Find a Door Fitter you can trust in Dunbartonshire.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

What Is Better, Steel Or Aluminium For A Front Door?

If you’re extending or refurbishing your home or property or constructing a new one, you’ll, sooner or later, get to the point when you’d have to determine the type of door material you want to use. The most common choices include steel, aluminium, wood and PVC. However, in this article we’ll only be looking at steel and aluminium to discuss which is better for a front door. Let’s take a look!

✓ Home security. Intruders and unwanted visitors are always a concern regardless of where you live. If this is your biggest concern when going for a front door then steel doors are your best bet as they happen to be one of the sturdiest and strongest materials that can be used to manufacture a door. Not only do they not crack or warp, but they also offer some high security models that features a large number of locks as well as hinges with various style designs. However, this does not mean aluminium are left behind on this subject either as there are also some high security doors that uses aluminium as the primary metal component.

✓ Thermal insulations. Both door presentations are not completely made of steel or aluminium. For a better insulation, they’ll feature other materials such as foam,wood, polystryene foam, or fibreglass core to prevent the escape of heat. As a result, both doors can do a great job when it comes to thermal insulation like keeping your house cool in the summer and warm in the winter for a better energy efficiency.

✓ Aesthetics. If this is your primary criteria for a front door, then aluminium has a wide range of colours and styles to match the style of your home.

There are a range of locks that are available for doors. Look for ones accredited by Secured by Design and British Standards. The quality of the installation will also affect the security of the door. Additional security measures such as a double lock, security bolts and chains can support this.

There are several benefits that can be derived from insulating your garage door. Not only can it reduce your energy bills and protect your garage’s content from elements, but can also go a long way to increase the return on your property’s value, reduce noise, increase the garage door’s strength and deliver a more convenient garage and home. Insulating your garage is a task you can actually take on by yourself. However, if you lack proper training or experience, we’d recommend you leave it for a reliable professional who can ensure the project is done right, the first time - saving you both time and money. This guide will give you a good insight on how you can go about the project.

To insulate your garage, you’ll need a fibreglass insulation, garage door insulation, expanding foam, drywall, gloves and long sleeves, wood, sharp utility knife as well as a staple gun and staples. Now let’s take a look at the garage door insulation process!

lClear The Walls

• Remove the drywall (if present)

• Clean out the dirt and stud cavities.

• Wipe out any chemicals in the garage like gasoline.

lIdentify Gaps & Cracks In The Wall

• Shake your expanding foam vigorously for about a minute.

• Attach the straw to the can and use it to spray the wall openings.

• Fill the gaps until its 50% full

• Leave the foam to fill the openings completely in about 5 to 15 minutes. It should be hardened or completely cured within 6 to 8 hours.

lInstall Fibreglass Insulation

• Staple the insulation’s paper face to the side of the stud and not the face.

• Place a piece of wwod on the insulation’s top to act as a guide to properly cut the insulation to size.

• Cut the excess insulation with a utility knife.

• Tuck in the insulation to make for easier stapling.

• Staple the insulation down to the stud’s side.

lUse Drywall To Cover The Insulation

• Screw and glue the drywall to the stud.

• Do not leave the insulation’s paper exposed.

We’ve all heard the common phrase that first impressions matter most. Well, this expression also applies to your home. When people arrive at your home, the door is the first thing they come in contact with and that speak volumes about the impression they’ll have about you. In modern times, there’s a large variety of choices when it comes to choosing a front door for your home in terms of style and design - from distinctive and alluring wood finish effect to elegant stained glass patterns. These are all important when it comes to choosing a front door, but one of the most significant factors is the material.

Both uPVC and composite doors have their advantages and disadvantages, so choosing one may rest on the purpose of installing the door.

UPVC Doors:

Pros

• Cost - Although composite doors are certain to deliver a great value for money, the initial spending on uPVC is lower and doesn’t put much strain on your budget

• Little Maintenance - The maintenance of a uPVC door does not go beyond wiping any stains with a damp cloth. However, this should be done carefully and regularly as extended neglect can lead to discolouration over time

Cons

• Styles - When it comes to styles, uPVC doors has a considerable lower style options compared to composite doors.

Composite Doors:

Pros

• Finishes - Composite doors offer a wider range of finishes than uPVC doors and as such, deliver greater versatility in showcasing your home’s character.

• Energy Efficient - Made from various materials glued together under intense pressure, composite doors happen to be thicker than uPVC doors and hence, a bit more energy efficient.

• Improved Security - Although both doors offer a great level of security, composite doors (due to its robust construction) are a bit more superior in this area.

Cons

• Cost - Although composite doors offer an immense value for money, the fact still remains that they’ll also stretch your budget more than uPVC doors.

The garage door is unarguably one of the most overlooked and ignored household items, however, it’s benefits are glaring for all to see. Not only does it protect your home, vehicles and property from potential burglars, but also makes your home more visually appealing and loved. As one of the most unthought about items, there’s a huge possibility that it’s care and maintenance is also one of the furthest things from your mind.

When overlooked, garage doors can develop a number of issues which varies from power interruptions and bad remotes to broken seals and chain and other sorts of issues. Given the fact that you know little or nothing about garage doors, it can be a bit challenging to figure out who to call on or reach out to for help. So now to the question, who fixes garage doors?

Garage doors are fixed by garage door specialists or garage door repair companies. The companies mostly deal with all major brands and models to ensure your needs are well attended to whenever you call on them. Regardless of the problems you might have, be it a bad remote, broken seal or chain, power interruption and more, garage door repair specialist knows just what to do to ensure your garage door is up and running again in next to no time. Majority of these companies also offer maintenance services to ensure the smooth operation of your door, prevent sudden failures, extend the lifespan of the door and also save you some money on costly repairs. Knowing a garage door can be a pricey investment in your home, you’d have to be careful while selecting the perfect garage door specialist. Use the Quotatis service to find garage door specialists, compare their reviews to get the best deal.

A composite door is a valuable investment any homeowner would be glad to make due to its numerous benefits. Not only are they super energy efficient and good looking, but also exceptional when it comes to keeping your house warm and guaranteeing your safety and maximum security. They come in wide range of styles, colours as well as personalization options, which makes them one of the most popular and strongest door you can find in the market today. However, the question that hangs over the mind of many potential investors is how fade resistant are composite doors? Would the visual appeal remain intact for a long period of time or fade away after a few years of exposure to intense sun?

The last thing any homeower would want to see is a priced asset looking dull and tired only after a couple of years after installation. Owners of timber doors worry about having to re paint every couple of years. UPVC door owners worry that their doors can, at times, start to fade when exposed to a strong and intense sunlight. So what exactly do composite door owners worry about? The simple answer is absolutely nothing! Proud composite door owners only have to do a quick wash with a warm soapy water as upkeep for their long lasting and durable asset. This is because composite doors are typically made from Glass Reinforced Plastic outer skin which makes them highly resistant to the element. So whether it’s raining heavily or the sun is shining intensely, the colours of your beloved composite door will not fade and will remain exactly the same way it was when purchased. No matter what the UK weather throws at them, the reinforced plastic skin and robust core ensures the door remains water tight and in top condition always.