Find a Decorator you can trust in North East.

Hiring a decorator for your project always seem easy until you get started. With a wide range of decorators available today, it can be quite tricky separating the boys from the men and selecting the right tradesman for your unique project. There are a number of things to put into consideration, questions to ask and lots more to ensure your decorating job is awarded to the right tradesman. In this post, we’re going to give you an insight on some of the essential questions to ask to make sure the prospective decorator is a good match. Let’s take a look!

• What qualifications do you possess? With the pool of decorators around in the industry today, qualifications are needed to help you determine the true specialists. A qualified decorator gives you an assurance (to some extent) that a quality work would be done to your requirements. Decorators, generally, can earn a degree which includes course work in architecture and are also licensed.
• How do you help me identify and communicate my style to you? If you have an idea and know what you want for your space, a good decorator should be able to get it out of you by showing you pictures and asking questions which can vary widely.
• Do you have examples of previous work that are similar to my project in style, scope as well as budget? A decorator that answers yes to this question is a good indicator that they can handle your project. If they don’t, you can ask for pictures of projects they feel is quite similar to yours

In most areas, you will not need planning permission. However, if the property is listed or in a conservation area, you will need listed building consent or planning permission to paint the exterior. A surveyor or architect's advice will be invaluable as they can help with this process.

Over the years, UPVC spray painting has grown to become a standard practice. Previously, what was done when people wanted to change the colour of their UPVC window is simply to replace the old ones. However compared to the cost of replacing the units, it’s actually a lot easier to simply have your UPVC windows sprayed and even more importantly, at just a fraction of the replacement cost. If you’re thinking about spraying your upvc windows, then you’ve come to the right place! In this post, we’re going to take you through the entire process. However, if you lack the confidence needed to pull this off, we’d strong advise that you get in touch with a professional to avoid make costly errors or mistakes.

The first step to successful upvc window spraying is always to make sure that the upvc is properly cleaned by removing any loose dirt and residue, getting rid of any muck and grime which has developed over the years. You can also abrade the surface in a very light manner to leave upvc frames with a key to make the paint adhesions stronger. Once you’re done with the preparation, the obvious next step is masking off. This process requires you to protect the walls, glass, floors and brickwork from any potential over spray. To achieve this, you can make use of masking papers.

Upon completion of the masking off process, then its time to spray paint the upvc windows using a spray gun and spray painter. This requires a lot of practice as it could be very dangerous as you can inject yourself with paint, which can be seriously fatal.

If you happen to possess a upvc door, then you’re likely to notice two main things about about it. Firstly, it’s built to last and will most likely work perfectly well for several more years to come. Lastly, after just a couple of years, it’ll start showing signs of ageing - it starts to fade and becomes dull or discolour which is a problem that’s commonly identified with white plastic after some time and even more so when exposed to the sun and rain year in year out. Unlike back in the days where you’d have to replace your old upvc door due to discolouration, now you’d only have to repaint it which will only cost just a fraction of the price that would have been expended to get a replacement upvc door. By painting your upvc door, you’ll have it looking its best again while also adding to the curb appeal of your home.

Now painting of a upvc door is a very tricky and dangerous affair as it requires a lot of practice and any if proper care is not taken, you can easily inject yourself with paint. As a result, if you lack the skill or confidence required to carry out this task, then we’d strongly recommend you get in touch with a professional who can guarantee the best results the first time. If you wish to paint your upvc door, here are the four simple steps to it:

1. Remove any door furniture
2. Prepare the upvc door for the painting
3. Select a paint that’ll work on upvc doors
4. Decide on the finishing touches

How To Prep Walls For Painting

This is exactly the part of a wall painting job that can make or mar the whole project. To ensure that your paint project doesn’t end up being disastrous, the most important place to start is from room preparation which includes cleaning, sanding as well as priming the walls before painting. Not every wall will require to go through all the preparation steps as all walls are unique and some are in better conditions than others. However, it’s advisable to thoroughly inspect the surfaces before you proceed to painting and take the necessary actions where required.

