Find a Conservatory Installer you can trust in Horley.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

There are several reasons why an aluminium conservatory installation is a great way to expand your home.

Firstly, it’s strong and durable. This means that as well as providing you with a conservatory that’s more secure, this frame material will also last longer and cope with harsher weathering that wooden or uPVC conservatories.

Aluminium also offers more design possibilities. It can be bent into custom shapes, making it ideal if you want to create a unique, stylish home extension. It comes in a wide range of colours, so you can coordinate it with your existing property.

An aluminium conservatory installation can also help you maximise light in your home. They have very thin frames compared to wood and uPVC, so they’re a great choice if you want to let in as much daylight as possible.

Due to temperature changes, conservatory window seal expand and contract over time which may lead to them wearing out eventually. If you’re facing a similar issue with your conservatory window seal, then you’d probably want to know how you can go about the repair. If yes, then you’ve come to the right place! In this post we’re going to take you through the conservatory window seal repair process. Let’s take a look!

First and foremost, let consider how to determine if your windows needs to be resealed. This is a very simple procedure as a visual check can help identify whether or not the window needs to be resealed. Simply watch out for the area where the windows meets with the frame as well as the point where various sections of windows meet with one another. You should observe whether there’s an obvious sign of wear and tear, gaps and cracks in the seal. If any is found, then your conservatory window seal will have to be repaired as soon as possible. Another important indicator is a draught coming from the window area or visible condensation signs on internal panels of the glass panes.

When it comes to the resealing of windows, it’s highly recommended that you call in a professional. However, if you wish to carry out the task by yourself as an experienced DIYer, then it would be wise to take extra caution. If done the wrong way, this is likely to generate further issues along the road while also allowing more heat to escape your conservation

So have you are considering having a David Salisbury orangery in your home? It’s a stylish and visually appealing extension which adds immense value to your property when it comes to resale. Almost every home buyer wants a house with a nice orangery and even more so, if it’s a David Salisbury orangery. However, the cost of constructing a David Salisbury orangery is dependent on a wide range of factors which includes your location ( within the UK), the size of the building, the orangery style in question, the materials to be incorporated as well as the finish you’re expecting to get.

Typically, to construct a David Salisbury orangery, you’d need to spend a sum between £10,000 to £70,000. This differences in price is based on the influences that have been stated earlier which includes the type as well as size of the selected David Salisbury orangery. If you wish to construct the small David Salisbury orangery featuring a uPVC frame, you can get that done at a price not less than £10,000, but this price can cost up to £60,000 or even more if you want a large, timber-framed orangery built. Meanwhile if you prefer a premium quality and timber-framed David Salisbury orangery that comes with a new fitted kitchen, it may cost up to £70,000 in expenses (when you add the price of the new kitchen units as well as appliances).

The finish you want to achieve is also one of the greatest influential factors that determines the cost of your David Salisbury orangery. For just the bare essentials (low end), the cost is between £10,000 to £20,000, meanwhile the cost for the mix of both basic and personalized items is within a range of £20,000 to £40,000. However, if you want a classy and distinctive David Salisbury orangery with superior quality fixtures and fittings, a more accurate cost estimate will range between £35,000 to £60,000.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

With the ability of orangeries to create additional space in your home as well as altering the appearance of your property completely, it’s very likely you’ll require a planning permission to construct an orangery. However, with the lengthy and complicated application process, you might want to consider the few exemptions before getting started.

If you’re considering to build an home extension such as an orangery, the obvious first step would be to consider whether or not you’ll need planning permission. And while you tend to get carried away in the thought of adding new beautiful living space, you should never forget to take into account your area’s planning regulation as well as the planning process realities. However, the application process is not one of the most exciting activities any homeowner would like to pass through and even more so when they live in a conservation area or possess a listed property that can even make the process a lot more challenging.

It’s recommended that you consult your plans and ideas with a professional such as an architect, building design company or a chartered surveyor, but there are some options you can put into consideration if you want to avoid the applying for a planning permission.

If you’re sure about not wanting to apply for a planning permission, you’d have to check your area to identify the possible local planning implications and determine whether or not your home has permitted development right which allows for some building works that can be made without the need to apply for a planning permission. To do this, simply check the government’s planning portal to determine whether your project is covered by the permitted development rights or applying for a planning permission would be required. What’s more? You need to determine if your building is listed especially if you live in a period property. For listed building, it can be much more difficult to get a planning permission as you must comply with some very specific regulations.

When it comes to boosting the value of a property, there are a bunch of home improvements one can make to increase a property’s value. One of these improvements that can add to both the value as well as saleability of a home is a lean to conservatory. So exactly how much value does a conservatory add?

According to several studies carried out, a lean to conservatory should add anything within the range of 7% to 15% of the average property value in the UK. This equals thousands of pounds which ultimately translates that home and property owners can recoup some or even all of their cost of investment in the extension with relative ease. However, in order to determine the exact value added, you’d have to calculate the value of your investment. These includes determining the amount of money the lean to conservatory will cost including installation, the current value of your property as well as the amount of value the conservatory will add to your property. Doing this will help you determine how wise the investment in a lean to conservatory will be.

At present, the average price in the UK stands at about £240,000 and according to the experts, lean to conservatory should add with the range of 7 percent or 10 percent of that price in terms of value. In other words, the value of your property can rise by close to £17000. And if the total cost of building the lean to conservatory is about £9000, that means you’ve made a profit of up to £8,000. Besides this, there are also some other significant values and benefits offered by installing a lean to conservatory which includes more living space, aesthetic appeal and many more.

How Long Do UPVC Conservation Last?

UPVC conservatories are common features on residences across the UK for a good reason. Not only do they give you the extra living space you so much desire within your home or property, but they also go a long way to add value to your property. So if you’re also thinking about constructing a UPVC conservation within your home, you’re probably not alone! One of the several benefits of the structure is also its longevity, however this is dependent on a number of factors. Let’s take a closer look!

Modern UPVC windows will normally last between 20 to 25 years, however some are able to last much longer provided they’re properly maintained and top quality materials are used. And thanks to improvements in colour technology, the finish on UPVC tends to last much longer too.

Some of the factors that can go a long way to determine the longevity of your UPVC conservation includes the type of roofing materials used, how well it’s being maintained, the location or placement of the structure, replacement of individual conservatory parts, as well as insulation.

The type of roofing material for a UPVC conservation can either be glass, polycarbonate or tiles. The glass and polycarbonate roofs usually lasts for a minimum of 20 years when it’s properly installed and provided with the necessary upkeep. Meanwhile, tiled UPVC conservation roof are generally expected to last up to 50 years which is significantly longer than the counterparts - glass and polycarbonate. Interestingly, they require little to no maintenance and are also very unlikely to get damaged during the upkeep.

It’s also very important to make use of a reliable and reputable company to have your UPVC conservatory installed. This is because your structure can only be as good as the company responsible for its installation. So if you require a structures that will last for decades, you should pay great attention to the company you’ll hire.