Find a Door Fitter you can trust in East Grinstead.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

A French door simply means a door style which features two sections that pivots on hinges installed on the door framing’s opposite sides, which opens and closes at the centre. Glass panels are used to make each door’s section covering the middle of the door ( either individual panels that are muntins framed or a single panel of glass). When open, the whole doorway is an open space with no post at the middle. French doors are popular for a number of reasons. Not only do they bring a particular level of charm, class and elegance to your home, but also allow natural light into a room and create a wide opening unlike a sliding patio door. They’re mostly installed at the rear of a home so as to allow for a direct walkway exiting the house and straight into the garden, thereby making your garden even a lot more closer to your home.

There are 3 main types of patio doors which includes the following:

• External or French patio doors

As the name suggests, they’re the French door that leads outside mostly into the garden. Generally when opened, the two door swings outwards, but there are some that can open inwards. They mostly possess a number of large glass panels which enable natural light to brighten up your home.

• Interior

This basically means fitting double French doors between two rooms in a house. This is very similar to the external ones with two doors and also made up of glass panels.

• Sliding

They are very similar to both the external and interior designs but rather than the two doors swinging open, they slide apart to create a great amount of space to walk into the garden. This is the classic charm that sliding French doors provide.

Doors can be bought in a range of materials, such as wood, aluminium or uPVC. There are also more modern composite doors which use a variety of different materials for toughness and durability. Doors are also available in glass reinforced plastic (GRP), and engineered timber.

Do you have a composite door and wondering the best type of lock that can be used on your prized asset. To choose the right type of lock for a composite door, it’s of utmost importance to select one that’s designed to work perfectly with the composite configuration. By doing this, you’ll improve the security of your home while also achieving the desired look. To secure a composite door, the most common way is by incorporating a high security multipoint lock. Therefore, depending on the look you want for your door as well as how you want it to function, here are the four types of locks you can consider to go with your composite door.

• Split Spindle Lock

A split spindle lock would be your best bet if you’d like to automatically prevent access to your home from the outside. This lock allows you to open your door smoothly by utilizing the inside handle, however, you’ll need a key to turn the latch bolt to gain access back inside.

• Lever or Lever Lock

If you want an unhindered access in and out of your property, a lever lock gives you this opportunity without the need for a key until it’s totally deadlocked. The lever lock is installed to the back door which makes unauthorized entry even less likely.

• Slam Lock

If you’d prefer a super fast locking, then this lock type is your answer! It automatically triggers the lock hooks immediately you close the door - without having to lift the handle. However, to gain access to the inside of your home or bolt the door from the inside, you’ll need a key.

• Key Wind-Up Lock

This lock is wholly key operated and totally handle-free. Immediately the door is closed, the latch bolt will be automatically activated, ensuring that a key would be needed to gain access back inside.

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

Is your garage door a bit old and outdated? Are you planning to make some renovations? Or perhaps you just want a newer and more stylish garage door, that’s safer and easier to operate, installed. Fitting a garage door can be a bit tricky but it’s not as difficult as you might think. If you’re without proper training or experience, it’s advisable to get in touch with a reliable professional for help in order to guarantee the best results while also saving you both time and money. This guide offers you step by step instructions to assist you in the installation of a new door on our garage.

To get started, the obvious first step is to remove the old garage door. Carefully go through the manufacturer’s instructions to achieve this. Here, you’d basically have to unlatch the door, take apart the door’s panel and unscrew the tracks.

lMeasure, Fit The Hinges & Handles

• Take a measurement of the area in which the door will be fitted

• From the top of opening to ceiling should include a space of about 10 to 12.

• For the length of the garage, you should have the door’s height with about 18 or more space.

• Once done, attach stops to the sides of the opening

• Lay out the bottom piece of the door and include the weather stripping (if you deem fit) using the sawhorses.

lPut The Bottom Piece In Position

• Fit the bottom piece into door frame using a level

• Hit nails partway into each jamb

• Bend the nails slight to secure their position.

• Assemble the vertical, curved and horizontal pieces of the track using the manufacturer’s instruction

lFit The Remaining Panels

• Put the second panel on the first panel

• Use a hammer to hit nails into it

• Fit the hinges.

• Repeat the process for the number of panels required and achor individual piece into the door jamb.

lInstall Rollers

• Fit the rollers in the section’s supports

• Put the rollers in the assembled track and make sure they’re not pressed to tightly against the track to prevent friction.

lSecure Tracks & Fit The Springs

• Fit the curved and horizontal pieces

• Assemble the springs following the manufacturer’s instructions

• Ensure that the tracks are level and parallel by lifting the door to about half length

• Lift the door to cover the distance left and fit the springs to the pulley system

Composite doors have coloured skins rather than a coloured coating on their surface. This means that their colour is long-lasting and they don’t need repainting. If you want to change the colour of your composite door it’s best to ask the manufacturer about the best way to do this. This is because different composite doors are finished in different ways.

The colours available will depend on the material of the door. Timber or aluminium doors can be painted to many different RAL colours. uPVC doors are generally available in fewer colours, but they can still be matched to many existing designs. A window and door company will be able to advise what optionas are available to suit your property.