Find a Door Fitter you can trust in Altrincham.

If you’re looking to upgrade your home or considering a remodelling project, doors can be a cool and fast way to improve the value of your property. Whether you wish to increase the visual appeal of your home with a new exterior door or simply to alter the appearance of an outdated or plain bedroom or bathroom, doors can also go a long way to improve the look of your home. If you’re thinking about taking on such a project, one of the things you might want to consider is length of time it’ll take to complete the installation process. In this post, we’re going to give you a good insight into the time it takes to complete a door installation process to help you make informed decision moving forward. Let’s take a look!

Just like any home improvement project, the duration of time it’ll take to install doors will depend on a number of factors. These factors include the style/type of door to be installed, the ease of access, the skill and experience of the installer and lots more. In general, replacing an exterior door should, on the average, take about 5 to 6 hours. An interior door, on the other hand, should be much quicker as it doesn’t require same flashing, caulking as well as other weatherproofing processes. In general, the installation of an interior door can be completed within 2 to 4 hours. If you choose to take on this task by yourself, you can expect the duration to be longer due to the little or no experience possessed.

Is your garage door a bit old and outdated? Are you planning to make some renovations? Or perhaps you just want a newer and more stylish garage door, that’s safer and easier to operate, installed. Fitting a garage door can be a bit tricky but it’s not as difficult as you might think. If you’re without proper training or experience, it’s advisable to get in touch with a reliable professional for help in order to guarantee the best results while also saving you both time and money. This guide offers you step by step instructions to assist you in the installation of a new door on our garage.

To get started, the obvious first step is to remove the old garage door. Carefully go through the manufacturer’s instructions to achieve this. Here, you’d basically have to unlatch the door, take apart the door’s panel and unscrew the tracks.

lMeasure, Fit The Hinges & Handles

• Take a measurement of the area in which the door will be fitted

• From the top of opening to ceiling should include a space of about 10 to 12.

• For the length of the garage, you should have the door’s height with about 18 or more space.

• Once done, attach stops to the sides of the opening

• Lay out the bottom piece of the door and include the weather stripping (if you deem fit) using the sawhorses.

lPut The Bottom Piece In Position

• Fit the bottom piece into door frame using a level

• Hit nails partway into each jamb

• Bend the nails slight to secure their position.

• Assemble the vertical, curved and horizontal pieces of the track using the manufacturer’s instruction

lFit The Remaining Panels

• Put the second panel on the first panel

• Use a hammer to hit nails into it

• Fit the hinges.

• Repeat the process for the number of panels required and achor individual piece into the door jamb.

lInstall Rollers

• Fit the rollers in the section’s supports

• Put the rollers in the assembled track and make sure they’re not pressed to tightly against the track to prevent friction.

lSecure Tracks & Fit The Springs

• Fit the curved and horizontal pieces

• Assemble the springs following the manufacturer’s instructions

• Ensure that the tracks are level and parallel by lifting the door to about half length

• Lift the door to cover the distance left and fit the springs to the pulley system

What Is The Best Front Door For Security?

If you’re about to get a new front door for your home, one thing that most homeowners usually put into consideration is the type of door that can guarantee the highest level of security. Your front door is the first line of defence in ensuring the safety of your home. Going past your home’s threshold should deliver an unrivalled feeling of safety and shutting the door behind you should be enough to keep out any unwanted visitors or disturbances. Hence, the reason why the safety and security of your home should be a huge influencing factor to consider when getting a new type of door for your home or property.

In order to achieve this, the material through which your door is produced is the most crucial element that you must take into account when taking a decision. The door’s material is simply everything, it determines the security and safety, durability, appearance and even price.

In addition to avoiding potential front door headaches including warping, expansion and short lifespan, steel doors are simply the type of door that provides the most security and also the most durable. This type of door, when featuring the appropriate mechanisms, can’t be kicked in ( any unwanted visitor who still considers his leg useful wouldn’t even dare) and as result, keeping those you want out, out! They aren’t affected by temperature or the elements as they won’t crack or warp. Asides from this, they can also be designed to suit your taste with any paint or finish to your most preferred style. What’s more? Steel doors don’t require any form of reinforcement and are the most secure option in the market for your front door.

In the past traditional door were usually made from wood and they’re normally good enough at doing the job they were required to do. However, with the advent of far more effective door building materials such as the affordable composites and UPVC, wooden doors are no longer in vogue. Being strong enough to provide the required security for home, low maintenance requirement as well as offering a strong seal and great insulating qualities, both UPVC and composite doors are among the most poplar options available in the market today. So if you’re looking to install a UPVC door in your home or property, you’d probably be wondering how to go about the task. Well, you’ve come to the right place! We’d recommend you hire the services of a professional door installer who can guarantee the best results especially if you lack proper training and experience to complete the job. In this guide, however, you’ll given a good insight into the UPVC door installation process.

• Take the measurement of the entrance to ensure the new door is the right size.

• Remove the old frame and wipe out any old mortar, sealant and any other debris.

• Resting the sill on the brickwork, make use of packers and spirit level to put the new frame in place. Check that the frame is placed the right way with drainage holes at the bottom and also level.

• Once the frame has been successfully put in place, the next line of action is to secure it. To do this, simply drill a hole through the frame. Use a masonry drill through the pilot hole and into the brickwork and ensure a tight fit with the help of packers, then put the anchor into place. Once done, make use of the fixing screw to secure the frame.

