Find a Decorator you can trust in Greater London.

Hiring a decorator for your project always seem easy until you get started. With a wide range of decorators available today, it can be quite tricky separating the boys from the men and selecting the right tradesman for your unique project. There are a number of things to put into consideration, questions to ask and lots more to ensure your decorating job is awarded to the right tradesman. In this post, we’re going to give you an insight on some of the essential questions to ask to make sure the prospective decorator is a good match. Let’s take a look!

• What qualifications do you possess? With the pool of decorators around in the industry today, qualifications are needed to help you determine the true specialists. A qualified decorator gives you an assurance (to some extent) that a quality work would be done to your requirements. Decorators, generally, can earn a degree which includes course work in architecture and are also licensed.
• How do you help me identify and communicate my style to you? If you have an idea and know what you want for your space, a good decorator should be able to get it out of you by showing you pictures and asking questions which can vary widely.
• Do you have examples of previous work that are similar to my project in style, scope as well as budget? A decorator that answers yes to this question is a good indicator that they can handle your project. If they don’t, you can ask for pictures of projects they feel is quite similar to yours

The quick and simple answer to this question is yes, you can definitely spray paint your garage door - be it timber, metal, composite or upvc. However, the major concern of most home or property owners about a painted finish is whether it’ll become vulnerable to wear and tear or resist it. Will the paint easily peel off at the slightest provocation or will it stand up to abrasion? The questions goes on and on. The answer to the questions showing concerns about the longevity of a painted finish depends largely on the quality of the application.

For a successful and effective spray painting project, there’s the need to prepare the surface. There some materials that’ll require priming, be it a special primer or a thinned version of the paint. There are also some surfaces that’ll need some light sanding. Overall, the primary aim of preparation is to provide a clean and ideal surface for the paint to bond to. This is the most important factor that determines whether the finish is going to last or not.

Painting your garage door can either be done as a DIY task or you can probably hire the services of a professional. To paint the garage door yourself, you can’t buy the same equipment as a professional firm, but you can as well use a brush. This option will leave brush marks especially on metal and upvc garage doors which makes it not so appropriate if you want to have a smooth and even finish. Professional companies are highly recommended for this type of project as they possess the experience and knowledge and skills required to deliver a top quality job that’ll help obliterate all concerns you might have about its longevity.

The quick and simple answer to this question is yes, you can definitely spray upvc window with a different colour. In fact, this represents a much more cost effective mean of changing the upvc windows colour. Back in the days people used to simply replace their upvc windows, doors, fascias, gutters, garage door conservatories and the likes which is actually a much costlier option.

Generally, upvc window frames are known to have a lengthy lifespan, however the common misconception is that the colour you pick originally and install is the colour you’d have to keep till you have them replaced. Typically, people will have white upvc windows, however in recent times there has been more colours coming on in the market such as anthracite grey, black, brown and many more when it comes to replacing. However, replacing your upvc window frames come with a greater associated expenses, building works, a lot of hassle as well as mess. As a result, there has been a significant increase in the number of people looking for upvc painting and recoloring as this costs a lot less than replacing existing frames up to 80% in several cases. From the savings that’ll be made by spraying and painting upvc window frames, it makes absolutely little sense replacing the frames. Therefore, it’s highly recommended to have your upvc windows sprayed and painted by an experienced professional who can guarantee the best results the first time.

If you happen to possess a upvc door, then you’re likely to notice two main things about about it. Firstly, it’s built to last and will most likely work perfectly well for several more years to come. Lastly, after just a couple of years, it’ll start showing signs of ageing - it starts to fade and becomes dull or discolour which is a problem that’s commonly identified with white plastic after some time and even more so when exposed to the sun and rain year in year out. Unlike back in the days where you’d have to replace your old upvc door due to discolouration, now you’d only have to repaint it which will only cost just a fraction of the price that would have been expended to get a replacement upvc door. By painting your upvc door, you’ll have it looking its best again while also adding to the curb appeal of your home.

Now painting of a upvc door is a very tricky and dangerous affair as it requires a lot of practice and any if proper care is not taken, you can easily inject yourself with paint. As a result, if you lack the skill or confidence required to carry out this task, then we’d strongly recommend you get in touch with a professional who can guarantee the best results the first time. If you wish to paint your upvc door, here are the four simple steps to it:

1. Remove any door furniture
2. Prepare the upvc door for the painting
3. Select a paint that’ll work on upvc doors
4. Decide on the finishing touches

How To Prep Walls For Painting

This is exactly the part of a wall painting job that can make or mar the whole project. To ensure that your paint project doesn’t end up being disastrous, the most important place to start is from room preparation which includes cleaning, sanding as well as priming the walls before painting. Not every wall will require to go through all the preparation steps as all walls are unique and some are in better conditions than others. However, it’s advisable to thoroughly inspect the surfaces before you proceed to painting and take the necessary actions where required.

