Find a Decorator you can trust in Walkerburn.

Hiring a decorator for your project always seem easy until you get started. With a wide range of decorators available today, it can be quite tricky separating the boys from the men and selecting the right tradesman for your unique project. There are a number of things to put into consideration, questions to ask and lots more to ensure your decorating job is awarded to the right tradesman. In this post, we’re going to give you an insight on some of the essential questions to ask to make sure the prospective decorator is a good match. Let’s take a look!

• What qualifications do you possess? With the pool of decorators around in the industry today, qualifications are needed to help you determine the true specialists. A qualified decorator gives you an assurance (to some extent) that a quality work would be done to your requirements. Decorators, generally, can earn a degree which includes course work in architecture and are also licensed.
• How do you help me identify and communicate my style to you? If you have an idea and know what you want for your space, a good decorator should be able to get it out of you by showing you pictures and asking questions which can vary widely.
• Do you have examples of previous work that are similar to my project in style, scope as well as budget? A decorator that answers yes to this question is a good indicator that they can handle your project. If they don’t, you can ask for pictures of projects they feel is quite similar to yours

Over the years, UPVC spray painting has grown to become a standard practice. Previously, what was done when people wanted to change the colour of their UPVC window is simply to replace the old ones. However compared to the cost of replacing the units, it’s actually a lot easier to simply have your UPVC windows sprayed and even more importantly, at just a fraction of the replacement cost. If you’re thinking about spraying your upvc windows, then you’ve come to the right place! In this post, we’re going to take you through the entire process. However, if you lack the confidence needed to pull this off, we’d strong advise that you get in touch with a professional to avoid make costly errors or mistakes.

The first step to successful upvc window spraying is always to make sure that the upvc is properly cleaned by removing any loose dirt and residue, getting rid of any muck and grime which has developed over the years. You can also abrade the surface in a very light manner to leave upvc frames with a key to make the paint adhesions stronger. Once you’re done with the preparation, the obvious next step is masking off. This process requires you to protect the walls, glass, floors and brickwork from any potential over spray. To achieve this, you can make use of masking papers.

Upon completion of the masking off process, then its time to spray paint the upvc windows using a spray gun and spray painter. This requires a lot of practice as it could be very dangerous as you can inject yourself with paint, which can be seriously fatal.

How To Paint A Room

Painting is a joyful task and it’s quite obvious why it’s one of the most popular DIY projects. Whether you’re painting as an experienced DIYer or as a newbie, this step by step guide will put you in the right direction. However, if you lack the confidence to carry out this task, then we’d recommend you get in touch with a seasoned professional who can guarantee the best results for help. This way, you get to save some time and additional money that would have resulted from possible costly errors.

So just before you head right into the task, there’s the need to determine the type of pain finish you would love to use which is to choose a colour. Now let’s get started!

• Prepare the room

✓ Remove all objects as much as you can from the room and cover the remaining furniture or objects with a sheet.

✓ Fill all holes on the surface to make for an even finish.

✓ Wash the wall with the help of a damp sponge. A sugar soap or diluted washing up liquid will work just fine.

✓ Tape the edges of objects you do not wish to paint like light switches, plug sockets and the likes.

• This step can be skipped if painting on an existing paint, but it’ll advisable to dilute small quantity of your selected paint to patch prime the holes that you’ve filled. If you have a large number of holes that was filled, then priming them would be smart.

• Mix or stir the paint thoroughly in a paint kettle to ensure an even and perfect mix.

• Now you’re ready to start painting! Start from the edges to form like a frame to work within with your roller. Once done, leave for about 4 to 6 hours to dry.

• For the second coat, simply repeat the above step to complete your painting project.

How To Prep Walls For Painting

This is exactly the part of a wall painting job that can make or mar the whole project. To ensure that your paint project doesn’t end up being disastrous, the most important place to start is from room preparation which includes cleaning, sanding as well as priming the walls before painting. Not every wall will require to go through all the preparation steps as all walls are unique and some are in better conditions than others. However, it’s advisable to thoroughly inspect the surfaces before you proceed to painting and take the necessary actions where required.

