Find a Door Fitter you can trust in Fochabers.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

A composite door is a valuable investment any homeowner would be glad to make due to its numerous benefits. Not only are they super energy efficient and good looking, but also exceptional when it comes to keeping your house warm and guaranteeing your safety and maximum security. They come in wide range of styles, colours as well as personalization options, which makes them one of the most popular and strongest door you can find in the market today. However, the question that hangs over the mind of many potential investors is how fade resistant are composite doors? Would the visual appeal remain intact for a long period of time or fade away after a few years of exposure to intense sun?

The last thing any homeower would want to see is a priced asset looking dull and tired only after a couple of years after installation. Owners of timber doors worry about having to re paint every couple of years. UPVC door owners worry that their doors can, at times, start to fade when exposed to a strong and intense sunlight. So what exactly do composite door owners worry about? The simple answer is absolutely nothing! Proud composite door owners only have to do a quick wash with a warm soapy water as upkeep for their long lasting and durable asset. This is because composite doors are typically made from Glass Reinforced Plastic outer skin which makes them highly resistant to the element. So whether it’s raining heavily or the sun is shining intensely, the colours of your beloved composite door will not fade and will remain exactly the same way it was when purchased. No matter what the UK weather throws at them, the reinforced plastic skin and robust core ensures the door remains water tight and in top condition always.

There are several benefits that can be derived from insulating your garage door. Not only can it reduce your energy bills and protect your garage’s content from elements, but can also go a long way to increase the return on your property’s value, reduce noise, increase the garage door’s strength and deliver a more convenient garage and home. Insulating your garage is a task you can actually take on by yourself. However, if you lack proper training or experience, we’d recommend you leave it for a reliable professional who can ensure the project is done right, the first time - saving you both time and money. This guide will give you a good insight on how you can go about the project.

To insulate your garage, you’ll need a fibreglass insulation, garage door insulation, expanding foam, drywall, gloves and long sleeves, wood, sharp utility knife as well as a staple gun and staples. Now let’s take a look at the garage door insulation process!

lClear The Walls

• Remove the drywall (if present)

• Clean out the dirt and stud cavities.

• Wipe out any chemicals in the garage like gasoline.

lIdentify Gaps & Cracks In The Wall

• Shake your expanding foam vigorously for about a minute.

• Attach the straw to the can and use it to spray the wall openings.

• Fill the gaps until its 50% full

• Leave the foam to fill the openings completely in about 5 to 15 minutes. It should be hardened or completely cured within 6 to 8 hours.

lInstall Fibreglass Insulation

• Staple the insulation’s paper face to the side of the stud and not the face.

• Place a piece of wwod on the insulation’s top to act as a guide to properly cut the insulation to size.

• Cut the excess insulation with a utility knife.

• Tuck in the insulation to make for easier stapling.

• Staple the insulation down to the stud’s side.

lUse Drywall To Cover The Insulation

• Screw and glue the drywall to the stud.

• Do not leave the insulation’s paper exposed.

What Is The Best Front Door For Security?

If you’re about to get a new front door for your home, one thing that most homeowners usually put into consideration is the type of door that can guarantee the highest level of security. Your front door is the first line of defence in ensuring the safety of your home. Going past your home’s threshold should deliver an unrivalled feeling of safety and shutting the door behind you should be enough to keep out any unwanted visitors or disturbances. Hence, the reason why the safety and security of your home should be a huge influencing factor to consider when getting a new type of door for your home or property.

In order to achieve this, the material through which your door is produced is the most crucial element that you must take into account when taking a decision. The door’s material is simply everything, it determines the security and safety, durability, appearance and even price.

In addition to avoiding potential front door headaches including warping, expansion and short lifespan, steel doors are simply the type of door that provides the most security and also the most durable. This type of door, when featuring the appropriate mechanisms, can’t be kicked in ( any unwanted visitor who still considers his leg useful wouldn’t even dare) and as result, keeping those you want out, out! They aren’t affected by temperature or the elements as they won’t crack or warp. Asides from this, they can also be designed to suit your taste with any paint or finish to your most preferred style. What’s more? Steel doors don’t require any form of reinforcement and are the most secure option in the market for your front door.

Bifold doors are generally very low maintenance. They will only need infrequent cleaning and occasionally you may need to oil the track mechanism to ensure smooth opening. Speak to your installer and ask about general housekeeping and long lasting treatments.

Do Bifold Doors Open In Or Out?

If you’re considering getting bifold doors, then you’d probably want to know if it’s going to open inwards or outwards. The answer to the question is both, it can open inwards or outwards. Generally bifold doors are configured with flexibility in mind. They’re designed in such a way that allows them to be opened inwards or outwards depending on your preference or what best suits the space on which they will be installed. As a result, when you’re considering the installation of new bifolding doors in your home or property, one of the things you’ll have to take into account is whether you want your bifold doors to open inwards or outwards. Below are a couple of tips that’ll help you make the best decision as to whether your bifold doors should open inwards or outwards.

• Where you’re going to fit your bifold doors can play a huge role in determining whether they’ll open inwards or outwards. For instance, if they’re going to be fitted in your dining room, the furniture you have there will determine if there’s enough space to accommodate them inside or otherwise.

• The frequency of use will also be an influencing factor. If the door is frequently used, then a bifold door set with a traffic door which opens outwards will be more convenient for heavy daily use.

• The size of your outdoor space. Is your outdoor space restricted by your patio’s size, the decking area or garden? If yes, the opening inwards would be the best option. So also if your door opens straight out onto a pathway, you might want to make the bifold doors open inwards as well so as not to block the path.

What Is A Bifold Door?

Right from time the conventional choice incorporated in closing large doorways have always been French doors or sliding doors. However, with the advent of bifold doors design, there has been a great alternative which can go a long way to increase the value, visual appeal as well as space-saving functionality of a home or property. Due to the fact that these design is relatively new to the market when compared to its counterparts, the benefits are not yet defined. However being a popular option it’s definitely worth knowing a bit more of the pros and cons of installing bifold doors. Let’s have a look!

How do bifold doors work? They simply work based on a concertina principle, folding back hinged frames and glass panels into a compact storage area which appears to be a bit small in a room’s corner but opens up an entire doorway. And unlike their counterparts - the French doors or standard hinged doors, bifold doors feature panels that are hinged together and inserted on the runners in the floor as well as the upper lintel or doorway’s beam. As you open the door, the door’s panel slide and fold concurrently without limiting the doorway’s size in any way.

It may also incorporate what is called the “traffic door. The traffic door simply refers to the conventional swinging door which can serve as one of the bifold door’s components. This goes a long way to enhance the functionality of the bifold door by creating a standard door within its arrangement. What’s more? It adds convenience to the bifold door’s design in such a way that only a single panel will have to be opened to gain a quick access anytime its required without having to fold back all panels each time the door is put to use.