Find an Electrician you can trust in Fishguard.

Unlike in houses built in the 1970s where a good majority of the houses will not need to be rewired, for houses built in the 1960s you’d probably need to rewire the entire house unless the wiring is the modern PVCu coated type. Generally, the homes built especially in the 1960s and 1970s brought about enormous changes. This is because over the years our way of living began to change and as a result, our need for electricity became even greater. In response to this, the electrical systems we incorporate needed to change in order to match the new set standards.

In the 1960s, the amperage normally used was increased to 100, which enables home and property owners to power their dishwasher, microwave as well as refrigerator all on one circuit. However, while this may be a remarkable improvement for our grand parents, this is just enough to cater for our modern day appliances. In recent times, new homes are constructed using a wide range of dedicated circuits due to the fact that each of our appliances makes use of much more electricity to function. Consequently because the 100 amp panels of the 1960s possessed restricted space for breakers, home and property owners who still had the units in their homes will inevitably require a sub panel or a new panel entirely - meaning a total rewiring of their property.

Furthermore in the 1960s, builders turned to aluminium from the previously used copper as it was a great conductor and also happens to be relatively cheap. However, after a couple of years a host of electrical fires cropped up in houses that are wired using aluminium. It was later discovered that when the switch to aluminium was made, the light switches or receptacles which were originally made for the previously used copper was overlooked. It was learned that there’s a corrosive chemical reaction that arises as a result of the two dissimilar metals when connected. Hence, the more reason why aluminium wired houses in the 1960s needs to be rewired.

Most domestic solar thermal panels do not need planning permission and are covered by permitted development rights. There are restrictions on the size and location of these systems. If you live in a conservation area or listed building, or want to install a very large solar thermal system, check with your local authority to see if you will need planning permission.

Periodic testing and inspections should be completed: Every 10 years for your home, Every five years for rented accommodation, Every three years for a caravan, Every year for a swimming pool.Electrical inspections are also carried out when buying, selling or renting a property.

For most homeowners, rewiring a house is always a sore subject they’d prefer to avoid especially when they think of the expenses they’d have to incur or the mess and complexity that the project involves. However, this is a subject we’d all have to face sooner or later as an old wiring poses a lot of drawbacks, while an improper wiring can also prove to be more expensive and even cause more damage as it can lead to not only electrical shorts but also electrical fires. When a wire triggers a spark or a current overload, this can cause fire and the entire house may be down in ashes within a couple of minutes. Hence, one of the several reasons why house rewiring is just too important to ignore.

In this FAQ, we’re going to take you through the house rewiring process so as to ensure that your project is done to perfection. However, if you do not feel confident enough to pull this off, we’d strongly recommend you get in touch with a reliable electrical professional who can guarantee that a safe and effective work is done.

• Firstly, you’d have to upgrade the main service panel to a minimum of 100 amps
• Fit dedicated circuits in the service panel for all the home’s major appliances.
• Allow for a space of about 6 to 8 feet between electrical outlets throughout the house in order to cut out the need to run extension cords which could be a fire hazard.
• Install only three-prong type to avoid electrical shocks when fitting new outlets.
• Using ground fault circuit interrupters, fit outlets in the bathrooms, kitchen as well as outdoors. These outlets will shut themselves out so as to prevent electrical shock when wet.

Fuse box prices will vary and a periodic inspection should be carried out first. However, domestic fuse boxes cost an average of £460. A qualified electrician will advise if yours needs to be replaced and it's always a good idea to obtain a number of quotes before committing to this.

There are a range of variables that will determine which heating system is best for your home, such as the level of insulation and size of rooms. However, electric heating is suitable for many homes. Electric boilers are very compact and do not need a flue. Underfloor heating is effective at heating rooms of any size.

If you’re planning to get an electric vehicle, the next thing that naturally comes to mind is getting a good charger with it. As a result, this is one of the most common questions asked when it comes to electric vehicles. We’ve put together this list of some great home ev chargers to help you make the best informed decision possible moving forward. Let’s take a look!

• Charge Point Wi-Fi Enabled Level 2 EV Charger. If what you need is a faster charge for your car due to the high frequency of usage of the electric vehicle, then this charger might just be the best option for you. It’s claimed to charge electric vehicle batteries six times faster than a standard 120 volt home system. What’s more? The mobile application will inform you about the amount of charge your battery has regardless of your location. This feature can be of great benefit especially when you’re trying to determine whether to put in an additional hour at work or heat straight home.
• Juice Box Pro 40 Level 2 EV Charger. This is a level 2 charger which features a web based charging control so as to allow you control the charging parts of your vehicle from anywhere, be it in the comfort of your home or office without having to go to the garage or parking lot.
• Siemens VersiCharge VC30GRYU. This is an easy-to-use plug and play installation that comes with a mounting bracket if you happen to own a NEMA 50 receptacle. It boasts a charging time that’s 4 times faster than level 1 electric vehicle chargers and possess a charge delay feature or 2, 4, 6 or 8 hours.

With each year that passes, the amount of electric cars on the road keeps rising and with them comes a necessity to develop new infrastructures and also accessories like charging cables as well as connectors for easy sustainability. This concept is still pretty much new to the general public as most people still use vehicles that are fuelled by petrol and diesel. There are also some differences in design which asides from the lack of an engine underneath the vehicle’s bonnet, the way in which an electric car is filled up largely varies petrol or diesel powered vehicles. There’s a lot that people will have to learn about electric cars and even more so when it comes to their everyday use. One of the most common questions a lot of individuals ask about electric cars is whether all electrical vehicle chargers are the same. If you’re also looking for an answer to this question, then you’ve come to right place!

If you’re interested in getting an electric car, charging your vehicle at home may not generate any major concern but what about making use of the public charging system? This is when it gets a bit confusing because if you’ve never had to do it before you may worried about making use of the wrong charger on your car. So the question is, does every electric vehicles have the same plug? The answer is simple - there are different plugs and cables for varying electric vehicle brand as well as points of use. In general, you’d have to choose most suitable charging level for your electric vehicle.