Find a Conservatory Installer you can trust in Skipton.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

Generally, if you want to do a job, you can as well ensure that’s done properly. You may be considering building a small base for an orangery, but no matter how small it is, it just shouldn’t be done to any other than a compliant standard, and that’s whether or not an approval is needed. When it comes to building work which is covered by Building Regulations, you are required to comply (by the law) with the regulations and to make use of one of the two types of Building Control Service available. These includes the Building Control Service given by your local authority or the Building Control Service given by approved inspectors.

Regardless of the service you opt for, you’re going to pay but the preferred service may offer an advice before commencement of the project. The individual carrying out the building work is charged with the responsibility of ensuring total compliance with the regulations. Therefore, if you select to undertake the project by yourself, the responsibility is primarily on you. In the same vein, if you opt for a building company the responsibility would be the company’s, but you should always ensure to confirm this position before commencement of the project. You must also take note that you may be served with an enforcement notice if you fail to comply with the regulations as the owner of the building. So it’s advisable that you choose your builder very carefully.

There are a bunch of elements you may require approval for like the structural integrity, appropriate insulation levels, or the construction of a building over drainage or sewage. In cases where it’s obvious that you’d need building regulations, you can simply submit the building and planning application together at once.

If you are considering building a wooden conservatory in your home, it’s normal to be curious about whether or not the home improvement effort is costly. Basically, wooden conservatories are ones that have been constructed using a wooden structure. There are options to choose from which timber and this can also play a part in the amount you’ll have to pay. Conservatories using hardwood, which are more durable and requires less preparation, are also considerably costlier than the softwood counterpart.

For just the timber in a kit build your own conservatory you would be looking at around £10,000 to £20,000. Generally, a wooden conservatory built for you will cost you a range between £20,000 to £50,000 based on the type of wood, the size as well as the style you opt for.

In addition, wooden conservatory prices are also determined by the supplier you’re dealing with. As a result, it’s advisable to conduct a proper and detailed market research about the available suppliers and identify the one who truly offers quality materials at an affordable rate. If you wish to go for an Oak frame, the price will typically be higher.

To give your house a more traditional look, you can go for a timber conservatory rather than a uPVC one. However, it requires more maintenance than the uPVC as well as regular weatherproofing to prevent it from warping or rotting as a result of changes in humidity or temperature. If you want the timber look there are options with modern uPVC which can give a similar style but at a lower cost.

Is It Worth Replacing My Conservatory Roof?

Your conservatory is a very useful part of your home that can be incorporated for many different purposes. Whether you just wish to take advantage of the extra living space to sit and unwind or share memorable moments with your family and friends, the conservatory is always on hand to provide the perfect venue. Therefore, regardless of how you choose to use the structure, it’ll always be an important part of your home. It also features important rooms in your home such as kitchens and bedrooms, making it crucial to make them usable all year round. A common complaint of several homeowners is that their conservatory are usually unusable during the hot days in the summer months and the cold days in the winter months. These common problems can be solved with a single solution - a tiled roof. This type of roof can keep your conservatory insulated and super comfortable all year round. Below are some of benefits you get to derive from replacing your conservatory roof.

✓ It helps maintain temperature. Regular conservatory roofs are built with a material known as polycarbonate. This material is only able to deliver a small amount of insulation which is why your home feels super uncomfortable whenever the weather isn’t favourable. This can be replaced with tiled roofs which are known to be have super high levels of insulation that make your conservatory usable all throughout the year.

✓ It gives your conservatory the converted interior appearance. If you’re bored with the look and original design of your conservatory or perhaps you simply want it to look more like a part of your home. You can also consider replacing your conservatory roof which can give it the converted interior appearance.

✓ It makes for a quieter and more peaceful space in your home. With too much noise everywhere, installing a tiled roof can go a long way to keep the noise out.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

No matter how small or little your lean to conservatory is, the benefits that can be derived from it remains immense. Not only does it add to the value of your home by making it more attractive to potential buyers and securing you a long term investment, but it can also serve as a relaxation or hang out spot with family and friends. In fact, with the lean to conservatory’s simplistic design, it happens to be an economical way to extend your home and also to maximize your living space. If you’re considering to build a small lean to conservatory on your property, then you’d probably want to know exactly how much this is going to cost. In this post, we’re going to look at the price involved in constructing a small lean to conservatory.

When it comes to building a lean to conservatory, there are a bunch of factors that’ll play a key role in the final cost of the project. For example, you’d have to make a decision on the glazing options, roof type, size and more. All these factors will have a huge impact on the final cost you’re going to incur to complete the project. For instance, a polycarbonate roof material lean to conservatory with a size of 3500mm x 2000mm will cost within a range of £7000 to about £8000, while a glass roof material lean to conservatory of the same size will cost within the range of £7500 to about £8500. In order to get a more accurate cost estimate for your small lean to conservatory project, there’s the need to call in a professional to discuss your specific requirements as well as budget.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.

Due to temperature changes, conservatory window seal expand and contract over time which may lead to them wearing out eventually. If you’re facing a similar issue with your conservatory window seal, then you’d probably want to know how you can go about the repair. If yes, then you’ve come to the right place! In this post we’re going to take you through the conservatory window seal repair process. Let’s take a look!

First and foremost, let consider how to determine if your windows needs to be resealed. This is a very simple procedure as a visual check can help identify whether or not the window needs to be resealed. Simply watch out for the area where the windows meets with the frame as well as the point where various sections of windows meet with one another. You should observe whether there’s an obvious sign of wear and tear, gaps and cracks in the seal. If any is found, then your conservatory window seal will have to be repaired as soon as possible. Another important indicator is a draught coming from the window area or visible condensation signs on internal panels of the glass panes.

When it comes to the resealing of windows, it’s highly recommended that you call in a professional. However, if you wish to carry out the task by yourself as an experienced DIYer, then it would be wise to take extra caution. If done the wrong way, this is likely to generate further issues along the road while also allowing more heat to escape your conservation