Find a Conservatory Installer you can trust in Towcester.

If you’ve ever looked into different types of conservatories, you’ll see that wooden conservatories are not the cheapest. However, that’s not a reason to dismiss them as an option for your home.

Wooden conservatories can cost anywhere between £15,000 to £60,000. While this may seem expensive, they are often a much classier option for your home and are ideal for period homes and those in a conservation area where uPVC might not be permitted.

If you choose a hardwood conservatory, you could see your conservatory last over 15 years. Most uPVC conservatories will only last around this time, and as they get old they can look shabby; it’s common for the frames to discolour in the sun. With good maintenance, wooden conservatories can look fabulous for years. Wood naturally retains heat too, so ensure that you use low-e internal glass which reflects heat back into the room and you’ll have as warm a conservatory as any.

When you weigh up all of the pros and cons of uPVC conservatories compared with wooden ones, you might come to the conclusion that wooden conservatories aren’t that expensive when it boils down to it. Although the initial cost is higher, you’ll get a better-looking conservatory that works with both modern and period properties and will look elegant and tasteful for years to come.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

How To Build A Conservatory

Conservatories are a perfect means of creating an extra living space within your home. They can serve various purposes which includes serving as an avenue to entertain guests, a playroom for the kids and can even be used as a home office, they’re able to open up your property without having to break the bank for the highly expensive renovations. So if you wish have a conservatory constructed in your home, it’s either you do it yourself or hire a professional. Doing it yourself will help you save some money but can also end up disastrous. So if you lack the confidence to undertake this project by yourself, then it’s strongly recommended that you hire a professional who can guarantee the best results. In this guide, you’ll discover all steps required to build your own conservatory.

✓ The Base. Due to its durability and cost, concrete happens to be the most used material for conservatory’s base. Firstly, measure the enough area to accommodate the conservatory. Dig at least 1 metre deep and ensure it’s level. Fill with damp membrane and pour your concrete mixture in evenly till it reaches level ground. Once done, make sure that the base is totally dry before erecting the conservatory

✓ Building. Basically you can start by constructing the walls and ensure that they’re sturdy and secure, putting into consideration their measurement.

✓ Roofing. Good news here is, DIY conservatories will already come with the roofing in place, so you won’t have to bother about this stage when building. They usually come with an acrylic roof which is easy to install and maintain.

✓ Flooring & Finishings. Starting from the roof, ensure that there’s sealant on all areas where air can pass through. For the flooring, you’ll have to choose your patio slabs or tiles to go outside of the structure. You can apply these with a thin layer of concrete or onto screed flooring.

Do You Need Planning Permission For A Conservatory?

Adding a conservatory to your home or property comes with a whole lot of benefits. It provides you with the much needed additional living space within your property, add value to your home and creates a link between your home and garden. As advantageous as it is, one of the major reasons why some homeowners decide against constructing a new conservatory is because of planning permission. If you don’t know what you’re doing the entire process can be very tedious and you definitely do not want to go through the stress of completing your remarkable new conservatory, only to be instructed to have it removed again.

Therefore, as a homeowner, you have the responsibility to seek planning permission before you undergo such construction project and that’s more than enough to make some people reconsider the whole project. In this article, we’ll let you know whether you’ll need to apply for a planning permission.

Generally, conservatories falls into the category of permitted development rights which allows you to complete home building projects without having to apply for a planning permission. However, there are some circumstances where you’ll require a planning permission. These includes:

✓ If the conservatory covers more than 50 percent of the land around the main house.

✓ If the conservatory will be placed on the side of the house that faces the road.

✓ If the conservatory will be higher than the highest point of the main building’s roof.

✓ If the main building is lower than the height of the eaves and ridge.

✓ If the conservatory will be constructed to the side of the house and more than a single storey or it goes higher than 4 metres.

✓ If the conservatory will be wider than the width of the main building, if it’s to be built beside it.

✓ If the conservatory will be constructed at the rear and higher than 4 metres.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!

If you’re planning to build an orangery extension on your property, then it only makes sense to estimate the possible cost before getting started. However, like several other home improvement projects, the cost of building an orangery extension is based on a wide array of factors such as your location ( within the UK), the size of the building, the orangery style in question, the materials to be incorporated as well as the finish you’re expecting to get.

Generally, to build an orangery, you’d have to spend within a range of £10,000 to £70,000. This variations in price depends on the factors earlier mentioned such as the type and size of the selected orangery. For a small orangery featuring a uPVC frame, you can get that done for nothing less than £10,000, but the price can jump to £60,000 or more if you want a large, timber-framed orangery built. For a superior quality, large and timber-framed orangery featuring a new fitted kitchen, you’d have to incur up to £70,000 in expenses (when you add the price of the new kitchen units as well as appliances).

The finish you want to achieve is one of the most influential factors determining the price of your orangery. If you want just the bare essentials (low end), the price ranges from £10,000 to £20,000, meanwhile the price for a blend of both basic and customized items ranges between £20,000 to £40,000. However, if you have a high taste and looking to get the best possible orangery with all fixtures and fittings of great quality, you’d have to spend between £35,000 to £60,000.

Furthermore, orangery’s cost will also be affected by how you wish to make use of the space, meaning an extra work may be required. This must also be taken into consideration to get a more accurate estimation of the cost.