• Upon completion, you then have to put the door into place. Make sure the door is toed and heeled so as to avoid unnecessary issues in the future.

There are several benefits that can be derived from insulating your garage door. Not only can it reduce your energy bills and protect your garage’s content from elements, but can also go a long way to increase the return on your property’s value, reduce noise, increase the garage door’s strength and deliver a more convenient garage and home. Insulating your garage is a task you can actually take on by yourself. However, if you lack proper training or experience, we’d recommend you leave it for a reliable professional who can ensure the project is done right, the first time - saving you both time and money. This guide will give you a good insight on how you can go about the project.

To insulate your garage, you’ll need a fibreglass insulation, garage door insulation, expanding foam, drywall, gloves and long sleeves, wood, sharp utility knife as well as a staple gun and staples. Now let’s take a look at the garage door insulation process!

lClear The Walls

• Remove the drywall (if present)

• Clean out the dirt and stud cavities.

• Wipe out any chemicals in the garage like gasoline.

lIdentify Gaps & Cracks In The Wall

• Shake your expanding foam vigorously for about a minute.

• Attach the straw to the can and use it to spray the wall openings.

• Fill the gaps until its 50% full

• Leave the foam to fill the openings completely in about 5 to 15 minutes. It should be hardened or completely cured within 6 to 8 hours.

lInstall Fibreglass Insulation

• Staple the insulation’s paper face to the side of the stud and not the face.

• Place a piece of wwod on the insulation’s top to act as a guide to properly cut the insulation to size.

• Cut the excess insulation with a utility knife.

• Tuck in the insulation to make for easier stapling.

• Staple the insulation down to the stud’s side.

lUse Drywall To Cover The Insulation

• Screw and glue the drywall to the stud.

• Do not leave the insulation’s paper exposed.

A composite door is a valuable investment any homeowner would be glad to make due to its numerous benefits. Not only are they super energy efficient and good looking, but also exceptional when it comes to keeping your house warm and guaranteeing your safety and maximum security. They come in wide range of styles, colours as well as personalization options, which makes them one of the most popular and strongest door you can find in the market today. However, the question that hangs over the mind of many potential investors is how fade resistant are composite doors? Would the visual appeal remain intact for a long period of time or fade away after a few years of exposure to intense sun?

The last thing any homeower would want to see is a priced asset looking dull and tired only after a couple of years after installation. Owners of timber doors worry about having to re paint every couple of years. UPVC door owners worry that their doors can, at times, start to fade when exposed to a strong and intense sunlight. So what exactly do composite door owners worry about? The simple answer is absolutely nothing! Proud composite door owners only have to do a quick wash with a warm soapy water as upkeep for their long lasting and durable asset. This is because composite doors are typically made from Glass Reinforced Plastic outer skin which makes them highly resistant to the element. So whether it’s raining heavily or the sun is shining intensely, the colours of your beloved composite door will not fade and will remain exactly the same way it was when purchased. No matter what the UK weather throws at them, the reinforced plastic skin and robust core ensures the door remains water tight and in top condition always.

How Much Is A Metal Front Door?

If you’re looking to get a front door, one of the things you’d want to consider before you proceed is the price of getting the door. As an exterior door, you’ll need something that’s close against weather as well as intrusion. And that’s exactly where steel comes in! It’s a popular choice for exterior door material due to the numerous qualities it possesses. However, the single and precise cost to get a metal front door can not be provided as it depends on a wide array of factors.

The cost to install an average metal front door will depend on the material and finish grade, structural preparation, size, unique needs, labour rate and lots more. Other things you’d have to put into consideration includes the following:

✓ A project to replace more than 2 doors are more likely to enjoy a unit price or bulk discount.

✓ During inspection to replace the existing door with a metal one, there may be some repair concerns like rot and also a need to adapt the existing door opening structure which will also tell on the price

✓ There may be local or national subsidy for energy efficiency improvements.

✓ Taxes and permit fees may also be applicable.

✓ DIY considerations. This project may be suitable for a DIYer with carpentry skills. So if you wish to carry out the installation by yourself that’ll also help you save some money.

Generally, the cost of a metal front door will range between £100 to about £10,000. However, before you purchase a steel door it’s very important to put into consideration what the door is being used for as well as what you’d prioritize between beauty and security - although, most steel doors can offer both at an affordable price.

More often than not, when we think about replacing our old or existing door with a new unit, we tend to get a bit creative. We think about the panel to use, but often forget about the door’s frame which is just as important. The frame is way beyond an ordinary trimming that serves as a boundary for the slabs, it also ensures the door opens with ease and also sees that heat are being locked in and security is tight. There are a variety of frame options available when fitting a new door, and putting a composite door in a uPVC frame is one. In this article, we’ll give you an idea of the great effects of composite door and uPVC frame combination and help you make informed decision about the best setup that’ll perfectly satisfy all your doorway needs and budget.

Putting a composite door in a uPVC frame or a uPVC door in a composite frame is without a doubt the most popular door/frame combinations. In fact, you’d be shocked just how well a composite door and uPVC frame complements and supports each other in either alteration. If you’re the type that likes the unmatched levels of insulation, visual appeal as well as security that’s provided by composite doors, fitting this in a UPVC frame is really one that’ll set you apart. This combination is the most loved and for a good reason. You’ll get to open your door with ease while it also remains weathertight, save some money using the usually less costly uPVC frames and ultimately, combine the strengths of both materials incorporated. What’s more? It’s an opportunity for you to make a striking impression on all your visitors.