Find a Door Fitter you can trust in Hertfordshire.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

It is possible to replace a door without replacing the frame. However, most people choose to replace both their door and frame at the same time, as this is likely to make your home security and energy efficiency better, particularly if your existing front door is very old or the frame is distorted.

Traffic doors are doors which open like an ordinary door. They are contained within the bifold door configuration. It’s recommended to fit a traffic door if you intend on using your bifold door as the main access point to your garden. If you are considering an installation, ask the installer about the benefits.

A French door simply means a door style which features two sections that pivots on hinges installed on the door framing’s opposite sides, which opens and closes at the centre. Glass panels are used to make each door’s section covering the middle of the door ( either individual panels that are muntins framed or a single panel of glass). When open, the whole doorway is an open space with no post at the middle. French doors are popular for a number of reasons. Not only do they bring a particular level of charm, class and elegance to your home, but also allow natural light into a room and create a wide opening unlike a sliding patio door. They’re mostly installed at the rear of a home so as to allow for a direct walkway exiting the house and straight into the garden, thereby making your garden even a lot more closer to your home.

There are 3 main types of patio doors which includes the following:

• External or French patio doors

As the name suggests, they’re the French door that leads outside mostly into the garden. Generally when opened, the two door swings outwards, but there are some that can open inwards. They mostly possess a number of large glass panels which enable natural light to brighten up your home.

• Interior

This basically means fitting double French doors between two rooms in a house. This is very similar to the external ones with two doors and also made up of glass panels.

• Sliding

They are very similar to both the external and interior designs but rather than the two doors swinging open, they slide apart to create a great amount of space to walk into the garden. This is the classic charm that sliding French doors provide.

In life, only change is constant. So while making changes to your home you should ensure it’s one that’ll enhance and benefit your home in the long term. And more often than not, this means having to think outside the box from time to time.

When it comes to home improvement, there are a plethora of changes that can be made to enhance your home. But if you’re not sure or confused as to where to begin, why not start with what your visitors will first see when they come visiting - the door? Not only will the installation of new double glazed doors help to maximize your home’s selling power, but can also go a long way to increase the value of your property if you’d like to sell it in the future.

One of the most crucial components of the home that you can improve is UPVC doors and windows. This is due to the fact that replacing these components happen to be a great way of making your home more energy efficient, while also improving its visual appeal as well as several other benefits. So if you’re considering getting UPVC doors fitted in your home, you might want to know the cost involved. However, there’s no single and precise answer to this question as UPVC door prices vary depending on your chosen company. Therefore, it’s always a wise decision to obtain different quotes before making a decision. And fortunately for those who are having financial challenges, it’s very possible to obtain funding that’ll help cover your installation costs.

Generally, on the average, the cost of a good standard UPVC door including installation will cost within the range of £500 to £800.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

Should A Front Door Be Metal?

Being the home’s first access point, the front or entry door must be effective at preventing unwanted visitors or intruders from gaining entry into the house. Also, from a stylistic point of view, your door should be appealing and make both residents and guests feel welcome. These, rather contradictory standpoints, are best met by metal doors as they’re able to offer both security and beauty to any home or property. As a result, making them the perfect door material especially for front or entry doors. In this article, we’re going to look at what makes metal the proper material for front doors. Let’s have a look!

✓ It provides a grand entrance to both residents and guests. Front doors made out of metal are able to deliver a perfect blend between durability and elegance. They can be customized to suit the specific taste of the home or property owner or constructed to appear as inviting as the residents of the house would prefer. What’s more? It’s very pleasing to know that a visually appealing door goes a long way to add to both the style and value of any home.

✓ It serves a reliable security measure. Beyond the look of metal doors are their immense ability to provide protection from external elements. And since iron is sturdier than any other material incorporated in making front doors, burglars or any other unwanted visitors will find it a herculean task to forcefully gain entrance into your home. Even if you decide to make use of glass to add to the design, the integrity of the metal door will never be compromised.

✓ It’s a great value for money. Not only does metal doors provide both beauty and security, but they’re also more affordable than door materials like wood or fibreglass and requires only a little maintenance. With advanced technology, energy efficiency now constitutes part of the metal door offerings.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.