Find a Conservatory Installer you can trust near you.

So have you are considering having a David Salisbury orangery in your home? It’s a stylish and visually appealing extension which adds immense value to your property when it comes to resale. Almost every home buyer wants a house with a nice orangery and even more so, if it’s a David Salisbury orangery. However, the cost of constructing a David Salisbury orangery is dependent on a wide range of factors which includes your location ( within the UK), the size of the building, the orangery style in question, the materials to be incorporated as well as the finish you’re expecting to get.

Typically, to construct a David Salisbury orangery, you’d need to spend a sum between £10,000 to £70,000. This differences in price is based on the influences that have been stated earlier which includes the type as well as size of the selected David Salisbury orangery. If you wish to construct the small David Salisbury orangery featuring a uPVC frame, you can get that done at a price not less than £10,000, but this price can cost up to £60,000 or even more if you want a large, timber-framed orangery built. Meanwhile if you prefer a premium quality and timber-framed David Salisbury orangery that comes with a new fitted kitchen, it may cost up to £70,000 in expenses (when you add the price of the new kitchen units as well as appliances).

The finish you want to achieve is also one of the greatest influential factors that determines the cost of your David Salisbury orangery. For just the bare essentials (low end), the cost is between £10,000 to £20,000, meanwhile the cost for the mix of both basic and personalized items is within a range of £20,000 to £40,000. However, if you want a classy and distinctive David Salisbury orangery with superior quality fixtures and fittings, a more accurate cost estimate will range between £35,000 to £60,000.

Adding a lean to conservatory to your home or property comes with a whole lot of benefits. It provides you with the much needed additional living space within your property, add value to your home and creates a link between your home and garden. As advantageous as it is, one of the major concerns several homeowners have is whether or not is requires a planning permission. This is a crucial question that must be answered before you make financial commitment to the project. If you don’t know what you’re doing the entire process can be very tedious and you definitely do not want to go through the stress of completing your remarkable new conservatory, only to be instructed to have it removed again. In this post, we’re going to consider if obtaining a planning permission is required before adding a lean to conservatory to your property.

Generally, adding a lean to conservatory to a property is considered to be a “Permitted Development, which implies that you won’t have to apply for a planning permission to complete the project without any risk of interruption from the appropriate authorities. However, there certain circumstance that’ll require a planning permission. These circumstances include:

• If the conservatory covers more than 50 percent of the land around the main house.
• If the conservatory will be placed on the side of the house that faces the road.
• If the conservatory will be higher than the highest point of the main building’s roof.
• If the main building is lower than the height of the eaves and ridge.
• If the conservatory will be constructed to the side of the house and more than a single storey or it goes higher than 4 metres.
• If the conservatory will be wider than the width of the main building, if it’s to be built beside it.
• If the conservatory will be constructed at the rear and higher than 4 metres.

When it comes to extending your home or creating more living space, you can either construct an extension, transform a current space or add a conservatory. While all the three available options to create more living space in your home are worth giving a shot, the wooden conservatory happens to be the easiest and cheapest of them all. If you are thinking about building wooden conservatory of your own, then you’d probably want to know exactly how much its going to cost. The simple answer is that it depends on multiple factors such as the type of wood required, the size, style as well as the quality of materials to be incorporated in your final conservatory design.

The most significant determinant, however, is the type of wood required. Below is a breakdown of the prices based on this factor:

• Hardwood Conservatory

Hardwood such as elm and beech are one of best options for building conservatories due to their complex structure which helps increase the durability and stability of conservatories. The price of an average hardwood conservatory without fitting usually ranges £10,000 to £15,000.

• Oak Conservatory

Due to its popularity and high availability, oak is a very common wood type used in the construction of conservatories. And as a result, it can be gotten within a range of £9,000 to £10,000 for just the wood. Oak can also be made to be resistant to bugs and pests. The price of this type of oak wooden conservatory jumps to around £15,000 to £20,000.

• Timber Conservatory

This refers to various types of wood that’s readily available before being subjected to treatment in different plants or factories. Due to its rather rough exterior and lack of a clean finish, this type of wood is usually gotten at a giveaway price. Depending on the type of wood, the price to buy just a timber conservatory kit can vary between £10,000 to £20,000.

Click here to learn more about wooden conservatories

Generally, if you want to do a job, you can as well ensure that’s done properly. You may be considering building a small base for an orangery, but no matter how small it is, it just shouldn’t be done to any other than a compliant standard, and that’s whether or not an approval is needed. When it comes to building work which is covered by Building Regulations, you are required to comply (by the law) with the regulations and to make use of one of the two types of Building Control Service available. These includes the Building Control Service given by your local authority or the Building Control Service given by approved inspectors.

