re actually a company that specializes in the installation of boilers. As a result, they’re able to install just about any type of boiler you can imagine from any manufacturer. Be it a Worcester Bosch Greenstar 8000 Style or a Baxi 600, they’re able to provide you with the cost of having these boilers installed in your home or property.
Combi boilers are perfect boilers for space-saving and this makes them very popular on the market. They’re also very efficient when it comes to heating water instantly and warm your in few minutes. The price of a new British Gas combi boiler varies on a number of factors. Generally, the installation prices of combi boilers start from £1,800. Therefore, if British Gas are to be competitive with their pricing it should also be around this price.
However, if you have a large house with several rooms with a higher demand for hot water, British Gas will most likely recommend boilers such as Worcester Bosch 440CDi and the likes. Judging from other firms in the market, the price to have these types installed should be in excess of £3,000.
The Oil Firing Technical Association or OFTEC operate a competent persons scheme to certify installers. It’s always recommended to use an installer with this certification as it proves they have the training and expertise to properly install your boiler and give you realistic advice on the efficiency of your system. Also, OFTEC registered installers offer Workmanship Warranties to protect you if there are any problems after installation.
Condensing boilers are the in-thing when it comes to modern heating systems in UK businesses and across the globe for a good reason. This is primarily due to the fact that condensing boilers happens to be highly efficient as it enables the fuel you’re burning to heat up your home go a lot further. Having a new high efficiency condensing boiler rather than an old G-rated non condensing boiler will not only enhance your heating controls, but also save you a lot of money annually. In this article, we’re going to take you through the basics of a condensing boiler. Let’s take a closer look!
If you’re interested in getting a greener and more efficient boiler, you simply can’t afford to look beyond a high efficiency condensing boiler. This is purely due to the fact that these condensing boilers happens to make a better use of the heat they’re able to produce from burning fuels like oil or gas ( in other words, they require less heat from the burner, which makes them a lot more efficient).
So how does a condensing boiler work? Unlike a non-condensing heat-nly boiler, some heat will be wasted in form of hot gases which are released from the flue. Meanwhile a condensing boiler captures some of the heat from these gases and puts them to use for heating up water that’s coming back from your central heating system. As a result, it requires just a minimal heat from the burner which make the boiler more efficient.
You should take note that all new modern boilers are condensing boilers. Therefore if you’re planning to replace an old boiler with a new one, you’ll definitely be buying a new condensing boiler and benefit from all the efficiency and savings that comes with it.
To ensure that your boiler is safe and operating efficiently, it’s essential to have it serviced on a regular basis.
Generally, a boiler service will deliver a wide array of benefits which includes the opportunity to identify safety issues like a possible leak of carbon monoxide, efficient use of energy and reduction in energy bills, prevention of breakdowns, a valid warranty when the boiler is serviced regularly by a qualified engineer as well as an extended lifespan. So what exactly does a boiler service cover? This guide will give you a good insight as to what happens during that service.
Before we get started, it’s very important to note that the work done is always as good as the engineer you employ. Therefore, it’s advisable to make sure your preferred engineer is qualified before proceeding with the service. Below are some of the basic practices the engineer may perform during their visit.
• Thorough Inspection
During the visit, the engineer will carry out a detailed examination of your boiler to ensure it still meets the current standards while also making sure that there are no leaks or corrosion. What’s more? They’ll also examine the boiler’s flame for any faults.
• Boiler Casing Removal
The boiler casing will be detached to check all components and ensure they’re free from all forms of dirt and see to it that they’re all working just as they should. This will include examination of the heat exchanger, main injector, burner and spark probe.
• Flue Examination
The engineer will inspect the flue terminals to make sure there are no form of obstructions and it’s also safely installed.
• Gas Pressure Examination
This is done to make sure the heating system is operating at the right pressure.
Answer a few quick questions to help us match you with the right Heating Engineer
Receive no-obligation quotes from 4 Heating Engineers working in County Londonderry.
Compare prices, customer reviews and services, and hire the right Heating Engineer.
View our open Heating Engineer jobs near you
Join today