Find a Decorator you can trust in Ravenglass.

Hiring a decorator for your project always seem easy until you get started. With a wide range of decorators available today, it can be quite tricky separating the boys from the men and selecting the right tradesman for your unique project. There are a number of things to put into consideration, questions to ask and lots more to ensure your decorating job is awarded to the right tradesman. In this post, we’re going to give you an insight on some of the essential questions to ask to make sure the prospective decorator is a good match. Let’s take a look!

• What qualifications do you possess? With the pool of decorators around in the industry today, qualifications are needed to help you determine the true specialists. A qualified decorator gives you an assurance (to some extent) that a quality work would be done to your requirements. Decorators, generally, can earn a degree which includes course work in architecture and are also licensed.
• How do you help me identify and communicate my style to you? If you have an idea and know what you want for your space, a good decorator should be able to get it out of you by showing you pictures and asking questions which can vary widely.
• Do you have examples of previous work that are similar to my project in style, scope as well as budget? A decorator that answers yes to this question is a good indicator that they can handle your project. If they don’t, you can ask for pictures of projects they feel is quite similar to yours

You should always wait until plaster is dry before painting. The time this will take varies depending on the room and property, but in general, it will take about a week. Your plasterer will tell you how long it is best to leave it before covering or painting their work.

How To Paint Exterior Window Sills And Frames?

Painting your exterior window sills and frames can be a very joyful and fun-filled activity if you know what you’re doing. It’s a task that can be completed in little time by an experienced DIYer, however if you do not have the confidence to pull off this project, then you’d be better off calling in a professional for help to avoid costly mistakes. In this guide, we’ll take you through the exterior window sills and frames painting process.

✓ Prepare the window sills and frames. This includes, brushing the surfaces with warm water and gentle soap, scrubbing the windows to ensure all the edges and cracks are free from all forms of dirt, rinsing it with water and use a soft, clean cloth to wipe off any excess liquid and finally, drying it off with a towel or leaving it to dry off by itself before you start to paint.

✓ Remove any signs of moulds and moss, fill in the cracks between frame and glass using a multi-purpose filler, sand the frame and wipe out any dirt or dust on or around it using a vacuum cleaner, a clean cloth or soft brush. Once done, you can then apply a coat of water-based primer and let it dry off before painting.

✓ Painting. Firstly, you’ll have to sand your primed windows to make an even, smooth surface and apply an undercoat evenly to the surface. Once completed, you can then apply at least 2 coats of paint using a quality brush. Make sure you sand the first layer carefully before you apply the second to get a great finish.

✓ Once dried, you can the finish with a top coat (make sure you go for a weather proof paint for the exterior). For the window sills, you’ll have to apply the exterior paint gently with masking tape around the edges to protect the walls from the dripping paint.

If you happen to possess a upvc door, then you’re likely to notice two main things about about it. Firstly, it’s built to last and will most likely work perfectly well for several more years to come. Lastly, after just a couple of years, it’ll start showing signs of ageing - it starts to fade and becomes dull or discolour which is a problem that’s commonly identified with white plastic after some time and even more so when exposed to the sun and rain year in year out. Unlike back in the days where you’d have to replace your old upvc door due to discolouration, now you’d only have to repaint it which will only cost just a fraction of the price that would have been expended to get a replacement upvc door. By painting your upvc door, you’ll have it looking its best again while also adding to the curb appeal of your home.

Now painting of a upvc door is a very tricky and dangerous affair as it requires a lot of practice and any if proper care is not taken, you can easily inject yourself with paint. As a result, if you lack the skill or confidence required to carry out this task, then we’d strongly recommend you get in touch with a professional who can guarantee the best results the first time. If you wish to paint your upvc door, here are the four simple steps to it:

1. Remove any door furniture
2. Prepare the upvc door for the painting
3. Select a paint that’ll work on upvc doors
4. Decide on the finishing touches

How To Prep Walls For Painting

This is exactly the part of a wall painting job that can make or mar the whole project. To ensure that your paint project doesn’t end up being disastrous, the most important place to start is from room preparation which includes cleaning, sanding as well as priming the walls before painting. Not every wall will require to go through all the preparation steps as all walls are unique and some are in better conditions than others. However, it’s advisable to thoroughly inspect the surfaces before you proceed to painting and take the necessary actions where required.

