Find a Door Fitter you can trust in Ballymoney.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

More often than not, when we think about replacing our old or existing door with a new unit, we tend to get a bit creative. We think about the panel to use, but often forget about the door’s frame which is just as important. The frame is way beyond an ordinary trimming that serves as a boundary for the slabs, it also ensures the door opens with ease and also sees that heat are being locked in and security is tight. There are a variety of frame options available when fitting a new door, and putting a composite door in a uPVC frame is one. In this article, we’ll give you an idea of the great effects of composite door and uPVC frame combination and help you make informed decision about the best setup that’ll perfectly satisfy all your doorway needs and budget.

Putting a composite door in a uPVC frame or a uPVC door in a composite frame is without a doubt the most popular door/frame combinations. In fact, you’d be shocked just how well a composite door and uPVC frame complements and supports each other in either alteration. If you’re the type that likes the unmatched levels of insulation, visual appeal as well as security that’s provided by composite doors, fitting this in a UPVC frame is really one that’ll set you apart. This combination is the most loved and for a good reason. You’ll get to open your door with ease while it also remains weathertight, save some money using the usually less costly uPVC frames and ultimately, combine the strengths of both materials incorporated. What’s more? It’s an opportunity for you to make a striking impression on all your visitors.

How Much Is A Metal Front Door?

If you’re looking to get a front door, one of the things you’d want to consider before you proceed is the price of getting the door. As an exterior door, you’ll need something that’s close against weather as well as intrusion. And that’s exactly where steel comes in! It’s a popular choice for exterior door material due to the numerous qualities it possesses. However, the single and precise cost to get a metal front door can not be provided as it depends on a wide array of factors.

The cost to install an average metal front door will depend on the material and finish grade, structural preparation, size, unique needs, labour rate and lots more. Other things you’d have to put into consideration includes the following:

✓ A project to replace more than 2 doors are more likely to enjoy a unit price or bulk discount.

✓ During inspection to replace the existing door with a metal one, there may be some repair concerns like rot and also a need to adapt the existing door opening structure which will also tell on the price

✓ There may be local or national subsidy for energy efficiency improvements.

✓ Taxes and permit fees may also be applicable.

✓ DIY considerations. This project may be suitable for a DIYer with carpentry skills. So if you wish to carry out the installation by yourself that’ll also help you save some money.

Generally, the cost of a metal front door will range between £100 to about £10,000. However, before you purchase a steel door it’s very important to put into consideration what the door is being used for as well as what you’d prioritize between beauty and security - although, most steel doors can offer both at an affordable price.

There are several benefits that can be derived from insulating your garage door. Not only can it reduce your energy bills and protect your garage’s content from elements, but can also go a long way to increase the return on your property’s value, reduce noise, increase the garage door’s strength and deliver a more convenient garage and home. Insulating your garage is a task you can actually take on by yourself. However, if you lack proper training or experience, we’d recommend you leave it for a reliable professional who can ensure the project is done right, the first time - saving you both time and money. This guide will give you a good insight on how you can go about the project.

To insulate your garage, you’ll need a fibreglass insulation, garage door insulation, expanding foam, drywall, gloves and long sleeves, wood, sharp utility knife as well as a staple gun and staples. Now let’s take a look at the garage door insulation process!

lClear The Walls

• Remove the drywall (if present)

• Clean out the dirt and stud cavities.

• Wipe out any chemicals in the garage like gasoline.

lIdentify Gaps & Cracks In The Wall

• Shake your expanding foam vigorously for about a minute.

• Attach the straw to the can and use it to spray the wall openings.

• Fill the gaps until its 50% full

• Leave the foam to fill the openings completely in about 5 to 15 minutes. It should be hardened or completely cured within 6 to 8 hours.

lInstall Fibreglass Insulation

• Staple the insulation’s paper face to the side of the stud and not the face.

• Place a piece of wwod on the insulation’s top to act as a guide to properly cut the insulation to size.

• Cut the excess insulation with a utility knife.

• Tuck in the insulation to make for easier stapling.

• Staple the insulation down to the stud’s side.

lUse Drywall To Cover The Insulation

• Screw and glue the drywall to the stud.

• Do not leave the insulation’s paper exposed.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.

An engineered wooden door is a door made out of multiple pieces of wood. This is opposed to solid wooden doors that are made out of one piece of wood.Engineered wooden doors are usually covered by veneer to make them look like they are made from one piece of wood. They tend to be sturdier and straighter than solid doors.

Unlike several other complex multi choice products, composite door prices are no great mystery. However, it all depends on your personal preferences as well as your budget. There are a variety of customization options and extras, so you can easily select one that’s unique to your home. Composite doors offer you more colours, more styles, a greater choice of accessories as well as more glazing options. With the availability of a plethora of options in the market, it’s very hard to provide a precise price for a composite door as all the options play a significant role in the price structure.

• The Door’s Quality

Composite doors commonly comes with either a CFC-free insulating polyurethane (PU) foam or a laminated hardwood core. The price to be paid will depend on the quality of the composite with the laminated hardwood core being of more quality and ultimately, more expensive.

• Glazing Options

Between a coloured leaded glass double panel and a clear double-glazed panel there’s a huge price difference. And within these two extremes, there are also many other variables.

• Accessories

There are a world of choices when it comes to accessories in terms of the handle styles, letterplates, knockers and more. All playing a role in the price of the composite door.

• Locking System

A common feature of several composite doors is the multi point locking systems. However, the price, choice and security of the lock cylinder can be hugely different which also play a part in the price of the composite door.

• Location

Your geographical location plays an even more important part when you’re having your door installed. For instance, delivery in certain areas in the UK or finding tradesmen comes at a premium which is also shown in the price.

Do I Need A Planning Permission For Bifold Doors?

Are you thinking about installing bifold doors for your home or property? If yes, you’d probably want to know if you’re going to need planning permission. Well, you’re not alone! Being fully aware the application process for planning permission might not be the easiest of tasks, several home owners would like to know if they’ll be going through the process for installing bifold doors. The answer is, you may actually not need a planning permission for installing bifold doors in your home. Adding or replacing doors is basically one of the home improvement efforts that are less complicated and as a result, they normally do not require planning permission. But despite that, they still need to comply with the UK’s building regulations.

Changing or adding doors to your home or property are usually considered to be covered under permitted development and even more so, when there’s no extension constructed for the doors. However under certain circumstances, these rights can be removed by the local authorities. A good example is when the property is a listed building or in a designated conservation area.

In the event whereby you find yourself having to apply for a planning permission, the time it usually takes to be granted one depends on the number of planning applications on queue. However, it typically takes about 8 weeks or 2 months to tender your application and be granted planning permission if it’s required. To apply for planning application by UK households, you’ll have to pay £172 - which is the set application fee nationwide. In certain situations where objection arises, there may be some delays in the process. If you’re still not certain whether your new bifold doors will require a planning permission, we’d recommend consulting your local authority.