Find a Door Fitter you can trust in Corby.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

So you’ve decided to add some new French doors for your home? If yes, then you’re likely going to be concerned about whether or not you’ll require a planning permission to get started.

Properties are compelled to meet certain requirements and have proper permission in place in order to be in line with the regulations. Overall, you’re going to need planning permission in the following situations:

• If you want to construct something new.

• If you want to a make a major change to a building like an extension.

• If you want to change the use of your building such as converting it from residential to commercial.

Getting a new door or replacing an existing one doesn’t usually require a planning permission as it’s one of the less complicated improvements you can make to a home. As a result, this kind of improvement is normally covered by permitted development rights especially when you’re not constructing an extension for which to use the French door. However in the events whereby a permission is needed, it will most likely going to be granted if the proposed changes does not have an impact on the primary elevations of the house which is usually the front of the building.

It’s also important to note that permitted development can be limited by local authorities. These limitations include buildings in a conservation area, listed buildings, and if you happen to reside in an area of immense aesthetic appeal or other designated areas like National Parks. If such situation before you change your French doors, it’s important to consult your local authority before proceeding.

In life, only change is constant. So while making changes to your home you should ensure it’s one that’ll enhance and benefit your home in the long term. And more often than not, this means having to think outside the box from time to time.

When it comes to home improvement, there are a plethora of changes that can be made to enhance your home. But if you’re not sure or confused as to where to begin, why not start with what your visitors will first see when they come visiting - the door? Not only will the installation of new double glazed doors help to maximize your home’s selling power, but can also go a long way to increase the value of your property if you’d like to sell it in the future.

One of the most crucial components of the home that you can improve is UPVC doors and windows. This is due to the fact that replacing these components happen to be a great way of making your home more energy efficient, while also improving its visual appeal as well as several other benefits. So if you’re considering getting UPVC doors fitted in your home, you might want to know the cost involved. However, there’s no single and precise answer to this question as UPVC door prices vary depending on your chosen company. Therefore, it’s always a wise decision to obtain different quotes before making a decision. And fortunately for those who are having financial challenges, it’s very possible to obtain funding that’ll help cover your installation costs.

Generally, on the average, the cost of a good standard UPVC door including installation will cost within the range of £500 to £800.

How Do Bifold Doors Work

Generally, bifold doors are modern styled doors that are able to create a grand entrance and catch any visitor’s attention almost immediately. Unlike the conventional sliding doors, they are way more practical and convenient which makes it an awe-inspiring home addition. However, with the design being relatively new when compared to its counterpart - the sliding doors, not everyone knows about how they work. Therefore, it’ll only make sense to discover more about this door design before deciding on its utility. So how does a bifold door work?

The bifold door ( both interior and exterior types) operates on a built in tracking system that runs along the glass panels and connected on a train. In other words, the doors fold in and then slowly and smoothly glides over the laid out track which is backed by a chain of wheels or a tracking system. This function is carried out in a smooth and quiet manner, irrespective of the medium of movement.

Now talking of the bifold structures, they mostly come in pairs especially the interior designs. The design can either be in form of two doors that can be folded to one side or four individual panels that can be opened from the centre while some of the doors will fold on each side. Typically, the tracking will feature these units as well as the other important fittings, and also open inwards or outwards.

One of the significant qualities of these doors making them a popular option amongst homeowners nowadays is the flexibility and versatility of these units as well as their effectiveness when it comes to saving space. You’d be surprised to know that some of these bifold door designs can feature up to 7 panels which are linked via hinges and connected to the top or bottom of the roller track.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.

Are Aluminium Front Doors Good?

When it comes to creating a great first impression for your home or property, a visually appealing door is simply one of the most important make-or-break factors. Given the fact that your front door greatly influences how the rest of your house will be seen, it’s therefore crucial to choose one that’ll complement your home’s architectural and interior style. However, your choice shouldn’t only be determined by the aesthetics as functionality of the door is also vital.

Fronts doors made from aluminium are available in different styles which are designed to perfectly suit both traditional as well as contemporary homes. In this article, we’re going to look at the numerous benefits that is usually provided by aluminium front doors.

✓ Strength. Aluminium front doors may be relatively lightweight when compared to other front door materials, but they happen to be a composite material and very strong. They can even feature larger glazing elements to allow maximum natural light in the house, while not compromising its strength or overall quality. In fact, they happen to be tougher and more robust that any other type of door.

✓ Style. Several individuals tend to think aluminium front doors err when it comes to contemporary styling but this is totally false. They’re available in different styles which is able to complement both traditional and contemporary homes.

✓ Durability. It’s a fact that aluminium doors do not experience any form of expansion or contraction, so regardless of the climate, they won’t crack or warp. They’re also resistant to corrosion which makes them the perfect choice especially for coastal areas. Overall, they’re able to last a very long time while also maintaining their good looks.

✓ Little maintenance. Aluminium front door are very simple and easy to maintain which in turn saves you both time and money.

What Is The Best Material For A Front Door?

It can be a tricky challenge to find the perfect door for your home or property. At times we may find the look we desire but it just won’t suit our budget, other times we’ll find what suits our budget but it just won’t be secure or appealing enough to our taste. Due to the fact that your front door is the first line of defence for your home and governs entry to the rest of your house, it’s very important to look for a material that’s strong, sturdy and is able to withstand both the elements as well as wear and tear. You definitely need all these qualities while also making sure the good looks are also intact. In this article, we’re going to take a look at the best material for a front door.

The fact is that all door materials have both their advantages and disadvantage, therefore the best material actually depends on the homeowner’s preferences. Generally, fibreglass and steel doors are able to deliver better insulation than wood doors. And this is even better when they’re Energy-Star certified which means they’re double and triple-paneled glass, energy efficient cores as well as tight-fitting frames. Fibreglass doors is made from a composite material which can be designed to suit most homes. What’s more? They’re very easy to maintain and also durable. However, despite all these, some homeowners actually prefer wooden doors for their homes.

Doors made of wood naturally have more style and character than fiberglass doors and in several cases, are easier to repair. Furthermore, they don’t show scratches or dents as readily as the other door materials. However, they’re susceptible to warping and cracking unlike their counterparts.