This is a very simple DIY job that should be completed in little time, however it’s also perhaps the most important step of the entire painting project. Hence, if you lack the confidence to pull this off, then we’d recommend employing a painting expert who can guarantee the best results for help. In this guide, we’ll should you how you can prepare your wall for painting.

✓ Cleaning. There is no single best way to properly clean a wall, but most walls will be just fine with a sponge and warm water. For walls that have been stained with oil or grime such as kitchen walls, you can apply grease cutting detergent and water mixture to wash and follow up with warm water to clean the residues and a damp cloth wiping to finish it off. Then leave to dry off properly.

✓ Remove mildrew. Wipe out mildrew using a sponge and solution that’s three to four parts water to one part bleach. Apply this solution and scrub the affected surface with a soft brush.

✓ Sanding. This step is only meant for walls with rough spots on its surface. Dull the uneven spots with a sandpaper, wipe away the dust and leave to dry. Use a fine grit sandpaper to sand the surfaces and let it dry properly.

✓ Priming. Prime the wall to get the most out of your paint. They work to disguise imperfections and create a smooth surface on which you can work on.

Your painter and decorator will carry out most of the preparation work for your project. You can help them by ensuring that the area is clean and tidy. Also, remove as many personal items and pieces of furniture from the area as possible and make sure all your internal doors are firmly closed just in case of dust from rubbing down.

How To Prepare Exterior Walls For Painting?

For a great and smooth exterior finish, preparing the walls before painting is crucial. A great painting job melts the heart and even more so if its done by you. This is a relatively easy task that can be completed without much hassle by an expert DIYer. However if you lack the needed confidence to pull off your exterior wall painting preparation task, then hiring the services of a reliable professional who can guarantee the best result would be your best bet. In this step by step, we aim to take you through the steps involved in preparing exterior walls for painting.

Before you get started, you need to make sure you have the necessary tools in place. These includes a filler and filling knife, sandpaper, soap, sponge, wide paint brush, masking tape as well as drop sheets.

✓ Ensure a smooth surface with a filer and sanding. This includes removing and replacing any rotten or decaying timer, proper sanding as needed, scraping off of peeling areas with sanding and filling of cracking areas with the help of exterior grade filler. Once the above is completed, you can then proceed to filling any holes or cracks in your exterior surface with a top quality exterior filler ( the application should be done with a putty knife).

✓ Cleaning. With the help of a quality and soft brush, clear out the dirt and cobwebs on the exterior’s surface. Then wash the walls with a good detergent to remove any remaining dirt and grease. You can use a bristled brush and a high pressure cleaner to make the process easier.

✓ Mask the area. This involves using a top quality masking tape along the edges you do not wish to paint and pushing the tape’s edges down firmly in such a way to get straight edges.

How To Paint Exterior Door?

The front or exterior door is an excellent way to add to your house’s visual appeal. You choose to add a little style, think outside the norm and stand out in a lot of ways.

The front door or exterior door is what your guests are going to first come in contact with and can go a long way to shape their impression about you. It’s also one of the very things that grabs attention when looking at a house from a distance. So if you’re going to paint it yourself, you should know there’s no room for errors. However, if you’re not confident enough then we’d recommend you hire the services of a reliable professional who can guarantee the best results for help. Here’s some top painting advice aimed at helping you getting the project done in a quick and easy manner.

✓ Prepare the front door. Detach the doors from the hinges ( you may decide not to completely detach the door). However, there’s the need to tape off and protect the exposed hardware or windows if you won’t be detaching the door completely before painting.

✓ Start to paint the front door. Use a brush to run along the taped area to create a frame in which the roller can easily work in. What’s more? If the exterior door is metal or fibreglass, you can create a more natural look by painting in the direction that would be on a wood door.

✓ To fill and refine your front door painting, you can simply roll the paint directly on the surface for a flat one-panel door. However, if it’s a panelled door, then you’ll have to first make use of your brush to paint the inlaid regions before using the roller on the flat, outer regions.