Find a Conservatory Installer you can trust in Salford.

Do You Need A Building Reg For A Conservatory?

If you’re planning to build a conservatory in your home, it’s only logical to consider whether or not you require a building reg for such a structure. Generally, several conservatories, summer buildings, sheds as well as outbuildings do not require building regulation approval to erect. One of the applicable rules is the fact that if they’re ( small or less than 30m2) or constructed with non combustible material, or are differentiated from structures nearby or land and don’t feature sleeping accommodation or room, then they’re not required to submit a building regulations approval application. However, it’s strongly recommended to check with your local authority before you commence the project as only they can provide the most accurate information.

Generally, conservatories should be primarily built of translucent walls and roofs, while also possessing an external type door separating them from the main building within a property. What’s more? The foundations and floors, however, can be laid in a number of ways, but you’ll have to put into consideration the conditions of the ground, trees as well as the existing drains. It’s also a wise decision to include insulation which makes the structure a lot easier to heat especially during the cold months.

Overall, conservatories are usually exempt from building regulations if the following conditions are met:

✓ If the conservatory is erected at ground level and are not up to 30 square metres in floor area.

✓ If the structure is separated from the rest of the house with an external quality walls, windows or doors

✓ If the conservatory features an independent heating system with different temperature as well as on/off controls

✓ If the glazing and electrical installations are in total compliancewith the relevant regulatory requirements.

How To Put A Tiled Roof On A Conservatory

The roof is a vital part of any structure as it protects it from the elements such as snow, rain and lots more. When you have a conservatory built, the roof is just as important as that of the rest of the house. After all, both you and your loved ones will spend a lot of time there over several years, so you can as well give it a proper protection from the elements. So if you’re thinking about installing a tiled roof on your conservatory by yourself, you’ve come to the right place! However, it must be said that this is no easy task and should not be attempted as a DIY task if you do not have a proper training or the confidence needed to pull it off.

✓ Due to the fact that there are a wide range of tiled roofs to choose from, you have to think about the type of tiled roof you need before you proceed. The basic ones include composite panels, slate, synthetic tiles as well as concrete tiles.

✓ Examine the framework. It’s important to make sure that the framework possesses the right structure before adding theroof

✓ Remove the old roof panels. There’s the need to remove the poorly insulated glazed conservatory roof before installing the new tiled roof for a great efficiency.

✓ Change the existing roof frame. Apparently, there’s also a need to detach the older roof frame in order to install the new tiled roof. You have to change the old frame to one that’s suitable for the new tiles to be attached to.

✓ Add the tiles. To add the tiles. Simply lay them out across the roof and clipped on. This shouldn’t take that much time since a conservation isn’t a usually a big structure.

If you’re worried about your conservatory being too hot in the summer and too cold in the winter, you can insulate it. Older conservatory roofs are made from inefficient polycarbonate, which means that up to 25% of all the heat lost in a conservatory escapes from the roof.

To insulate your conservatory roof, you can install blinds or curtains – but they can go mouldy from condensation. There are two other options that are more long-term that could be better: upgrading the polycarbonate in the roof or opting for a solid conservatory roof.

You can add a thicker polycarbonate roof panel with better thermal efficiency if the glazing bars on your conservatory will expand to fit. This will offer better insulation, but may not last very long – maybe less than 10 years.

A solid conservatory roof is a new way of making your conservatory usable all year round. Most existing conservatory frames will be able to support a lightweight metal structure and slate-like tiles to match your home’s roof. Or you can opt for a hybrid option where the solid and glass parts are merged together. This will insulate your conservatory roof so it never gets too hot or too cold.

Do I Need Planning Permission For A Wooden Conservatory?

The addition of a conservatory to your home is classified as a “permitted development and according to the 2008 legislation, you do not need to apply for a planning permission to add a wooden conservatory to your home so far you are within some particular limits. These regulations are summarized below:

• All extensions must not be more than one storey and the height must be lower or equal to the existing building’s roof or 4m at the maximum.

• There are multiple limitations on the extent you can extend from your existing property depending on a few factors such as the type of your house as well as the location of the extension, be it at the rear or side of the building.

• If your wooden conservatory is to be constructed at the rear, it must not go beyond 3 metres from the attached house’s original property and 4 metres in a detached house. Also, the wooden conservatory mustn’t go beyond half the space around the property.

• The wooden conservatory must not go beyond half the size of the original house. Similar conditions govern that of the space around the existing building.

• Extensions that are not covered by the permitting rights are the ones constructed in front of the property or those directly facing the main street or road.

• Listed Building content may be needed in the event whereby there’s a Listed Building proposed work.

This is just a brief of the conditions that applies, however, the fact remains most property owners can have a wooden conservatory installed without having to apply for planning permission. It is advisable to consult your local planning office before you construct an extension. In certain cases, all work may require planning permission if there’s a permitted development rights removal. Click here to learn more about wooden conservatories

The main features of a lean to conservatory is a flat angled roof which is backward sloping. This type of conservatory is best added to houses which do not have height or possesses only a small space. If you’re looking to install a lean to conservatory in your home or property, one of the first things you’d have to consider is the cost of getting it done so you can set a budget and start planning. In this article, we’ll give you an idea of how much a lean to conservatory price is, so you can have a rough estimate for your conservatory requirements.

Generally, the average cost of conservatory can be within the range of £5000 to £20000 and of course this depends on both the design and home. There are a number of influencing factors that can play a key role when it comes to determining how much you’ll be paying for your conservatory. Some of these factors include the size, style, material, colour as well as the roof type. All of these factors can greatly determine the overall price of your lean to conservatory, so you’d most likely have to approach the acquisition process as a multi-staged concept so as to get the perfect fit for your home in every level.

So with these factors in mind, a lean to conservatory style with a polycarbonate roof material will range between £8100 to £11900. A lean to conservatory style with a glass roof material will range between £9000 to £13200. Overall, the lean to style prices usually ranges from £3900 to £20000 depending on the size of the structure.

In 2002 the Government amended Building Regulations governing the replacement and installation of glazing units. For the first time, windows had to meet energy efficiency standards and tough thermal performance levels. For new window units you must have efficiency ratings of at least a level C.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.