Find a Door Fitter you can trust in Drybrook.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

What Is A Bifold Door?

Right from time the conventional choice incorporated in closing large doorways have always been French doors or sliding doors. However, with the advent of bifold doors design, there has been a great alternative which can go a long way to increase the value, visual appeal as well as space-saving functionality of a home or property. Due to the fact that these design is relatively new to the market when compared to its counterparts, the benefits are not yet defined. However being a popular option it’s definitely worth knowing a bit more of the pros and cons of installing bifold doors. Let’s have a look!

How do bifold doors work? They simply work based on a concertina principle, folding back hinged frames and glass panels into a compact storage area which appears to be a bit small in a room’s corner but opens up an entire doorway. And unlike their counterparts - the French doors or standard hinged doors, bifold doors feature panels that are hinged together and inserted on the runners in the floor as well as the upper lintel or doorway’s beam. As you open the door, the door’s panel slide and fold concurrently without limiting the doorway’s size in any way.

It may also incorporate what is called the “traffic door. The traffic door simply refers to the conventional swinging door which can serve as one of the bifold door’s components. This goes a long way to enhance the functionality of the bifold door by creating a standard door within its arrangement. What’s more? It adds convenience to the bifold door’s design in such a way that only a single panel will have to be opened to gain a quick access anytime its required without having to fold back all panels each time the door is put to use.

Composite doors have coloured skins rather than a coloured coating on their surface. This means that their colour is long-lasting and they don’t need repainting. If you want to change the colour of your composite door it’s best to ask the manufacturer about the best way to do this. This is because different composite doors are finished in different ways.

So you’ve decided to add some new French doors for your home? If yes, then you’re likely going to be concerned about whether or not you’ll require a planning permission to get started.

Properties are compelled to meet certain requirements and have proper permission in place in order to be in line with the regulations. Overall, you’re going to need planning permission in the following situations:

• If you want to construct something new.

• If you want to a make a major change to a building like an extension.

• If you want to change the use of your building such as converting it from residential to commercial.

Getting a new door or replacing an existing one doesn’t usually require a planning permission as it’s one of the less complicated improvements you can make to a home. As a result, this kind of improvement is normally covered by permitted development rights especially when you’re not constructing an extension for which to use the French door. However in the events whereby a permission is needed, it will most likely going to be granted if the proposed changes does not have an impact on the primary elevations of the house which is usually the front of the building.

It’s also important to note that permitted development can be limited by local authorities. These limitations include buildings in a conservation area, listed buildings, and if you happen to reside in an area of immense aesthetic appeal or other designated areas like National Parks. If such situation before you change your French doors, it’s important to consult your local authority before proceeding.

More often than not, when we think about replacing our old or existing door with a new unit, we tend to get a bit creative. We think about the panel to use, but often forget about the door’s frame which is just as important. The frame is way beyond an ordinary trimming that serves as a boundary for the slabs, it also ensures the door opens with ease and also sees that heat are being locked in and security is tight. There are a variety of frame options available when fitting a new door, and putting a composite door in a uPVC frame is one. In this article, we’ll give you an idea of the great effects of composite door and uPVC frame combination and help you make informed decision about the best setup that’ll perfectly satisfy all your doorway needs and budget.

Putting a composite door in a uPVC frame or a uPVC door in a composite frame is without a doubt the most popular door/frame combinations. In fact, you’d be shocked just how well a composite door and uPVC frame complements and supports each other in either alteration. If you’re the type that likes the unmatched levels of insulation, visual appeal as well as security that’s provided by composite doors, fitting this in a UPVC frame is really one that’ll set you apart. This combination is the most loved and for a good reason. You’ll get to open your door with ease while it also remains weathertight, save some money using the usually less costly uPVC frames and ultimately, combine the strengths of both materials incorporated. What’s more? It’s an opportunity for you to make a striking impression on all your visitors.

As you would have guessed, patio doors are exactly what the name suggests. They mainly act as a means by which you can access your patio from inside your house. As a result, they’re mostly fitted at the rear of your home which leads out to the garden and ultimately, the patio. In recent times, it’s mostly unlikely to see patio doors installed in homes without patios or homes with deckings instead. Generally, patio doors feature large floor to ceiling windows that are able to offer a wide open view of your garden as well as patio. In short, these characteristics are what mainly makes them unique from other normal exterior doors.

There are different types of patio doors which you can choose from and all with their own unique installation costs.

• Sliding Doors

Due to their space saving qualities, this type of sliding door are a popular choice amongst homeowners. As the name suggests, they basically slide across panels rather than opening in or out. This style also comprises the most significant windows which gives you a wider and clearer view of your garden while also allowing more natural light into the house.

• French Doors

Offering a standard design with two different panels with each able to swing wide open on its own, the French door is a conventional style door popular amongst traditionalists. French doors are generally stylish and very energy efficient, however they tend to consume more space within your home. It comes with several designs and a variety of colours to choose from.

• Bifold Doors

Bifold doors are the ideal choice if you want a more modern style for your home. These doors almost folds itself whether open or closed. Generally, they move along a track similar to sliding doors, but each panel folds when open. Here, you’re still offered the floor to ceiling wide open windows which further makes the overall effect even more special.

A composite door is a valuable investment any homeowner would be glad to make due to its numerous benefits. Not only are they super energy efficient and good looking, but also exceptional when it comes to keeping your house warm and guaranteeing your safety and maximum security. They come in wide range of styles, colours as well as personalization options, which makes them one of the most popular and strongest door you can find in the market today. However, the question that hangs over the mind of many potential investors is how fade resistant are composite doors? Would the visual appeal remain intact for a long period of time or fade away after a few years of exposure to intense sun?

The last thing any homeower would want to see is a priced asset looking dull and tired only after a couple of years after installation. Owners of timber doors worry about having to re paint every couple of years. UPVC door owners worry that their doors can, at times, start to fade when exposed to a strong and intense sunlight. So what exactly do composite door owners worry about? The simple answer is absolutely nothing! Proud composite door owners only have to do a quick wash with a warm soapy water as upkeep for their long lasting and durable asset. This is because composite doors are typically made from Glass Reinforced Plastic outer skin which makes them highly resistant to the element. So whether it’s raining heavily or the sun is shining intensely, the colours of your beloved composite door will not fade and will remain exactly the same way it was when purchased. No matter what the UK weather throws at them, the reinforced plastic skin and robust core ensures the door remains water tight and in top condition always.