Find a Door Fitter you can trust in Devon.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

What Is The Best Material For A Front Door?

It can be a tricky challenge to find the perfect door for your home or property. At times we may find the look we desire but it just won’t suit our budget, other times we’ll find what suits our budget but it just won’t be secure or appealing enough to our taste. Due to the fact that your front door is the first line of defence for your home and governs entry to the rest of your house, it’s very important to look for a material that’s strong, sturdy and is able to withstand both the elements as well as wear and tear. You definitely need all these qualities while also making sure the good looks are also intact. In this article, we’re going to take a look at the best material for a front door.

The fact is that all door materials have both their advantages and disadvantage, therefore the best material actually depends on the homeowner’s preferences. Generally, fibreglass and steel doors are able to deliver better insulation than wood doors. And this is even better when they’re Energy-Star certified which means they’re double and triple-paneled glass, energy efficient cores as well as tight-fitting frames. Fibreglass doors is made from a composite material which can be designed to suit most homes. What’s more? They’re very easy to maintain and also durable. However, despite all these, some homeowners actually prefer wooden doors for their homes.

Doors made of wood naturally have more style and character than fiberglass doors and in several cases, are easier to repair. Furthermore, they don’t show scratches or dents as readily as the other door materials. However, they’re susceptible to warping and cracking unlike their counterparts.

If you’re interested in getting a replacement door, you may want to know just how long it’ll take to fit your new patio door. However, there’s no specific answer to this question as there are different types of patio doors with all having unique installation processes as well as varying completion times. Generally, fitting patio doors will normally take within a range of 10 days to 21 days, except in situations whereby you have specific and non standard requirements. The time range provided represents the total duration starting from ordering the patio door till the installation is completed and this also varies from style to style.

If you want to get a professional double glazing surveyor, he will assess you property while also making sure the right and accurate measurements are taken and also plan out the installation. In order to avoid any unnecessary delays, this is a very crucial step as the surveyor will work to make sure any potential problems is identified early on. Once done, you can then wait a couple of days for the door to be manufactured and then fitted, depending on the door style and finish.

The time to completion varies depending on the complexity of the design. Patio doors may take about 14 days to 21 days with bifold patio doors being the most complicated and time consuming. This is due to the fact that they take longer time to manufacture and when you factor in the possible duration of the installation, you can expect a total duration between the range of 6 weeks to 8 weeks.

In addition, there are also some other factors that can affect the time it takes to install patio doors. These includes the need for a higher energy rating, upgraded security fittings, door hardware with custom finish and other special requirements that are beyond the standards.

It is possible to replace a door without replacing the frame. However, most people choose to replace both their door and frame at the same time, as this is likely to make your home security and energy efficiency better, particularly if your existing front door is very old or the frame is distorted.

Composite doors have coloured skins rather than a coloured coating on their surface. This means that their colour is long-lasting and they don’t need repainting. If you want to change the colour of your composite door it’s best to ask the manufacturer about the best way to do this. This is because different composite doors are finished in different ways.

The garage door is unarguably one of the most overlooked and ignored household items, however, it’s benefits are glaring for all to see. Not only does it protect your home, vehicles and property from potential burglars, but also makes your home more visually appealing and loved. As one of the most unthought about items, there’s a huge possibility that it’s care and maintenance is also one of the furthest things from your mind.

When overlooked, garage doors can develop a number of issues which varies from power interruptions and bad remotes to broken seals and chain and other sorts of issues. Given the fact that you know little or nothing about garage doors, it can be a bit challenging to figure out who to call on or reach out to for help. So now to the question, who fixes garage doors?

Garage doors are fixed by garage door specialists or garage door repair companies. The companies mostly deal with all major brands and models to ensure your needs are well attended to whenever you call on them. Regardless of the problems you might have, be it a bad remote, broken seal or chain, power interruption and more, garage door repair specialist knows just what to do to ensure your garage door is up and running again in next to no time. Majority of these companies also offer maintenance services to ensure the smooth operation of your door, prevent sudden failures, extend the lifespan of the door and also save you some money on costly repairs. Knowing a garage door can be a pricey investment in your home, you’d have to be careful while selecting the perfect garage door specialist. Use the Quotatis service to find garage door specialists, compare their reviews to get the best deal.

When it comes to the installation of an external door in your home or property, you’ll be indulged with a plethora of styles and options available in the market today. But as you would have imagined, not all of these options and styles are created equal. Not all can match the security and quality standards of a composite door. A door’s quality is greatly influenced by a wide variety of factors such as the materials incorporated as well as the overall design. For instance, going for a door made with low quality materials can as well be synonymous with leaving your door open while going out.

Composite doors are modern type of door used in homes in recent times. They’ve been design to combat the common flaws identified in singular material doors. The door puts together a perfect mix of materials which have been singled out due to their beneficial properties and effectively taps out the “old flaws. Composite doors are known to be highly resistant to weather conditions, no matter how extreme and unlike singular material doors, it does not react quickly to seasonal changes. And as a result of the insulating foam core of composite doors, they possess a higher thermal resistance than wooden doors.

Generally, a composite door is designed in such a way that makes it look as a wooden door featuring a very alluring wood grain. With the exceptional quality of the materials incorporated, the colours won’t fade, no discolouration will take place and ultimately, it doesn’t require much more than wiping with a damp cloth when it’s dirty as maintenance activity. In conclusion, composite doors are greatly designed modern doors which are manufactured using various materials. The premium quality provided by composite doors is unrivalled in the door industry.