Find a Conservatory Installer you can trust in Havering.

What Is A Conservatory?

A conservatory is basically a structure constructed on a property that’s usually attached to the side of a home. It’s a room as well as a greenhouse that’s constructed with the help of a wide range of materials which includes bricks, wood, glass and polycarbonate. A conservatory is typically built with a great amount of glass which enables it to offer huge amount of sun and light. During construction, the idea is always to muster sufficient sunlight for the plants while also enabling a cosy room within the structure especially during the cold months. Generally, conservatory extensions’ walls are made of over 50 percent of glass, while their roofs are usually made up of more than 75 percent glass.

Thanks to the advancement in technology, conservatories have also greatly developed over the years. They’ve significantly evolved from the usual luxury greenhouses to normal and everyday home extensions. Conservatories have also grown to become very energy-efficient while also providing super comfort to the extent that they’re now being used throughout the year. And while it’s formerly known to be an occasional room, it’s now more of a home’s extension.

Legally, conservatories are usually covered by what’s called the permitted development rights which exempts them from both planning permission and building regulations. The conditions below form the legal definition of a conservatory to differentiate it from an extension.

✓ Below 30 square metres in size

✓ Constructed at ground level

✓ Separated from the main building by external walls, doors or windows.

✓ Possesses its own stand alone heating system

✓ The glazing as well as fixed electrical fittings are in compliance with the relevant building regulations.

Building a conservatory can be a challenging task. But whether you plan to hire a professional to build your aluminium conservatory or are considering DIY, it’s good to start with a rough idea of how the process works.

It’s essential to begin with a strong conservatory base. The area needs to be measured out carefully and then dug out. You then need to level the earth and pour in concrete. Your damp proof course goes on top of this, preventing rising damp from entering your structure and creating the floor level.

Then, you need to build your conservatory walls. Start by building your dwarf wall, positioning the external sills on top. Next, fix in the frames and hang your doors. Sit your roof ridge on top of the frames, and add the roof rafters.

Finally, you need to fit the glazing sheets and guttering. Once this is all done, your new aluminium conservatory is ready to go!

Aluminium conservatories are really easy to maintain, making them a top choice for many homeowners. Unlike wooden conservatories, they don’t need regular treatment to ensure they don’t deteriorate.

The most you’ll need to do to keep your aluminium conservatory looking great is give the frames and glass an odd wipe with water and a mild detergent to get rid of any occasional dirt.

Due to temperature changes, conservatory window seal expand and contract over time which may lead to them wearing out eventually. If you’re facing a similar issue with your conservatory window seal, then you’d probably want to know how you can go about the repair. If yes, then you’ve come to the right place! In this post we’re going to take you through the conservatory window seal repair process. Let’s take a look!

First and foremost, let consider how to determine if your windows needs to be resealed. This is a very simple procedure as a visual check can help identify whether or not the window needs to be resealed. Simply watch out for the area where the windows meets with the frame as well as the point where various sections of windows meet with one another. You should observe whether there’s an obvious sign of wear and tear, gaps and cracks in the seal. If any is found, then your conservatory window seal will have to be repaired as soon as possible. Another important indicator is a draught coming from the window area or visible condensation signs on internal panels of the glass panes.

When it comes to the resealing of windows, it’s highly recommended that you call in a professional. However, if you wish to carry out the task by yourself as an experienced DIYer, then it would be wise to take extra caution. If done the wrong way, this is likely to generate further issues along the road while also allowing more heat to escape your conservation

Whilst you may think conservatories are nearly all made from glass, this doesn’t have to be the case. If you live in a built-up area you could have a tiled rooftop to enable extra privacy, use obscure glass and even invest in blinds.Be aware that solid walls are possible but if the conservatory is manufactured with less than 50% of glass, you’ll need Buildings Regulations approval.

The roof is the place that your conservatory is most likely to get grubby, but cleaning it is easy. You shouldn’t need to use any powerful cleaners – just warm water and a mild detergent.

The best tool to use to access your conservatory roof is a telescopic brush. This will help you get into corners and high areas without needing to work from height. You can use a ladder to help you clean your conservatory roof, but you should be very careful to avoid leaning it against any glazing

.

Consider investing in a telescopic cleaner with squeegee, brush and mop attachments to help you achieve a great finish on your aluminium conservatory.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

Conservatories are one of the best options to create more living space in your home. If you thinking about building a hardwood conservatory in your home, then you’d probably like to know exactly how much it’s going to cost you. The truth is, just like many other home improvement efforts, the cost of constructing a hardwood conservatory is dependent on a wide array of elements. While it is crucial to budget for your extension, it is also quite important to note the immense value a top quality hardwood conservatory can add to your home.

Hardwood conservatories look a lot elegant and luxurious, and is surely a necessity for all homes with character ( or a period property). With relative ease and effortlessly, they appear far more superior to any other materials you can think of, even using similar styles. However, a drawback to hardwood is the high maintenance requirements and the fact that they must be treated and painted every couple of years in order to maintain their aesthetic appearance. No one likes a flaking and weathered frame sitting in their compound. Despite this drawback, hardwood offers a wide range of styles and options. If you are building your own then you can bespoke the joinery styles for the carved frames, multiple colour options and lots more.

Amongst the best hardwood types for building conservatories are elms and beeches. They are very common due to their ability to increase the stability and durability of conservatories. An average hardwood conservatory kit will cost within the range of £10,000 to £20,000.

Apart from the good looks of hardwood conservatories, it also brings about a plethora of benefits which the owner can enjoy. Not only does it add more living space to your home and beautifies it, but also goes a long way to add great value to your home. It's a big task doing a DIY conservatory so make sure you are fully prepared before you start.