Find a Conservatory Installer you can trust near you.

If you’re worried about your conservatory being too hot in the summer and too cold in the winter, you can insulate it. Older conservatory roofs are made from inefficient polycarbonate, which means that up to 25% of all the heat lost in a conservatory escapes from the roof.

To insulate your conservatory roof, you can install blinds or curtains – but they can go mouldy from condensation. There are two other options that are more long-term that could be better: upgrading the polycarbonate in the roof or opting for a solid conservatory roof.

You can add a thicker polycarbonate roof panel with better thermal efficiency if the glazing bars on your conservatory will expand to fit. This will offer better insulation, but may not last very long – maybe less than 10 years.

A solid conservatory roof is a new way of making your conservatory usable all year round. Most existing conservatory frames will be able to support a lightweight metal structure and slate-like tiles to match your home’s roof. Or you can opt for a hybrid option where the solid and glass parts are merged together. This will insulate your conservatory roof so it never gets too hot or too cold.

When you build a new wood-constructed conservatory, or any type of conservatory, you’ll need to dig a trench for the footings. You’ll need to dig to a minimum depth of 600mm and at least 300mm below your property’s damp proof course. When you dig down, you might expose obstacles such as underground pipes.

If this happens, you’ll need lintels for your wood-constructed conservatory. These are usually concrete and protect the pipes or obstructions from being crushed. You may also want to use steel mesh for additional support.

Building Regulations state that if an opening is formed in a wall, the structure above the opening needs to be supported. This will be especially relevant if you’re building a wooden lean-to conservatory. It says that there are two ways that you can use lintels to provide support.

The first way involves using a steel lintel to support both the inner and outer leaf of a cavity wall. It can then serve as a cavity tray that directs moisture from the cavity through the outer skin of the wall as well.

The second way to use lintels is to use two steel or concrete lintels. They support each leaf of a cavity wall construction. You’ll need separate thermal insulation and a cavity tray as well.

Whatever type of lintel you use, it should have a suitable bearing onto the wall at each side. If you’re not sure, speak to the manufacturer of your wood-constructed conservatory, or ask a reputable company to install it for you.

The short and simple answer to this question is yes, just like other new extensions, you must have a foundation done for your lean to conservatory. In order to transfer the building’s weight to the floor safely, there’s a need to construct a foundation. Without it, the structural integrity of the extension would be heavily compromised. What’s more? While there’s no minimum depth requirement for a lean to conservatory, there are multiple factors that can affect the depth as well as type of the foundation. Let’s take a look!

• The nearby trees. What trees do is to absorb water from the soil which can affect the foundation significantly. When water is absorbed from the soil, the soil shrinks which affects the foundation’s strength. The size as well as type of the tree will determine the extent of the water absorption from the ground.
• The soil’s suitability. The weight that each soil can withstand varies and even more so, when environmental factors have more effect on certain types of soils than others. For instance, chalk is able to drain water away relatively easily which means that nearby trees will only have a little effect on its quality. Clay, on the other hand, shrinks when drying and also retains a lot of water. This means that nearby trees will have huge impact on clay soil which will compromise the structural integrity of the lean to conservatory. Therefore, since changes to clay mostly occur to about 0.75m depth, foundations on the soil should be constructed deeper to compensate.
• Undisturbed ground. Before the foundations are laid, there’s a need to identify grounds that hasn’t been built on and this usually takes a depth of about 1m (this figure may vary especially in regions where drains have been laid).

Adding a lean to conservatory to your home or property comes with a whole lot of benefits. It provides you with the much needed additional living space within your property, add value to your home and creates a link between your home and garden. As advantageous as it is, one of the major concerns several homeowners have is whether or not is requires a planning permission. This is a crucial question that must be answered before you make financial commitment to the project. If you don’t know what you’re doing the entire process can be very tedious and you definitely do not want to go through the stress of completing your remarkable new conservatory, only to be instructed to have it removed again. In this post, we’re going to consider if obtaining a planning permission is required before adding a lean to conservatory to your property.