This is a very simple DIY job that should be completed in little time, however it’s also perhaps the most important step of the entire painting project. Hence, if you lack the confidence to pull this off, then we’d recommend employing a painting expert who can guarantee the best results for help. In this guide, we’ll should you how you can prepare your wall for painting.

✓ Cleaning. There is no single best way to properly clean a wall, but most walls will be just fine with a sponge and warm water. For walls that have been stained with oil or grime such as kitchen walls, you can apply grease cutting detergent and water mixture to wash and follow up with warm water to clean the residues and a damp cloth wiping to finish it off. Then leave to dry off properly.

✓ Remove mildrew. Wipe out mildrew using a sponge and solution that’s three to four parts water to one part bleach. Apply this solution and scrub the affected surface with a soft brush.

✓ Sanding. This step is only meant for walls with rough spots on its surface. Dull the uneven spots with a sandpaper, wipe away the dust and leave to dry. Use a fine grit sandpaper to sand the surfaces and let it dry properly.

✓ Priming. Prime the wall to get the most out of your paint. They work to disguise imperfections and create a smooth surface on which you can work on.

You should always wait until plaster is dry before painting. The time this will take varies depending on the room and property, but in general, it will take about a week. Your plasterer will tell you how long it is best to leave it before covering or painting their work.

How To Paint Exterior Walls

Painting of exterior walls is a value adding task which can be done by any competent DIYer. So if you’re confident enough to pick up a brush and roller, then all you need to do is to follow the instruction in this step by step guide and you’d be glad you did. Painting your exterior walls yourself can save you lots of money that would rather have been spent on hiring the services of a professional painter and decorator. However, if you don’t feel confident enough to pull this off, then it’s advisable to call in a reliable painting specialist who can guarantee the best results for help. Here, we’ll take you through the needed steps to complete the painting of your exterior walls.

✓ Surface Preparation. This involves protecting all fencing and exterior wall component that’s not to be painted with a drop cloth or masking tape. You’ll also need to completely wipe out any dust before you start to paint a plaster surface. If it’s a previously painted wall, you’ll also need degrease it and remove or scrape off any loose areas of the plaster.

✓ Priming. This involves preparing the primer as instructed in the manufacturer’s guide. Then start to prime the surface by using a brush or a small paint roller to prime the corners, little items as well as all surfaces that are difficult to reach. Once done, then you can tackle the larger surfaces using a larger paint roller.

✓ Painting. To start painting your exterior walls, you’d have to prepare the product first by missing it thoroughly as instructed in the manual. Once done, you can repeat the same process as given in the priming stage above using your paint this time. Once done, you can decide to apply a second layer within a minimum of 4 hours after applying the first layer.

How To Paint A Radiator

First thing you should know about painting a radiator is that normal paints can’t be used to do the job, however that doesn’t mean it’s not cheap, easy and fun - it definitely is and even more so, when you do it the right way. With a few radiator painting hints here, it’s only a matter of time before you start painting your radiators every colour of the rainbow delightfully.

Painting a radiator is not one of the most common tasks on most people’s to do list, so we’ve created this article as an encouraging nudge to allow more people let their creativity manifest through a brush. However, this is not to say that this is a task for everyone though as you won’t like to make a mess of your radiator. If you know you can’t pick up a brush or bend a knee or your back here and there, then you probably shouldn’t. In such cases, hiring a professional painter would be your best bet to get the best results while also saving yourself some time and money.

To paint a radiator, you’ll need a paint brush, suitable radiator paint, dust sheet and a radiator paint brush (optional).

✓ Turn off the radiator and leave it to cool off. Once it’s cold, simply wipe out all dust, dirt or grease from the radiator.

✓ Protect the flooring under the radiator from any paint splatter with a by spreading out a dust cloth.

✓ Use a suitable radiator paint to brush out well and lay off evenly in a direction. Leave it to dry overnight. Then apply paint on the radiator in direction of the grooves with the help of a top quality brush.

✓ Paint in sections and move across the radiator slightly overlapping until you get to the end. The move to paint the other areas.

✓ Leave the paint to dry as instructed in the manufacturer’s instructions, then apply a second coat if necessary.