Regardless of the service you opt for, you’re going to pay but the preferred service may offer an advice before commencement of the project. The individual carrying out the building work is charged with the responsibility of ensuring total compliance with the regulations. Therefore, if you select to undertake the project by yourself, the responsibility is primarily on you. In the same vein, if you opt for a building company the responsibility would be the company’s, but you should always ensure to confirm this position before commencement of the project. You must also take note that you may be served with an enforcement notice if you fail to comply with the regulations as the owner of the building. So it’s advisable that you choose your builder very carefully.

There are a bunch of elements you may require approval for like the structural integrity, appropriate insulation levels, or the construction of a building over drainage or sewage. In cases where it’s obvious that you’d need building regulations, you can simply submit the building and planning application together at once.

Whilst you may think conservatories are nearly all made from glass, this doesn’t have to be the case. If you live in a built-up area you could have a tiled rooftop to enable extra privacy, use obscure glass and even invest in blinds.Be aware that solid walls are possible but if the conservatory is manufactured with less than 50% of glass, you’ll need Buildings Regulations approval.

How To Put A Tiled Roof On A Conservatory

The roof is a vital part of any structure as it protects it from the elements such as snow, rain and lots more. When you have a conservatory built, the roof is just as important as that of the rest of the house. After all, both you and your loved ones will spend a lot of time there over several years, so you can as well give it a proper protection from the elements. So if you’re thinking about installing a tiled roof on your conservatory by yourself, you’ve come to the right place! However, it must be said that this is no easy task and should not be attempted as a DIY task if you do not have a proper training or the confidence needed to pull it off.

✓ Due to the fact that there are a wide range of tiled roofs to choose from, you have to think about the type of tiled roof you need before you proceed. The basic ones include composite panels, slate, synthetic tiles as well as concrete tiles.

✓ Examine the framework. It’s important to make sure that the framework possesses the right structure before adding theroof

✓ Remove the old roof panels. There’s the need to remove the poorly insulated glazed conservatory roof before installing the new tiled roof for a great efficiency.

✓ Change the existing roof frame. Apparently, there’s also a need to detach the older roof frame in order to install the new tiled roof. You have to change the old frame to one that’s suitable for the new tiles to be attached to.

✓ Add the tiles. To add the tiles. Simply lay them out across the roof and clipped on. This shouldn’t take that much time since a conservation isn’t a usually a big structure.

Lean-to conservatories are often known as Mediterranean conservatories or sunrooms and are a great way to add more living space when you’ve only got a small amount of room to work with. They usually have clean lines, a rectangular shape and attach to the side or rear of your home, which makes them one of the easiest conservatory types to build yourself.

So how do you build a wooden lean-to conservatory? The first step is to decide what you want it to look like. Most lean-to conservatories are constructed of glass and the wood frame, but you can choose to have dwarf walls too. Dwarf walls are low brick walls that are useful if you’re planning to plumb in radiators, have air conditioning installed or put plug sockets in the conservatory.

When you’ve decided what your wooden lean-to conservatory is going to look like, you’ll need to get the materials. You’ll need to choose a hardy wood – oak is the most expensive but also the most durable – and source glass for the windows. You’ll also need to decide on a roof material and work out the correct pitch.

The first step to building your wooden lean-to conservatory is to dig the foundations. You’ll then need to level the earth, then add concrete to the correct height, which should be lower than your property’s existing damp course. Then, you’ll build up to the damp course, which will be your conservatory’s floor level. Don’t forget to make sure it’s even.

If you’re building a dwarf wall, start it from the base and build up to no more than 1 metre high. Once the cement is dry, place external sills on top of the dwarf wall. You’ll then need to secure the frames; start with the one that secures to your property, then do the same for the rest, connecting outwards until they meet from the two sides. Then put up your doors.

Now it’s time to build the roof. This should be simple if you’ve bought your own custom-made kit. Place the roof ridge on top of the frames, then add the roof rafters between the roof ridge and hip bars. Fit your glazing sheets and guttering – it’s important that your wooden conservatory roof has guttering just like your house, otherwise your conservatory roof won’t last very long and could even cause rainwater to rot your wooden frames.

Once you’ve built your wooden lean-to conservatory, all that’s left is to decide on how you want to decorate it. But if this all sounds like too much, get in touch with specialist wooden conservatory installers who will be able to give you a quote for building you a lean-to conservatory.