Generally, adding a lean to conservatory to a property is considered to be a “Permitted Development, which implies that you won’t have to apply for a planning permission to complete the project without any risk of interruption from the appropriate authorities. However, there certain circumstance that’ll require a planning permission. These circumstances include:

• If the conservatory covers more than 50 percent of the land around the main house.
• If the conservatory will be placed on the side of the house that faces the road.
• If the conservatory will be higher than the highest point of the main building’s roof.
• If the main building is lower than the height of the eaves and ridge.
• If the conservatory will be constructed to the side of the house and more than a single storey or it goes higher than 4 metres.
• If the conservatory will be wider than the width of the main building, if it’s to be built beside it.
• If the conservatory will be constructed at the rear and higher than 4 metres.

A polycarbonate conservatory roof is made using a polycarbonate which is a contemporary plastic material that features several beneficial properties which gives it a high optical clarity as well as a good durability. Visually, it’s very similar to glass but its a lot more resistant to impact  which makes it just as strong as some metals. As a result, there are a lot of cases where polycarbonate is used as a replacement for security windows and more. If you happen to possess a polycarbonate conservatory, then you’d probably like to know how you can fix it in case of any damages. In this post, we’re going to consider how to repair polycarbonate conservatory roofs. Let’s take a look!

There are a bunch of effective methods you can consider for fusing or gluing polycarbonate plastic. Glues will leave an adhesive behind, while fusing results in a chemical reaction which enables the material to melt back together. Here is a great method you can use to repair polycarbonate plastic:

• Use of methyl methacrylate. Due to the fact that this creates a strong, resilient bond, methyl methacrylate is the best way to fuse polycarbonate. According to some of the users, if they try to pull the polycarbonate apart the unaffected part will break before the bond does. During the application of methyl methacrylate, you’d have to ensure you’re in a well ventilated area or outdoor. This is because the fume generated from methyl methacrylate can be toxic if it’s inhaled in a high concentration.

There several benefits to be derived from constructing a wooden conservatory. Not only do they have an immense visual appeal that’s difficult to rival, but also offer a plethora of other benefits as well. You get to choose from a variety of styles, wooden conservatories are versatile as the wood can be carved to your taste, they can come with a warranty between 10-25 years, they are strong and durable, and finally, they go a long way to increase your property value.

With that in mind, there are a wide range of wood types that are available in the market which you can choose from and the best option largely depends on varying factors. These includes your preference, budget and many more. Below are some types of woods you can consider to construct your new extension.

• Oak

This is a very popular wood type ( especially in the UK) when it comes to constructing wooden conservatories, thanks to its top notch hard wood.

• Iroko

This is a special type of hardwood that possesses a very lengthy lifespan, just like an oak. Due to its extraordinary quality, this wood type can be very rare to come by which implies a really costly price tag.

• Sapele

This is a type of wood that is widely known for its strength. It is very durable and comes with a great finish.

• Mahogany

Mahogany is an exceptionally strong wood that’s a lot resistant to warping than most of the other woods. It possesses a red colour which will turn to grey overtime.

• Idigbo

Only top wood experts can actually differentiate between a stained idigbo and an oak. Being a light wood, idigbo is usually a cheap option and absolutely very easy to work with.

Click here to learn more about wooden conservatories

Conservatories and orangeries look very similar, so it can be hard to tell what their differences are. The main thing that distinguishes the two is the amount of glazing they have.

Conservatories usually have a roof that is made up of at least 75% glass. Orangeries, on the other hand, have roofs that are generally less than 75% glass.

Conservatories also tend to have walls that are made up of at least 50% glass. However, orangeries have glass on less than 50% of the wall area.

Orangeries were originally developed to grow oranges in large stately homes. Their mixture of brick and glazing gave the oranges a combination of plenty of sunlight and shelter.