Find a Door Fitter you can trust in Sudbury.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.

Do I Need A Planning Permission For Bifold Doors?

Are you thinking about installing bifold doors for your home or property? If yes, you’d probably want to know if you’re going to need planning permission. Well, you’re not alone! Being fully aware the application process for planning permission might not be the easiest of tasks, several home owners would like to know if they’ll be going through the process for installing bifold doors. The answer is, you may actually not need a planning permission for installing bifold doors in your home. Adding or replacing doors is basically one of the home improvement efforts that are less complicated and as a result, they normally do not require planning permission. But despite that, they still need to comply with the UK’s building regulations.

Changing or adding doors to your home or property are usually considered to be covered under permitted development and even more so, when there’s no extension constructed for the doors. However under certain circumstances, these rights can be removed by the local authorities. A good example is when the property is a listed building or in a designated conservation area.

In the event whereby you find yourself having to apply for a planning permission, the time it usually takes to be granted one depends on the number of planning applications on queue. However, it typically takes about 8 weeks or 2 months to tender your application and be granted planning permission if it’s required. To apply for planning application by UK households, you’ll have to pay £172 - which is the set application fee nationwide. In certain situations where objection arises, there may be some delays in the process. If you’re still not certain whether your new bifold doors will require a planning permission, we’d recommend consulting your local authority.

What Is The Best Material For A Front Door?

It can be a tricky challenge to find the perfect door for your home or property. At times we may find the look we desire but it just won’t suit our budget, other times we’ll find what suits our budget but it just won’t be secure or appealing enough to our taste. Due to the fact that your front door is the first line of defence for your home and governs entry to the rest of your house, it’s very important to look for a material that’s strong, sturdy and is able to withstand both the elements as well as wear and tear. You definitely need all these qualities while also making sure the good looks are also intact. In this article, we’re going to take a look at the best material for a front door.

The fact is that all door materials have both their advantages and disadvantage, therefore the best material actually depends on the homeowner’s preferences. Generally, fibreglass and steel doors are able to deliver better insulation than wood doors. And this is even better when they’re Energy-Star certified which means they’re double and triple-paneled glass, energy efficient cores as well as tight-fitting frames. Fibreglass doors is made from a composite material which can be designed to suit most homes. What’s more? They’re very easy to maintain and also durable. However, despite all these, some homeowners actually prefer wooden doors for their homes.

Doors made of wood naturally have more style and character than fiberglass doors and in several cases, are easier to repair. Furthermore, they don’t show scratches or dents as readily as the other door materials. However, they’re susceptible to warping and cracking unlike their counterparts.

It is possible to replace a door without replacing the frame. However, most people choose to replace both their door and frame at the same time, as this is likely to make your home security and energy efficiency better, particularly if your existing front door is very old or the frame is distorted.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

As the name suggests, composite doors are made up of multiple components or materials which includes uPVC and foam or solid timber core, just to mention a few. Individual materials incorporated manufacturing a composite door plays their own important role with unique properties which are perfectly blended to give the strongest and most durable door materials currently available in the market. These materials are pressed and glued together as they’re subjected to high pressure conditions.

The need to counteract the weaknesses found in most single material doors, ultimately gave birth to the development of composite doors - which puts together several materials with specific properties to cancel out each others’ excesses or weaknesses. Purchasing a composite door means a valuable investment in a sturdy door frame manufactured using the toughest and most robust materials. In other words, you’re increasing the security of your home, enjoying the weatherproofing qualities of the door and also giving you a peace of mind knowing both your loved ones and properties are safe, well protected and secured. Apart from the materials used in making the door, you’re also provided with an array of choices when it comes to the personalization of the door to your needs and taste. You can choose from a variety of colours, woodgrain effects, textures as well as finishes.

Overall, composite doors also requires little maintenance and are very durable. Due to the modern techniques used in manufacturing a composite door, the colour as well as beauty is guaranteed to last a very long time. What’s more? Generally, the composite is weather and fade resistant so you won’t have to worry about spending either time or money for the care or maintenance of your door even after frequent or heavy usage.

We’ve all heard the common phrase that first impressions matter most. Well, this expression also applies to your home. When people arrive at your home, the door is the first thing they come in contact with and that speak volumes about the impression they’ll have about you. In modern times, there’s a large variety of choices when it comes to choosing a front door for your home in terms of style and design - from distinctive and alluring wood finish effect to elegant stained glass patterns. These are all important when it comes to choosing a front door, but one of the most significant factors is the material.

Both uPVC and composite doors have their advantages and disadvantages, so choosing one may rest on the purpose of installing the door.

UPVC Doors:

Pros

• Cost - Although composite doors are certain to deliver a great value for money, the initial spending on uPVC is lower and doesn’t put much strain on your budget

• Little Maintenance - The maintenance of a uPVC door does not go beyond wiping any stains with a damp cloth. However, this should be done carefully and regularly as extended neglect can lead to discolouration over time

Cons

• Styles - When it comes to styles, uPVC doors has a considerable lower style options compared to composite doors.

Composite Doors:

Pros

• Finishes - Composite doors offer a wider range of finishes than uPVC doors and as such, deliver greater versatility in showcasing your home’s character.

• Energy Efficient - Made from various materials glued together under intense pressure, composite doors happen to be thicker than uPVC doors and hence, a bit more energy efficient.

• Improved Security - Although both doors offer a great level of security, composite doors (due to its robust construction) are a bit more superior in this area.

Cons

• Cost - Although composite doors offer an immense value for money, the fact still remains that they’ll also stretch your budget more than uPVC doors.