This is a very simple DIY job that should be completed in little time, however it’s also perhaps the most important step of the entire painting project. Hence, if you lack the confidence to pull this off, then we’d recommend employing a painting expert who can guarantee the best results for help. In this guide, we’ll should you how you can prepare your wall for painting.

✓ Cleaning. There is no single best way to properly clean a wall, but most walls will be just fine with a sponge and warm water. For walls that have been stained with oil or grime such as kitchen walls, you can apply grease cutting detergent and water mixture to wash and follow up with warm water to clean the residues and a damp cloth wiping to finish it off. Then leave to dry off properly.

✓ Remove mildrew. Wipe out mildrew using a sponge and solution that’s three to four parts water to one part bleach. Apply this solution and scrub the affected surface with a soft brush.

✓ Sanding. This step is only meant for walls with rough spots on its surface. Dull the uneven spots with a sandpaper, wipe away the dust and leave to dry. Use a fine grit sandpaper to sand the surfaces and let it dry properly.

✓ Priming. Prime the wall to get the most out of your paint. They work to disguise imperfections and create a smooth surface on which you can work on.

Interior painters and decorators will offer a wide range of services. These range from painting and wallpapering to other decorating jobs such as fitting skirting or architrave. Some painters and decorators will be trained to plaster as well, however, you should always ask them about this and not assume they will all be able to.

There are lots of paints that are suitable for different areas of your property. In general, gloss and eggshell paints should be used in high traffic areas, whereas matte paints are suitable for lower traffic areas. Professional painters and decorators can give you advice on the most suitable types of paints.

How To Paint Exterior Walls

Painting of exterior walls is a value adding task which can be done by any competent DIYer. So if you’re confident enough to pick up a brush and roller, then all you need to do is to follow the instruction in this step by step guide and you’d be glad you did. Painting your exterior walls yourself can save you lots of money that would rather have been spent on hiring the services of a professional painter and decorator. However, if you don’t feel confident enough to pull this off, then it’s advisable to call in a reliable painting specialist who can guarantee the best results for help. Here, we’ll take you through the needed steps to complete the painting of your exterior walls.

✓ Surface Preparation. This involves protecting all fencing and exterior wall component that’s not to be painted with a drop cloth or masking tape. You’ll also need to completely wipe out any dust before you start to paint a plaster surface. If it’s a previously painted wall, you’ll also need degrease it and remove or scrape off any loose areas of the plaster.

✓ Priming. This involves preparing the primer as instructed in the manufacturer’s guide. Then start to prime the surface by using a brush or a small paint roller to prime the corners, little items as well as all surfaces that are difficult to reach. Once done, then you can tackle the larger surfaces using a larger paint roller.

✓ Painting. To start painting your exterior walls, you’d have to prepare the product first by missing it thoroughly as instructed in the manual. Once done, you can repeat the same process as given in the priming stage above using your paint this time. Once done, you can decide to apply a second layer within a minimum of 4 hours after applying the first layer.

What Kind Of Paint To Use On Exterior Brick?

If you’re thinking about painting your exterior brick, you’d probably be wondering the kind of paint that’ll be most suitable for the project. If yes, you’re definitely not alone! Bricks are widely known for being notoriously difficult to paint due to their porousness and can also absorb paint. However, if you’re able to purchase the right type of paint and carefully prepare for your home’s brick exterior, you can make the process a whole lot more easier and cleaner while also giving your home a lot more updated look. It’s usually cheap, appealing and even protects your bricks from the elements which makes it even more durable.

The best type of paint to purchase is the elastomeric paint which provides the highest level of longevity. It’s actually more expensive than acrylic paint but it clearly outworks 100% acrylic paint by double in terms of both effectiveness and efficiency. The elastomeric paint is also super resistant to cold, heat as well as sunlight which makes it perfect for outdoor application. What’s more? It’s also dense enough to fill in cracks in the bricks but in such cases you might need to apply two coats. Overall, if you happen to stay in an inclement weather prone region, an elastomeric paint will help protect your home’s brick surface.

However, if you’re on a tight budget you can also consider getting an acrylic latex paint. This is a lot cheaper than elastomeric paint, but it’s also a great painting option for exterior bricks as it permits moisture to leave the bricks’ surface and helps to prevent mildew. Furthermore, you’ll only need to apply just a coat of acrylic paint.