This is a very simple DIY job that should be completed in little time, however it’s also perhaps the most important step of the entire painting project. Hence, if you lack the confidence to pull this off, then we’d recommend employing a painting expert who can guarantee the best results for help. In this guide, we’ll should you how you can prepare your wall for painting.

✓ Cleaning. There is no single best way to properly clean a wall, but most walls will be just fine with a sponge and warm water. For walls that have been stained with oil or grime such as kitchen walls, you can apply grease cutting detergent and water mixture to wash and follow up with warm water to clean the residues and a damp cloth wiping to finish it off. Then leave to dry off properly.

✓ Remove mildrew. Wipe out mildrew using a sponge and solution that’s three to four parts water to one part bleach. Apply this solution and scrub the affected surface with a soft brush.

✓ Sanding. This step is only meant for walls with rough spots on its surface. Dull the uneven spots with a sandpaper, wipe away the dust and leave to dry. Use a fine grit sandpaper to sand the surfaces and let it dry properly.

✓ Priming. Prime the wall to get the most out of your paint. They work to disguise imperfections and create a smooth surface on which you can work on.

If you’re thinking about spraying your upvc, then one of the first things that naturally comes to mind is the price of completing such a task. If you’re also interested in determining the price, then you’ve come to the right place! In this post, we’re going to take a look at the total cost involved in UPVC spraying.

First and foremost, it must be stated that UPVC spraying is an industry that’s highly competitive. And as you would have guessed the prices are largely influenced the experience and reputation of the company you opt for. In other words, the new entrant companies are usually the cheapest but their works are not particularly the best. Therefore, for a high quality job, it’s always recommended to make use of a well established and highly reputable company in the industry.

If you’re going to hire a vastly experienced and reputable firm in the industry, then you should budget about circa £140 to £160 per window, circa £210 to £250 per door and frame, circa £260 to £300 for a large garage door and circa £600 to £800 for a three bed semi detached house.

These prices include materials, labour as well as other related costs. However, you should note that they’re only estimated prices and you’ll have to call in a professional in order to get a more accurate quote. If you’re looking to paint all the UPVC in your home, there are usually discounts that will be provided based on the work load. What’s more? If there’s a need for scaffolding, then there can be a bump up in the price.

Over the years, UPVC spray painting has grown to become a standard practice. Previously, what was done when people wanted to change the colour of their UPVC window is simply to replace the old ones. However compared to the cost of replacing the units, it’s actually a lot easier to simply have your UPVC windows sprayed and even more importantly, at just a fraction of the replacement cost. If you’re thinking about spraying your upvc windows, then you’ve come to the right place! In this post, we’re going to take you through the entire process. However, if you lack the confidence needed to pull this off, we’d strong advise that you get in touch with a professional to avoid make costly errors or mistakes.

The first step to successful upvc window spraying is always to make sure that the upvc is properly cleaned by removing any loose dirt and residue, getting rid of any muck and grime which has developed over the years. You can also abrade the surface in a very light manner to leave upvc frames with a key to make the paint adhesions stronger. Once you’re done with the preparation, the obvious next step is masking off. This process requires you to protect the walls, glass, floors and brickwork from any potential over spray. To achieve this, you can make use of masking papers.

Upon completion of the masking off process, then its time to spray paint the upvc windows using a spray gun and spray painter. This requires a lot of practice as it could be very dangerous as you can inject yourself with paint, which can be seriously fatal.

How To Paint A Room

Painting is a joyful task and it’s quite obvious why it’s one of the most popular DIY projects. Whether you’re painting as an experienced DIYer or as a newbie, this step by step guide will put you in the right direction. However, if you lack the confidence to carry out this task, then we’d recommend you get in touch with a seasoned professional who can guarantee the best results for help. This way, you get to save some time and additional money that would have resulted from possible costly errors.

So just before you head right into the task, there’s the need to determine the type of pain finish you would love to use which is to choose a colour. Now let’s get started!

• Prepare the room

✓ Remove all objects as much as you can from the room and cover the remaining furniture or objects with a sheet.

✓ Fill all holes on the surface to make for an even finish.

✓ Wash the wall with the help of a damp sponge. A sugar soap or diluted washing up liquid will work just fine.

✓ Tape the edges of objects you do not wish to paint like light switches, plug sockets and the likes.

• This step can be skipped if painting on an existing paint, but it’ll advisable to dilute small quantity of your selected paint to patch prime the holes that you’ve filled. If you have a large number of holes that was filled, then priming them would be smart.

• Mix or stir the paint thoroughly in a paint kettle to ensure an even and perfect mix.

• Now you’re ready to start painting! Start from the edges to form like a frame to work within with your roller. Once done, leave for about 4 to 6 hours to dry.

• For the second coat, simply repeat the above step to complete your painting project.